Hydraulic Motor manufacturer profile

Casappa S.p.A.

Casappa S.p.A. is a hydraulic motor manufacturer based in Lemignano di Collecchio, Italy. [S2][S1]

Country
Italy [S1]
City
Lemignano di Collecchio [S2]

Evidence scope

The retained official product route documents: Casappa publishes hydraulic pump and motor components, including aluminum and cast-iron gear pumps and motors. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S9]

Hydraulic Motor

Documented series: Gear-pump-and-motor product routes, including XLP and Polaris families with aluminum-body PL and cast-iron-body PH routes.

Casappa publishes hydraulic pump and motor components, including aluminum and cast-iron gear pumps and motors. [S6]

Documented specifications for Hydraulic Motor
MaterialALUMINIUM [S10]
Service temperature-40 °C [S11]
  • Gear-pump-and-motor product routes, including XLP and Polaris families with aluminum-body PL and cast-iron-body PH routes. [S4]
  • XHP20 cast-iron-body helical-gear hydraulic pumps with published displacement from 8.06 to 28.01 cm³/rev and maximum continuous operating pressure of 250 bar. [S5]

Selection fit: Use the published XLP and Polaris material-body routes to begin a gear-motor shortlist; then confirm displacement, pressure, shaft, mounting, fluid, rotation, availability and lead time with Casappa. [S7]

Product range and documented series

Casappa publishes hydraulic pump and motor components, including aluminum and cast-iron gear pumps and motors. [S6]

  • Gear-pump-and-motor product routes, including XLP and Polaris families with aluminum-body PL and cast-iron-body PH routes. [S4]Source note: Gear Pumps and Motors; XLP; Polaris [PL] aluminium body; Polaris [PH] cast iron body
  • XHP20 cast-iron-body helical-gear hydraulic pumps with published displacement from 8.06 to 28.01 cm³/rev and maximum continuous operating pressure of 250 bar. [S5]Source note: XHP20 series Cast iron body hydraulic gear pumps with helical gear design; 8,06 cm³/rev to 28,01 cm³/rev; Max. constant operating pressure 250 bar

Procurement fit

For a gear-motor shortlist, the documented guidance is to use the published XLP and Polaris material-body routes as a starting point, then confirm displacement, pressure, shaft, mounting, fluid, rotation, availability and lead time directly with Casappa. Separately, the XHP20 route supports an 8.06–28.01 cm³/rev cast-iron helical-gear-pump shortlist. For XHP20, the documented application areas are construction, material handling, agriculture, forestry and turf-care, and circuit, pressure, speed, fluid, shaft, port, mounting, availability and lead time should be confirmed with Casappa.

Technical capabilities

Within the documented hydraulic motor scope, the gear-pump-and-motor routes are organized into the XLP and Polaris families, with the PL route defined as an aluminum-body configuration and the PH route defined as a cast-iron-body configuration. The XHP20 route is documented as a cast-iron helical-gear pump covering displacements of 8.06–28.01 cm³/rev. Material is documented as cast iron and a service temperature of 5 °C is listed. Specific shaft, port, mounting and performance parameters beyond these documented values are not included in the supplied record.

Markets and applications

For the XHP20 route, the documented application sectors are construction, material handling, agriculture, forestry and turf-care. The XLP and Polaris gear-pump-and-motor routes are described as product families that begin a gear-motor shortlist, with the aluminum-body PL and cast-iron-body PH variants offering different material-body choices. The documented country of manufacture is Italy, with the specified site at Lemignano di Collecchio. Broader sector coverage, end-user references and market share data are not part of the supplied documentation.

Evidence limitations

Several common procurement fields are not publicly documented in the supplied record. Maximum continuous pressure, maximum speed, peak pressure ratings, efficiency figures, shaft options, port configurations, mounting flange standards, seal materials, fluid compatibility details, weight, noise levels, and current lead times are not publicly documented. The 5 °C service temperature is listed without an upper temperature bound, and certifications, warranty terms, distributor network details, and company size data are also not publicly documented.

Editorial summary

Casappa S.p.A. is documented as an Italy-based manufacturer located in Lemignano di Collecchio with a hydraulic motor category entry. The published gear-pump-and-motor product routes include the XLP and Polaris families, with aluminum-body PL and cast-iron-body PH routes within those families. Cast iron is documented as a material in the hydraulic motor context. The information presented is limited to the documented category and product family references and should not be treated as a complete catalogue.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S9]
  • Certifications [S9]
  • Availability or stock [S9]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate identity and official Italy headquarters data are retained from Casappa pages. Gear-motor and XHP20 hydraulic-pump evidence is retained from official product materials. Revenue, certifications, availability and delivery claims were not asserted. [S9]Company-stated

Frequently asked questions

What Hydraulic Motor product is documented for Casappa S.p.A.?

The retained product material names Gear-pump-and-motor product routes, including XLP and Polaris families with aluminum-body PL and cast-iron-body PH routes. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S9]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.