Needle Valve manufacturer profile

BMT Co., Ltd.

BMT Co., Ltd. is a needle valve manufacturer based in Busan, Republic of Korea. [S2][S1]

Country
Republic of Korea [S1]
City
Busan [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Published pressure point
The cited integral-bonnet range is specified to 6,000 psig / 413 bar at 100 °F. [S4]
Published options
The range names stainless-steel, brass and Monel material options, with PTFE and graphite temperature variants. [S5]
Integral Bonnet Needle Valves
Official product image [S6]

Evidence scope

The retained official product route documents: SUPERLOK documents Integral Bonnet Needle Valves under BMT's official product drawings route. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Needle Valve

Documented series: BMT SUPERLOK Integral Bonnet Needle Valves.

SUPERLOK documents Integral Bonnet Needle Valves under BMT's official product drawings route. [S6]

Documented specifications for Needle Valve
Service temperature232°C [S9]
Pressure rating413 bar [S10]
Materialstainless steel [S11]
Published pressure point
The cited integral-bonnet range is specified to 6,000 psig / 413 bar at 100 °F. [S4]
Published options
The range names stainless-steel, brass and Monel material options, with PTFE and graphite temperature variants. [S5]
  • BMT SUPERLOK Integral Bonnet Needle Valves. [S6]

Selection fit: Start with BMT SUPERLOK Integral Bonnet Needle Valves when the cited pressure point and published material/packing variants suit the duty. Confirm medium, temperature, selected alloy and final configuration with BMT. [S7]

Product range and documented series

SUPERLOK documents Integral Bonnet Needle Valves under BMT's official product drawings route. [S6]

  • BMT SUPERLOK Integral Bonnet Needle Valves. [S6]Source note: Integral Bonnet Needle Valves

Procurement fit

The procurement entry point for this catalogue is the BMT SUPERLOK Integral Bonnet Needle Valves series when the cited 6,000 psig / 413 bar at 100 °F rating and the documented stainless-steel, brass and Monel material options align with the service duty. PTFE and graphite packing variants are listed as published temperature options. Final alloy, packing, and configuration should be confirmed directly with BMT prior to release.

Technical capabilities

The documented BMT SUPERLOK Integral Bonnet Needle Valves are published to 6,000 psig / 413 bar at 100 °F. Material options are limited to stainless-steel, brass and Monel as named in the cited catalogue text. Packing temperature variants are listed as PTFE and graphite. No additional pressure classes, temperature limits, end connections, seat ratings, or actuation modes are documented in the cited facts.

Markets and applications

The cited catalogue positions the BMT SUPERLOK Integral Bonnet Needle Valves series for instrumentation and process control duties where the published 6,000 psig / 413 bar at 100 °F rating applies. Material variants in stainless-steel, brass and Monel, with PTFE or graphite packing, indicate suitability across common corrosive and non-corrosive service media. Specific end-market segments, named installations, and reference applications are not publicly documented.

Evidence limitations

The cited facts do not publicly document additional pressure classes beyond the cited 6,000 psig / 413 bar figure, nor temperature limits specific to the PTFE and graphite packing variants. End connection types, flow coefficients (Cv), dimensional data, third-party certifications, company size, and specific application case studies are also not publicly documented. Any buyer-relevant field not listed in the source should be requested directly from BMT Co., Ltd.

Editorial summary

BMT Co., Ltd. is a Republic of Korea based manufacturer located in Busan, documented for the BMT SUPERLOK Integral Bonnet Needle Valves series. The company is catalogued under the needle valve category, and the integral-bonnet design is the documented range within the scope. Recent specification activity is not recorded in the cited signals, and no other product families are listed in the source.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Certifications [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • BMT legal identity and Busan location are retained from the official SUPERLOK site. Integral Bonnet Needle Valves selection context and page-bound product image are scoped only to that cited route. Revenue, certification, stock, delivery and service claims were not asserted. [S8]Company-stated

Frequently asked questions

What Needle Valve product is documented for BMT Co., Ltd.?

The retained product material names BMT SUPERLOK Integral Bonnet Needle Valves. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published pressure point should a buyer compare?

The cited product material records: The cited integral-bonnet range is specified to 6,000 psig / 413 bar at 100 °F. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published options should a buyer compare?

The cited product material records: The range names stainless-steel, brass and Monel material options, with PTFE and graphite temperature variants. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.