Knife Gate Valve manufacturer profile

AVK International A/S

AVK International A/S is a knife gate valve manufacturer based in Galten, Denmark. [S2][S1]

Country
Denmark [S1]
City
Galten [S2]

Evidence scope

The retained official product route documents: AVK supplies valves, hydrants and accessories for water and gas distribution, wastewater treatment and fire protection. This dossier uses that cited route as the editorial scope. [S10]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S9]

Knife Gate Valve

Documented specifications for Knife Gate Valve
Published product factAVK Series 779/91 uni-directional wafer-type knife gate valve, PN 10, with cast-iron body, stainless-steel blade, PTFE packing and EPDM seal [S4]
Published product factAVK centric double-flanged butterfly valve, PN 10/16, with short fixed NBR liner and duplex disc [S5]
Published product factAVK Series 41 metal-seated swing check valve, PN 16, DN 350 to 600 [S6]
Published product factAVK 715/30-004 flanged gate-valve packages with double-acting pneumatic actuators, DN 65 to 350 [S7]
Published product factAVK Series 702 electrically operated knife-gate valve packages with AUMA electric-actuator selection tables [S8]

Product range and documented series

AVK supplies valves, hydrants and accessories for water and gas distribution, wastewater treatment and fire protection. [S10]

  • AVK Series 779/91 uni-directional wafer-type knife gate valve, PN 10, with cast-iron body, stainless-steel blade, PTFE packing and EPDM seal [S4]Source note: AVK KNIFE GATE VALVE, WAFER TYPE, PN10. Cast iron body, SS-304 blade, PTFE packing, EPDM seal, handwheel/gearbox, uni-directional.
  • AVK centric double-flanged butterfly valve, PN 10/16, with short fixed NBR liner and duplex disc [S5]Source note: AVK CENTRIC DOUBLE FL. BUTTERFLY VALVE, PN 10/16. Short, fixed NBR liner, duplex disc.
  • AVK Series 41 metal-seated swing check valve, PN 16, DN 350 to 600 [S6]Source note: AVK SERIES 41 swing check valve with metal seat, for use in pumping applications to prevent back flow. PN 16. DN 350 - 600.
  • AVK 715/30-004 flanged gate-valve packages with double-acting pneumatic actuators, DN 65 to 350 [S7]Source note: AVK GATE VALVE, FLANGED W/ACTUATOR, PN10. With double acting pneumatic actuator. DN65-350.
  • AVK Series 702 electrically operated knife-gate valve packages with AUMA electric-actuator selection tables [S8]Source note: 5.3 ELECTRIC OPERATED VALVES. Table no. 5. Selection of AUMA actuator for on/off duty.
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate identity and location are retained from AVK's official contact context. Company scope is retained from the official AVK site. Series 779/91 knife-gate, the double-flanged butterfly model, Series 41 check-valve, 715/30-004 pneumatic-actuator package and Series 702 electric-actuated valve-package evidence are retained from AVK's official data sheets and instructions. [S9]Company-stated

Frequently asked questions

What Knife Gate Valve product is documented for AVK International A/S?

The retained product material names AVK Series 779/91 uni-directional wafer-type knife gate valve, PN 10, with cast-iron body, stainless-steel blade, PTFE packing and EPDM seal. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.