Stepper Drive manufacturer profile

Advanced Micro Controls, Inc.

Advanced Micro Controls, Inc. is a stepper drive manufacturer based in Terryville, United States. [S2][S1]

Country
United States [S1]
City
Terryville [S2]
Website
amci.com

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Industrial networks
The unit supports EtherNet/IP, Modbus TCP and PROFINET. [S4]
Supply and resolution
It operates from 24–48 V DC, supplies 0.1–4.0 A RMS and supports 200–32,767 steps per revolution. [S5]
AMCI SD4840E2 Ethernet integrated stepper drive
Official product image [S6]

Evidence scope

The retained official product route documents: AMCI documents SD4840E2 as an integrated indexer and bipolar stepper drive. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Stepper Drive

Documented series: AMCI SD4840E2 Ethernet integrated stepper drive

AMCI documents SD4840E2 as an integrated indexer and bipolar stepper drive. [S6]

Documented specifications for Stepper Drive
Service temperature85°C [S9]
Ingress protectionIP67 [S10]
Industrial networks
The unit supports EtherNet/IP, Modbus TCP and PROFINET. [S4]
Supply and resolution
It operates from 24–48 V DC, supplies 0.1–4.0 A RMS and supports 200–32,767 steps per revolution. [S5]
  • AMCI SD4840E2 Ethernet integrated stepper drive [S6]

Selection fit: Network, motor current, resolution, I/O and application integration remain exact-model decisions. [S7]

Product range and documented series

AMCI documents SD4840E2 as an integrated indexer and bipolar stepper drive. [S6]

  • AMCI SD4840E2 Ethernet integrated stepper drive [S6]Source note: AMCI SD4840E2 Ethernet integrated stepper drive

Procurement fit

The AMCI SD4840E2 is positioned as an Ethernet integrated stepper drive, with selection criteria stated to be exact-model decisions. Specifically, network protocol, motor current, resolution, I/O configuration, and application integration remain exact-model decisions rather than scalable options within the published line. Specifiers must verify that the documented 24–48 V DC supply, 0.1–4.0 A RMS current range, and EtherNet/IP, Modbus TCP, or PROFINET support match the target machine architecture before release. Inventory configuration follows the single model designation and should be ordered against the exact part string.

Technical capabilities

The AMCI SD4840E2 operates from a 24–48 V DC supply and delivers 0.1–4.0 A RMS to the connected stepper motor. Step resolution is programmable from 200 to 32,767 steps per revolution, covering standard full-step settings through high-resolution microstepping. Service temperature is rated at 50°C, defining the upper ambient limit for installation. Industrial network support includes EtherNet/IP, Modbus TCP, and PROFINET, allowing integration into common PLC and controller architectures. The product is documented as an integrated drive, combining the network interface and power stage in a single unit.

Markets and applications

Application context for the AMCI SD4840E2 is not explicitly defined in the documented category entry beyond its function as a network-connected stepper drive. The combination of EtherNet/IP, Modbus TCP, and PROFINET support indicates suitability for factory automation environments using mainstream PLC platforms. The 0.1–4.0 A RMS current range and 200–32,767 steps per revolution resolution suit positioning, indexing, and light-duty motion tasks. Specific market verticals, end-user references, and application case studies are not publicly documented within the available specification record.

Evidence limitations

The specification record is limited to a single model designation, the AMCI SD4840E2, and one product category. Company history, founding date, manufacturing scale, employee count, and annual revenue are not publicly documented in the available facts. Customer references, installed base figures, and end-user examples are not publicly documented. Certifications such as CE, UL, or agency listings, as well as compliance marks, are not publicly documented. The 50°C service temperature is given without an accompanying minimum rating, and detailed derating curves, mechanical drawings, I/O counts, and firmware revision history are not publicly documented within this record.

Editorial summary

Advanced Micro Controls, Inc., based in Terryville, United States, is documented in this directory under the stepper drive category. The catalog entry currently lists a single integrated stepper drive, the AMCI SD4840E2 Ethernet integrated stepper drive. Published specifications address service temperature, supported industrial networks, electrical supply, motor current range, and step resolution. The manufacturer profile is therefore narrowly scoped to one product line and one model designation, with that model serving as the principal reference point for engineers evaluating networked motion control hardware within the directory scope.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to AMCI SD4840E2 Ethernet integrated stepper drive; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S8]Company-stated

Frequently asked questions

What Stepper Drive product is documented for Advanced Micro Controls, Inc.?

The retained product material names AMCI SD4840E2 Ethernet integrated stepper drive. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published industrial networks should a buyer compare?

The cited product material records: The unit supports EtherNet/IP, Modbus TCP and PROFINET. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published supply and resolution should a buyer compare?

The cited product material records: It operates from 24–48 V DC, supplies 0.1–4.0 A RMS and supports 200–32,767 steps per revolution. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.