Ball Bearing manufacturer profile

IKO

IKO is a ball bearing manufacturer based in Japan. [S1]

Country
Japan [S1]
Website
ikont.com

Evidence scope

The retained official product route documents: At IKO, we design and manufacture linear guides, needle roller bearings and positioning stages to meet your highest quality and performance standards. This dossier uses that cited route as the editorial scope. [S5]

Ball Bearing

At IKO, we design and manufacture linear guides, needle roller bearings and positioning stages to meet your highest quality and performance standards. [S5]

Documented specifications for Ball Bearing
Maximum dynamic load2,210 kN [S3]
Dynamic load ratingin excess of 9,000 N [S4]

Product range and documented series

At IKO, we design and manufacture linear guides, needle roller bearings and positioning stages to meet your highest quality and performance standards. [S5]

  • Maximum dynamic load: 2,210 kN [S3]Evidence scope: Maximum dynamic loadSource note: Max dynamic load • 2,210 kN
  • Dynamic load rating: in excess of 9,000 N [S4]Evidence scope: Dynamic load ratingSource note: Consider the MLF42 model, which boasts a dynamic load rating in excess of 9,000 N and a moment load rating over 320 N • m (MLFG42) in the roll axis.

Documented specifications

Maximum dynamic load2,210 kN [S3]
Dynamic load ratingin excess of 9,000 N [S4]

Procurement fit

IKO is documented to fit applications involving a maximum dynamic load of 2,210 kN. It also supports roll-axis uses where a dynamic load rating in excess of 9,000 N is required, such as the MLF42 model, which has a moment load rating over 320 N • m (MLFG42).

Technical capabilities

IKO documents a maximum dynamic load of 2,210 kN. Its specification coverage includes the MLF42 model, which has a dynamic load rating in excess of 9,000 N and a moment load rating over 320 N • m (MLFG42) in the roll axis.

Markets and applications

IKO’s documented products point to applications requiring substantial load-handling capability, including a maximum dynamic load of 2,210 kN. For the MLF42 model, IKO identifies a dynamic load rating in excess of 9,000 N and a moment load rating over 320 N • m (MLFG42) in the roll axis, indicating suitability for applications involving dynamic and rotational loading requirements.

Evidence limitations

The documented facts do not establish that IKO offers the highest capacity, that any single IKO model has a maximum dynamic load of 2,210 kN, or that a model with a dynamic load rating in excess of 9,000 N also has a moment load rating over 320 N • m. They also do not establish the identity of the MLFG42 model or its compatibility with the MLF42 model.

Editorial summary

IKO offers products with a maximum dynamic load of 2,210 kN. For applications requiring a lower load capacity, the MLF42 model provides a dynamic load rating in excess of 9,000 N and a moment load rating over 320 N • m (MLFG42) in the roll axis.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Frequently asked questions

What Ball Bearing product is documented for IKO?

The retained product material names Maximum dynamic load: 2,210 kN. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S3]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.