Solenoid Coils manufacturer profile

ATAM S.p.A.

ATAM S.p.A. is a solenoid coils manufacturer based in Agrate Brianza, Italy. [S2][S1]

Country
Italy [S1]
City
Agrate Brianza [S2]
Website
atam.it

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Published diameter options
The cited 22 mm coil route lists 8, 9, 9.8 and 10 mm available pipe diameters. [S4]
Published families
The cited route names coil families 231, 288, 246, 278, 301, 394 and 401. [S5]
22mm Coils
Official product image [S6]

Evidence scope

The retained official product route documents: ATAM documents a 22 mm solenoid-coil family. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Solenoid Coil

Documented series: ATAM 22 mm solenoid-coil family.

ATAM documents a 22 mm solenoid-coil family. [S6]

Documented specifications for Solenoid Coil
Service temperature155°C [S9]
StandardEN60529 [S10]
Materialstainless steel [S11]
Published diameter options
The cited 22 mm coil route lists 8, 9, 9.8 and 10 mm available pipe diameters. [S4]
Published families
The cited route names coil families 231, 288, 246, 278, 301, 394 and 401. [S5]
  • ATAM 22 mm solenoid-coil family. [S6]

Selection fit: Use the cited 22 mm family only after matching the published diameter and exact coil family; confirm voltage, connector, valve interface, duty and final application with ATAM. [S7]

Product range and documented series

ATAM documents a 22 mm solenoid-coil family. [S6]

  • ATAM 22 mm solenoid-coil family. [S6]Source note: 22mm Coils

Procurement fit

Specify against the ATAM 22 mm solenoid-coil family only after confirming the exact pipe diameter and the precise coil family code, since the published range spans multiple bore sizes and series. Voltage, electrical connector, valve interface, duty cycle and end-use application must be confirmed directly with ATAM prior to release. The cited record does not enumerate stock configurations, lead times, MOQ or regional distribution channels.

Technical capabilities

The 22 mm solenoid-coil family is published with four pipe diameter options: 8, 9, 9.8 and 10 mm. Seven discrete coil series are listed by family code: 231, 288, 246, 278, 301, 394 and 401. The documented record does not state winding class, insulation rating, temperature class, IP rating, power consumption, voltage options, connector type, or pressure ratings for any of the listed families.

Markets and applications

The documented scope is limited to the ATAM 22 mm solenoid-coil family, which by form factor implies integration with pneumatically or hydraulically actuated valves. Specific end-use sectors, application case studies, named reference installations, and geographic deployment patterns are not publicly documented. Buyers evaluating the listed coil families should request application guidance from ATAM before committing to a series selection, as no vertical or industry fit has been disclosed in the cited record.

Evidence limitations

Several common buying fields are not publicly documented. These include voltage and power ratings, insulation and temperature class, IP rating, connector type and pinout, valve interface standard, duty cycle, pressure ratings, certification status, country of origin confirmation beyond Italy, company size, founding date, production capacity, distribution channels, lead times, MOQ, warranty terms, and any reference to specific customers or installed base. Pricing is also not publicly documented.

Editorial summary

ATAM S.p.A. is an Italian solenoid coil manufacturer based in Agrate Brianza. The documented product scope is the ATAM 22 mm solenoid-coil family, which is offered across a defined set of pipe diameters and discrete coil series. Published references identify the producer as the source for this single 22 mm form factor, with no additional product lines cited in the available record.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Production capacity [S8]
  • Certifications [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • ATAM company context is retained from its official site. Product facts and image are scoped only to the cited 22 mm coil family; revenue, certifications, capacity, stock, delivery and service claims are not asserted. [S8]Company-stated

Frequently asked questions

What Solenoid Coils product is documented for ATAM S.p.A.?

The retained product material names ATAM 22 mm solenoid-coil family. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published diameter options should a buyer compare?

The cited product material records: The cited 22 mm coil route lists 8, 9, 9.8 and 10 mm available pipe diameters. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published families should a buyer compare?

The cited product material records: The cited route names coil families 231, 288, 246, 278, 301, 394 and 401. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Production capacity, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.