Pinch Valve manufacturer profile

AKO Armaturen & Separationstechnik GmbH

AKO Armaturen & Separationstechnik GmbH is a pinch valve manufacturer based in Trebur-Astheim, Germany. [S2][S1]

Country
Germany [S1]
City
Trebur-Astheim [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Operating principle
The cited range operates without an external pneumatic control mechanism by direct pressurization using compressed air, neutral gases or fluid. [S4]
Published options
The cited range covers DN 10 to DN 300 and lists multiple connection forms and sleeve qualities. [S5]
Air Operated Pinch Valves
Official product image [S6]

Evidence scope

The retained official product route documents: AKO documents air-operated pinch valves that directly pressurise the sleeve with air, neutral gas or fluid. This dossier uses that cited route as the editorial scope. [S7]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S9]

Pinch Valve

Documented series: AKO air-operated pinch valves.

AKO documents air-operated pinch valves that directly pressurise the sleeve with air, neutral gas or fluid. [S7]

Documented specifications for Pinch Valve
MaterialAluminium [S10]
StandardDIN EN 1092 [S11]
Pressure rating3.00 bar [S12]
Service temperature-10.00 ° C [S13]
Operating principle
The cited range operates without an external pneumatic control mechanism by direct pressurization using compressed air, neutral gases or fluid. [S4]
Published options
The cited range covers DN 10 to DN 300 and lists multiple connection forms and sleeve qualities. [S5]
  • AKO air-operated pinch valves. [S6]

Selection fit: Start with an AKO air-operated pinch valve when direct sleeve pressurization, the cited DN 10 to DN 300 range and the required connection/sleeve options fit the duty. Confirm medium and final configuration with AKO. [S8]

Product range and documented series

AKO documents air-operated pinch valves that directly pressurise the sleeve with air, neutral gas or fluid. [S7]

  • AKO air-operated pinch valves. [S6]Source note: Air Operated Pinch Valves

Procurement fit

Selection of an AKO air-operated pinch valve is appropriate when the duty requires direct sleeve pressurization using compressed air, neutral gases or fluid, and the line size falls within the published DN 10 to DN 300 range. The listed connection forms and sleeve qualities allow matching to common piping interfaces. Final configuration, medium compatibility and pressure rating must be confirmed with AKO before release, as the cited documentation is limited to the published options.

Technical capabilities

The cited AKO range operates without an external pneumatic control mechanism. Sleeve pressurization is performed directly using compressed air, neutral gases or fluid supplied to the valve body. Published sizes span DN 10 to DN 300. Multiple connection forms and sleeve qualities are listed for specification. Pressure class, temperature limit, actuation response time and material grades beyond the listed sleeve qualities are not documented in the cited material and must be obtained from AKO.

Markets and applications

The documented AKO air-operated pinch valve range is applicable to general industrial pinch valve duties, with DN 10 to DN 300 covering small-bore through mid-process line dimensions. Direct sleeve pressurization using compressed air, neutral gases or fluid suits services where a simple supply is available and a separate pneumatic actuator is not required. Reference installations, end markets and approvals are not documented in the cited material.

Evidence limitations

Model codes beyond the general AKO air-operated pinch valve designation are not publicly documented. Pressure ratings, temperature limits, cycle life figures, certification status and material grades beyond the listed sleeve qualities are not publicly documented. Confirmed end-market applications and reference installations are not publicly documented. The facility address is given as Trebur-Astheim, Germany, with no further corporate structure, ownership or capacity data provided in the cited material.

Editorial summary

AKO Armaturen & Separationstechnik GmbH is documented in the pinch valve category, with the manufacturer based in Trebur-Astheim, Germany. The published range comprises AKO air-operated pinch valves defined by direct sleeve pressurization rather than a separate pneumatic actuator. The catalogue entry covers sizes from DN 10 to DN 300 and lists multiple connection forms and sleeve qualities. No further corporate or product information beyond the documented pinch valve range is available in the cited material.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S9]
  • Certifications [S9]
  • Availability or stock [S9]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • AKO identity and Trebur-Astheim location are retained from its official company page. Air-operated pinch-valve mechanism, range, options and page-bound image are scoped only to the cited route. Revenue, certification, stock, delivery and service claims were not asserted. [S9]Company-stated

Frequently asked questions

What Pinch Valve product is documented for AKO Armaturen & Separationstechnik GmbH?

The retained product material names AKO air-operated pinch valves. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published operating principle should a buyer compare?

The cited product material records: The cited range operates without an external pneumatic control mechanism by direct pressurization using compressed air, neutral gases or fluid. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published options should a buyer compare?

The cited product material records: The cited range covers DN 10 to DN 300 and lists multiple connection forms and sleeve qualities. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S9]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.