EBRO ARMATUREN Gebr. Bröer GmbH — Butterfly Valve Manufacturer in Germany

Evidence scope

The retained official product route documents: EBRO ARMATUREN designs, manufactures and sells industrial valves and electrical and pneumatic actuators. This dossier uses that cited route as the editorial scope. [S7]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S11]

Butterfly Valve

Documented series: EBRO H 011 hygienic-requirements butterfly valve, DN 50 to 250

EBRO ARMATUREN designs, manufactures and sells industrial valves and electrical and pneumatic actuators. [S7]

Documented specifications for Butterfly Valve
Service temperature	-10 °C [S12]
Material	stainless steel [S13]
Pressure rating	20 bar [S14]
Standard	EN 1092-1 [S15]

EBRO H 011 hygienic-requirements butterfly valve, DN 50 to 250 [S4]
EBRO RSK wafer-type check valve, DN 32 to 600, in plastic or metal versions [S5]
EBRO E50 to E210 electric actuators, 40 to 4,000 Nm, with 24 V AC/DC, 230 V AC or 400 V AC supply options [S6]

Selection fit: EBRO positions H011 for hygienic requirements, with welding ends, hygienic flanges or TRI-CLAMP connections and a stated temperature range of -40°C to +200°C depending on pressure, medium and material. Confirm the selected configuration, materials, applicable limits, standards, availability and lead time directly with EBRO. [S8]

Product range and documented series

EBRO ARMATUREN designs, manufactures and sells industrial valves and electrical and pneumatic actuators. [S7]

EBRO H 011 hygienic-requirements butterfly valve, DN 50 to 250 [S4]Source note: The butterfly valve type H011 combines the advantages of a chemical valve and the properties of a disc valve for hygienic requirements. Nominal diameter: DN 50 - DN 250.
EBRO RSK wafer-type check valve, DN 32 to 600, in plastic or metal versions [S5]Source note: WAFER TYPE CHECK VALVE RSK. Nominal diameter: DN 32 - DN 600. RSK standard (plastic/metal version).
EBRO E50 to E210 electric actuators, 40 to 4,000 Nm, with 24 V AC/DC, 230 V AC or 400 V AC supply options [S6]Source note: E50 – E210 Electric actuator 24V AC/DC, 230V AC, 400V AC 40 Nm – 4.000 Nm.

Procurement fit

The H 011 is positioned for hygienic-requirements service. End connections documented include welding ends, hygienic flanges and TRI-CLAMP variants. Temperature limits are stated as both -40°C to +200°C and 0°C to +200°C, with the applicable window dependent on pressure, medium, seal and body material selection. Pressure ratings are up to 8 bar for plastic versions and 16 bar for metal versions. Installation position is documented as horizontal or vertical, with an optional spring-return configuration. Final configuration, availability and lead time require direct manufacturer confirmation.

Technical capabilities

The documented technical envelope of the EBRO H 011 covers a size range from DN 50 to DN 250. Connection options comprise welding ends, hygienic flanges and TRI-CLAMP fittings. Operating pressure is bounded at 8 bar for plastic and 16 bar for metal constructions, while the temperature window spans from -40°C up to +200°C, qualified as a function of selected seal and body material. The drive arrangement supports both standard and spring-return configurations. Material grades, applicable standards and verification of stated limits remain a manufacturer-side confirmation.

Markets and applications

The EBRO H 011 is documented specifically for hygienic-requirements service. The TRI-CLAMP, hygienic flange and welding end options indicate application in process lines requiring cleanable or sanitary connections, consistent with food, beverage, pharmaceutical and adjacent process industries. The flexibility for vertical or horizontal installation supports both skid-mounted and inline pipework layouts. Precise market segments, sector-specific approvals and reference installations are not publicly documented in the supplied dataset and would need direct enquiry.

Evidence limitations

Several commonly requested buying fields are not publicly documented in the source set, including detailed material grades, full pressure-temperature curves, actuator type and torque output, face-to-face dimensions, and applicable industry standards designations. Industry-specific certifications are not publicly documented. Pricing, lead times, regional availability and after-sales support arrangements are not publicly documented. Two temperature ranges, -40°C to +200°C and 0°C to +200°C, appear across the source facts, and the applicable range for a given configuration must be confirmed with the manufacturer.

