Needle Valve manufacturer profile

High Pressure Equipment Company

High Pressure Equipment Company is a needle valve manufacturer based in Erie, United States. [S2][S1]

Country
United States [S1]
City
Erie [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Published pressure family
The cited Taper Seal line covers 10,000 and 15,000 psi service. [S4]
Construction and tubing
The cited route lists nonrotating-stem designs, 316 stainless-steel bodies, 17-4PH stems and 1/16 through 3/8 in OD compression tubing sizes. [S5]
Taper Needle
Official product image [S11]

Evidence scope

The retained official product route documents: High Pressure Equipment Company documents Taper Seal needle valves for high-pressure tubing systems. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Needle Valve

Documented series: High Pressure Equipment Company Taper Seal needle valves.

High Pressure Equipment Company documents Taper Seal needle valves for high-pressure tubing systems. [S6]

Documented specifications for Needle Valve
Pressure rating150,000 psi [S9]
Materialstainless steel [S10]
Published pressure family
The cited Taper Seal line covers 10,000 and 15,000 psi service. [S4]
Construction and tubing
The cited route lists nonrotating-stem designs, 316 stainless-steel bodies, 17-4PH stems and 1/16 through 3/8 in OD compression tubing sizes. [S5]
  • High Pressure Equipment Company Taper Seal needle valves. [S6]

Selection fit: Start with Taper Seal needle valves when the cited pressure family, nonrotating-stem design and compression-tubing sizes suit the system. Confirm selected pressure, material, tubing and final configuration with High Pressure Equipment Company. [S7]

Product range and documented series

High Pressure Equipment Company documents Taper Seal needle valves for high-pressure tubing systems. [S6]

  • High Pressure Equipment Company Taper Seal needle valves. [S6]Source note: Taper Seal Needle Valves

Procurement fit

Start with High Pressure Equipment Company Taper Seal needle valves when the cited pressure family, nonrotating-stem design and compression-tubing sizes suit the system under review. Confirm the selected pressure class, body and stem materials, tubing size and final configuration with High Pressure Equipment Company before release. That is the extent of the published guidance for this category.

Technical capabilities

The cited Taper Seal needle valve line is published for 10,000 and 15,000 psi service. Documented construction includes nonrotating-stem designs, 316 stainless-steel bodies and 17-4PH stems. Compression tubing sizes are listed from 1/16 through 3/8 in OD. The cited documentation does not list additional pressure classes, alternate body materials, port types or end connections within the needle valve entry.

Markets and applications

The cited documentation does not specify target markets or named applications for the High Pressure Equipment Company Taper Seal needle valve line. End use is left to the specifying engineer based on the published pressure, material and tubing range. Buyers should confirm application suitability directly with the manufacturer, since no industry segment or reference installation is publicly documented here.

Evidence limitations

Several common procurement fields are not publicly documented for this entry. Specific test certificates, material trace reports, country of origin markings beyond United States, lead time, authorised distributor list, model-level part numbers, cycle life ratings, temperature limits and third party certifications are not publicly documented. Buyers should request these items directly from High Pressure Equipment Company.

Editorial summary

High Pressure Equipment Company, based in Erie, United States, is documented in this directory under the needle valve category. The cited offering is the Taper Seal needle valve line from this manufacturer. Scope is limited to what is publicly documented, so product families beyond Taper Seal needle valves are not asserted in this entry. Detail in the following fields is drawn from the cited documentation only.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Certifications [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • High Pressure Equipment Company buyer-facing identity and Erie location are retained from its official company page. Taper Seal construction, pressure family, tubing context and page-bound product image are scoped only to that cited route. Revenue, certification, stock, delivery and service claims were not asserted. [S8]Company-stated

Frequently asked questions

What Needle Valve product is documented for High Pressure Equipment Company?

The retained product material names High Pressure Equipment Company Taper Seal needle valves. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published pressure family should a buyer compare?

The cited product material records: The cited Taper Seal line covers 10,000 and 15,000 psi service. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published construction and tubing should a buyer compare?

The cited product material records: The cited route lists nonrotating-stem designs, 316 stainless-steel bodies, 17-4PH stems and 1/16 through 3/8 in OD compression tubing sizes. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.