Cable Drag Chain manufacturer profile

Brevetti Stendalto S.p.A.

Brevetti Stendalto S.p.A. is a cable drag chain manufacturer based in Monza, Italy. [S2][S1]

Country
Italy [S1]
City
Monza [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Application context
Dynamic cable and hose protection for horizontal/vertical movement, long travel and robotics. [S4]
Type 200 size point
12 mm inner height; 18–41 mm outer width; 18–40 mm bend radius. [S5]
Type 200 cable chain
Official product image [S12]

Evidence scope

The retained official product route documents: Brevetti Stendalto documents nylon cable chains for dynamic protection of cables and hoses. This dossier uses that cited route as the editorial scope. [S7]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S9]

Cable Drag Chain

Documented series: Nylon cable chains, including the cited Type 200 entry.

Brevetti Stendalto documents nylon cable chains for dynamic protection of cables and hoses. [S7]

Documented specifications for Cable Drag Chain
Supply length2m [S10]
Service temperature-25°C [S11]
Application context
Dynamic cable and hose protection for horizontal/vertical movement, long travel and robotics. [S4]
Type 200 size point
12 mm inner height; 18–41 mm outer width; 18–40 mm bend radius. [S5]
  • Nylon cable chains, including the cited Type 200 entry. [S6]

Selection fit: Compare the cited nylon chain range for dynamic cable and hose protection, including horizontal, vertical, long-travel or robotics contexts, then confirm the selected Type 200 geometry with Brevetti Stendalto. [S8]

Product range and documented series

Brevetti Stendalto documents nylon cable chains for dynamic protection of cables and hoses. [S7]

  • Nylon cable chains, including the cited Type 200 entry. [S6]Source note: nylon cable chains; Type 200

Procurement fit

Selection should consider the cited nylon chain range for dynamic cable and hose protection, including horizontal, vertical, long-travel, or robotics contexts. The specified supply length is 400 m, which should be checked against the required run length and packaging format. Confirm the selected Type 200 geometry directly with Brevetti Stendalto before release, as series variants beyond Type 200 are not enumerated in the available record.

Technical capabilities

The cable drag chain category is documented as nylon cable chains, with Type 200 cited as the reference series. Stated geometry for Type 200 is 12 mm inner height, 18–41 mm outer width, and 18–40 mm bend radius. Application context is dynamic cable and hose protection for horizontal and vertical movement, long travel, and robotics. No further dimensional or material data is recorded for the range.

Markets and applications

Documented applications include dynamic cable and hose protection across horizontal and vertical movement, long-travel installations, and robotics. The product scope is limited to nylon cable chains, with Type 200 cited as the reference series. No specific end markets, industry segments, or customer references are listed in the available record, so the application context is restricted to the motion and protection use cases stated.

Evidence limitations

Series nomenclature beyond the cited Type 200 entry is not publicly documented. Detailed material specifications, load ratings, temperature range, fire classification, and cycle life data are not publicly documented. Certifications, compliance marks, and warranty terms are not publicly documented. Customer references, installed base, and lead time information are not publicly documented.

Editorial summary

Brevetti Stendalto S.p.A. is documented under the cable drag chain category with nylon cable chains, citing Type 200 as a reference series. Operations are recorded in Monza, Italy. The available record covers a single product family, noting the cited Type 200 size point and a stated supply length, with no further series enumeration provided in the documentation.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Brevetti Stendalto corporate context is retained from its official contacts. Nylon-chain facts and visual are limited to the cited route; the separate Stendalto S.r.l. entity is not merged into this profile. [S9]Company-stated

Frequently asked questions

What Cable Drag Chain product is documented for Brevetti Stendalto S.p.A.?

The retained product material names Nylon cable chains, including the cited Type 200 entry. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published application context should a buyer compare?

The cited product material records: Dynamic cable and hose protection for horizontal/vertical movement, long travel and robotics. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published type 200 size point should a buyer compare?

The cited product material records: 12 mm inner height; 18–41 mm outer width; 18–40 mm bend radius. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.