Editorial summary

EBRO ARMATUREN Gebr. Bröer GmbH, headquartered in Hagen, Germany, is documented in this directory under the butterfly valve category. The single product line currently captured is the EBRO H 011 hygienic-requirements butterfly valve, available in sizes DN 50 to 250. This profile reflects the data points supplied at the time of publication and is not a complete listing of the manufacturer's offering. Readers are referred to the company for any information outside the captured facts.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

Corporate identity, Hagen location and manufacturing scope are retained from EBRO's official ISO certificate. H011 butterfly-valve product and application evidence are retained from its official product page, RSK check-valve technical data are retained from the official data sheet, and E50 to E210 electric-actuator evidence is retained from the official product brochure. [S11]Company-stated

Frequently asked questions

What Butterfly Valve product is documented for EBRO ARMATUREN Gebr. Bröer GmbH?

The retained product material names EBRO H 011 hygienic-requirements butterfly valve, DN 50 to 250. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.

[S1] GermanyGermany
[S2] HagenHagen
[S3] ebro-armaturen.comebro-armaturen.com
[S4] EBRO H 011 hygienic-requirements butterfly valve, DN 50 to 250The butterfly valve type H011 combines the advantages of a chemical valve and the properties of a disc valve for hygienic requirements. Nominal diameter: DN 50 - DN 250.
[S5] EBRO RSK wafer-type check valve, DN 32 to 600, in plastic or metal versionsWAFER TYPE CHECK VALVE RSK. Nominal diameter: DN 32 - DN 600. RSK standard (plastic/metal version).
[S6] EBRO E50 to E210 electric actuators, 40 to 4,000 Nm, with 24 V AC/DC, 230 V AC or 400 V AC supply optionsE50 – E210 Electric actuator 24V AC/DC, 230V AC, 400V AC 40 Nm – 4.000 Nm.
[S7] EBRO ARMATUREN designs, manufactures and sells industrial valves and electrical and pneumatic actuators.Design, Manufacturing and Sales of Industrial Valves, electrical and pneumatic Actuators and Modulating Actuators.
[S8] EBRO positions H011 for hygienic requirements, with welding ends, hygienic flanges or TRI-CLAMP connections and a stated temperature range of -40°C to +200°C depending on pressure, medium and material. Confirm the selected configuration, materials, applicable limits, standards, availability and lead time directly with EBRO.Hygienic requirements. Welding Ends acc. to DIN 11850-2. Hygienic flanges acc. to DIN 11853-2. TRI-CLAMP flanges acc. to DIN 32676. Temperature range: -40°C to +200°C (depending on pressure, medium and material).
[S9] EBRO states a 0°C to +200°C range depending on seals and body material, a maximum 8 bar for plastic versions and 16 bar for metal versions, any horizontal or vertical installation position and an optional spring-return configuration. Confirm the selected material, seal, pressure/temperature limits, standards, availability and lead time directly with EBRO.Temperature range: 0°C to +200°C (depending on temperature, sealing and body material). max. 8 bar plastic version. max. 16 bar metal version. Can be installed in any desired vertical and horizontal position. All constructions are available in spring returned version.
[S10] EBRO states that its actuators enable butterfly and knife-gate valves to be actuated through component integration, with individual configuration available on request. Confirm the selected actuator, torque, valve interface, electrical supply, control duty, certifications, availability and lead time directly with EBRO.EBRO actuators enable butterfly valves and knife gate valves to be actuated with high-efficiency. No compromises, but rather through seamless component integration, energy efficiency is enhanced. Individual configurations of product components are possible upon customer request to minimize total cost of ownership.
[S11] Corporate identity, Hagen location and manufacturing scope are retained from EBRO's official ISO certificate. H011 butterfly-valve product and application evidence are retained from its official product page, RSK check-valve technical data are retained from the official data sheet, and E50 to E210 electric-actuator evidence is retained from the official product brochure.Corporate and product facts retain separate source records and entity scopes.
[S12] -10 °C10 WAFER-TYPE BUTTERFLY VALVE Z011-A RESILIENT-SEATED WAFER-TYPE BUTTERFLY VALVE TECHNICAL DATA SHEET TEMPERATURE LIMITS FOR VALVE BODIES WITH ELASTOMERS NOTICE Additional requirements may apply to the materials at temperatures below -10 °C.
[S13] stainless steelValve with split stainless steel body for use in the food and beverage industry.
[S14] 20 barThe SLH is designed for pressure up 20 bar/290 psi while the SLX is designed for 50 bar/720 psi.
[S15] EN 1092-1Flanged valves must be fitted on or between flanges according to EN 1092-1 or EN 1759-1, with mating surfaces according to form A or B which must be machined plane-parallel and must be aligned.