Hydraulic Accumulator manufacturer profile

NACOL CO., LTD.

NACOL CO., LTD. is a hydraulic accumulator manufacturer based in Shimizu, Japan. [S2][S1]

Country
Japan [S1]
City
Shimizu [S2]

Evidence scope

The retained official product route documents: NACOL publishes an accumulator product area with product information, technical information, manuals and an accumulator sizing calculator. This dossier uses that cited route as the editorial scope. [S5]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S7]

Accumulator

Documented series: Small carbon-steel/aluminium accumulators from 0.03 to 5 L, medium and large carbon-steel ranges, stainless-steel accumulators from 0.1 to 160 L, and piston accumulators from 0.4 to 100 L

NACOL publishes an accumulator product area with product information, technical information, manuals and an accumulator sizing calculator. [S5]

Documented specifications for Accumulator
Pressure rating50MPa [S8]
  • Small carbon-steel/aluminium accumulators from 0.03 to 5 L, medium and large carbon-steel ranges, stainless-steel accumulators from 0.1 to 160 L, and piston accumulators from 0.4 to 100 L [S4]

Selection fit: NACOL's product area provides technical information, regulatory material, manuals and a sizing calculator. Use the documented line-up to shortlist volume, material and piston requirements, then verify the selected product and applicable regulation directly with NACOL. [S6]

Product range and documented series

NACOL publishes an accumulator product area with product information, technical information, manuals and an accumulator sizing calculator. [S5]

  • Small carbon-steel/aluminium accumulators from 0.03 to 5 L, medium and large carbon-steel ranges, stainless-steel accumulators from 0.1 to 160 L, and piston accumulators from 0.4 to 100 L [S4]Source note: Aluminum/Carbon Steel Small Size 0.03～5L; Stainless Steel 0.1～160L; Piston Type 0.4～100L

Procurement fit

Procurement activity should begin with NACOL's product area, which provides technical information, regulatory material, manuals and a sizing calculator. The documented line-up allows shortlisting by volume, material and piston requirements before supplier contact. Engineers are directed to verify the selected product and applicable regulation directly with NACOL, since binding regulatory confirmation rests with the manufacturer. Lead time, pricing tiers, authorised distribution channels and minimum order quantities are not publicly documented and must be confirmed through direct enquiry.

Technical capabilities

The documented accumulator ranges are organised by construction and volume. Small carbon-steel and aluminium units span 0.03 to 5 L. Medium and large carbon-steel ranges are listed without specific volume bounds. Stainless-steel accumulators cover 0.1 to 160 L, and piston accumulators span 0.4 to 100 L. Stainless steel is the documented material designation. Specific pressure ratings, port sizes, pre-charge values and compliance standards are not publicly documented within the supplied evidence.

Markets and applications

The documented scope covers hydraulic accumulators in carbon-steel, aluminium, stainless-steel and piston constructions. Applications consistent with these constructions include energy storage, pulsation dampening and emergency power functions in industrial hydraulic circuits. The stainless-steel line spans 0.1 to 160 L and the piston line spans 0.4 to 100 L. The small carbon-steel and aluminium range from 0.03 to 5 L addresses lower-volume circuits. End-use industries, reference installations and customer references are not publicly documented.

Evidence limitations

Pressure ratings, port connections, pre-charge pressures, temperature limits, certifications, lead times, pricing, authorised distributor lists and minimum order quantities are not publicly documented. The medium and large carbon-steel ranges are listed without explicit volume bounds, so lower and upper limits must be confirmed with NACOL. Company history, employee count, annual revenue, quality accreditations and named reference installations are also not publicly documented. Recent commercial signals matched none of the available indicators within the supplied evidence set.

Editorial summary

NACOL CO., LTD. is a Japan-based manufacturer located in Shimizu with a documented product line in hydraulic accumulators. The catalogue covers small carbon-steel and aluminium units from 0.03 to 5 L, medium and large carbon-steel ranges, stainless-steel accumulators from 0.1 to 160 L, and piston accumulators from 0.4 to 100 L. The stainless-steel material designation is documented. No further corporate history, founding date or production scale is listed in the available evidence.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • NACOL identity and Shimizu address are retained from the official company profile. Product range, technical-resource and sizing evidence is retained from the official accumulator pages. Revenue, certifications and lead time were not asserted. [S7]Company-stated

Frequently asked questions

What Hydraulic Accumulator product is documented for NACOL CO., LTD.?

The retained product material names Small carbon-steel/aluminium accumulators from 0.03 to 5 L, medium and large carbon-steel ranges, stainless-steel accumulators from 0.1 to 160 L, and piston accumulators from 0.4 to 100 L. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S7]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.