Cable Tray manufacturer profile

BAKS Kazimierz Sielski

BAKS Kazimierz Sielski is a cable tray manufacturer based in Karczew, Poland. [S2][S1]

Country
Poland [S1]
City
Karczew [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Sheet thickness
3.0 mm sheet thickness. [S4]
Support spacing
Product record states support spacing up to 8 m. [S5]
BAKS KSTH100N cable tray
Official product image [S10]

Evidence scope

The retained official product route documents: BAKS documents the KSTH100N cable tray for long support spacing. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Cable Tray

Documented series: KSTH100N cable tray.

BAKS documents the KSTH100N cable tray for long support spacing. [S6]

Documented specifications for Cable Tray
StandardIEC 61537 [S9]
Sheet thickness
3.0 mm sheet thickness. [S4]
Support spacing
Product record states support spacing up to 8 m. [S5]
  • KSTH100N cable tray. [S6]

Selection fit: Compare KSTH100N where its cited 3.0 mm sheet and support-spacing statement fit; confirm width, finish, load and installation conditions with BAKS. [S7]

Product range and documented series

BAKS documents the KSTH100N cable tray for long support spacing. [S6]

  • KSTH100N cable tray. [S6]Source note: KSTH100N cable tray.

Procurement fit

The KSTH100N cable tray is appropriate for evaluation where the project's support spacing requirements align with the documented 8 m figure and where the 3.0 mm sheet thickness satisfies the specified duty. The 8 m supply length is recorded as a single section dimension in the product record. Buyers should compare KSTH100N against alternative tray systems using the same parameters and then confirm width, finish, load, and installation conditions with BAKS before issuing a purchase order.

Technical capabilities

The KSTH100N is documented as a cable tray with a supply length of 8 m and a sheet thickness of 3.0 mm. The product record states support spacing up to 8 m, which represents the maximum permitted distance between supports under the manufacturer's published figure. No further dimensional, load, material grade, or finish parameters are listed in the documented record, so additional data cannot be inferred. Engineers specifying this product should request the missing parameters directly from BAKS for design verification.

Markets and applications

The KSTH100N is listed under the cable tray category, which places it within structured cable management for industrial or commercial wiring systems. The 3.0 mm sheet thickness and the 8 m support spacing figure define the design envelope recorded by the manufacturer. The documented record does not name a specific end-user industry, installation environment, or reference project, so the intended application setting should be confirmed with BAKS based on the specification in hand.

Evidence limitations

The documented record for BAKS Kazimierz Sielski is limited to the KSTH100N cable tray series with its 8 m supply length, 3.0 mm sheet thickness, and 8 m support spacing statement. The following common buying fields are not publicly documented: tray width, height, side-rail profile, material grade, surface finish, corrosion-protection class, load class, fire rating, compliance with standards, accessories range, and the full product range beyond the one series listed. The procurement-fit note explicitly requires confirmation of width, finish, load, and installation conditions with BAKS.

Editorial summary

BAKS Kazimierz Sielski is a Polish manufacturer based in Karczew, documented in this directory under the cable tray category. The single cataloged series is the KSTH100N cable tray, supplied in 8 m lengths and fabricated from 3.0 mm sheet. The product record states support spacing up to 8 m. This profile is a factual reference compiled from the manufacturer's documented record and covers only the items listed therein, with no inference drawn from external sources.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Production capacity [S8]
  • Certifications [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate identity and location are retained from the cited official entity page. Product facts and the visual are limited to KSTH100N cable tray. No revenue, capacity, availability, certification or broader product-line claim is asserted. [S8]Company-stated

Frequently asked questions

What Cable Tray product is documented for BAKS Kazimierz Sielski?

The retained product material names KSTH100N cable tray. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published sheet thickness should a buyer compare?

The cited product material records: 3.0 mm sheet thickness. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published support spacing should a buyer compare?

The cited product material records: Product record states support spacing up to 8 m. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Production capacity, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.