Air Impact Wrench manufacturer profile

AEROPRO TOOLS

AEROPRO TOOLS is an air impact wrench manufacturer based in China. [S1]

Country
China [S1]

Evidence scope

The retained official product route documents: Aeropro Air Tools Co.,Ltd. – Aeropro Air Tools Co.,Ltd. This dossier uses that cited route as the editorial scope. [S11]

Air Impact Wrench

Aeropro Air Tools Co.,Ltd. – Aeropro Air Tools Co.,Ltd. [S11]

Documented specifications for Air Impact Wrench
Materialaluminum [S3]
Working pressure90PSI(6.3Bar) [S4]
Square drive1/2” [S5]
Thread size5/8″(16mm) [S6]
Free speed7800RPM [S7]
Working torque810Ft-Lb(1100N.m) [S8]
Air inlet NTP1/4” [S9]
Average air consumption6.5cfm [S10]

Product range and documented series

Aeropro Air Tools Co.,Ltd. – Aeropro Air Tools Co.,Ltd. [S11]

  • Material: aluminum [S3]Evidence scope: MaterialSource note: 8.The weight of the aluminum alloy gun body is only 2.4kg.
  • Working pressure: 90PSI(6.3Bar) [S4]Evidence scope: Working pressureSource note: Model: A398 • Working Pressure: 90PSI(6.3Bar)
  • Square drive: 1/2” [S5]Evidence scope: Square driveSource note: Model: A398 • Working Pressure: 90PSI(6.3Bar) • Square Drive: 1/2”
  • Thread size: 5/8″(16mm) [S6]Evidence scope: Thread sizeSource note: Model: A398 • Working Pressure: 90PSI(6.3Bar) • Square Drive: 1/2” • Thread Size:5/8″(16mm)
  • Free speed: 7800RPM [S7]Evidence scope: Free speedSource note: Square Drive: 1/2” • Thread Size:5/8″(16mm) • Free Speed: 7800RPM
  • Working torque: 810Ft-Lb(1100N.m) [S8]Evidence scope: Working torqueSource note: Free Speed: 7800RPM • Working Torque: 810Ft-Lb(1100N.m)
  • Air inlet NTP: 1/4” [S9]Evidence scope: Air inlet NTPSource note: Working Torque: 810Ft-Lb(1100N.m) • Air Inlet (NTP): 1/4”
  • Average air consumption: 6.5cfm [S10]Evidence scope: Average air consumptionSource note: Air Inlet (NTP): 1/4” • Air Hose(ID): 3/8” • Avg.air Consumption: 6.5cfm

Documented specifications

Materialaluminum [S3]
Working pressure90PSI(6.3Bar) [S4]
Square drive1/2” [S5]
Thread size5/8″(16mm) [S6]
Free speed7800RPM [S7]
Working torque810Ft-Lb(1100N.m) [S8]
Air inlet NTP1/4” [S9]
Average air consumption6.5cfm [S10]

Markets and applications

AEROPRO TOOLS model A398 is a 1/2” pneumatic impact wrench with a 5/8″(16mm) thread size, designed for assembly and fastening applications in automotive and industrial workshops. Operating at 90PSI(6.3Bar) with a free speed of 7800RPM and working torque of 810Ft-Lb(1100N.m), it suits heavy-duty tasks such as removing wheel nuts, suspension bolts, and structural fasteners. The 1/4” NTP air inlet and 3/8” air hose connect to standard shop air supplies, while average air consumption of 6.5cfm keeps demand moderate. Its 192mm overall length, 2.4kg aluminum alloy body, and 5.25Lbs(2.39kg) net weight make it appropriate for prolonged handheld use.

Frequently asked questions

What Air Impact Wrench product is documented for AEROPRO TOOLS?

The retained product material names Material: aluminum. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S3]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.