Cable Gland manufacturer profile

CEMBRE S.p.A.

CEMBRE S.p.A. is a cable gland manufacturer based in Brescia, Italy. [S2][S1]

Country
Italy [S1]
City
Brescia [S2]
Website
cembre.com

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Construction
PA6.6 polyamide family with extended clamping range and IP68 protection. [S4]
Installation context
Extended thread for thicker sheet metal; page names EV chargers and wind turbines as examples. [S5]
MAXIBLOCK 1940 M
Official product image [S6]

Evidence scope

The retained official product route documents: CEMBRE documents MAXIBLOCK 1940 M as a polyamide cable-gland family. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Cable Gland

Documented series: MAXIBLOCK 1940 M polyamide cable-gland family.

CEMBRE documents MAXIBLOCK 1940 M as a polyamide cable-gland family. [S6]

Documented specifications for Cable Gland
StandardEN 62444 [S9]
Construction
PA6.6 polyamide family with extended clamping range and IP68 protection. [S4]
Installation context
Extended thread for thicker sheet metal; page names EV chargers and wind turbines as examples. [S5]
  • MAXIBLOCK 1940 M polyamide cable-gland family. [S6]

Selection fit: Compare MAXIBLOCK 1940 M where its cited polyamide construction, IP68 boundary, extended clamp range and thicker-sheet-metal thread context fit; confirm the final code with CEMBRE. [S7]

Product range and documented series

CEMBRE documents MAXIBLOCK 1940 M as a polyamide cable-gland family. [S6]

  • MAXIBLOCK 1940 M polyamide cable-gland family. [S6]Source note: MAXIBLOCK 1940 M

Procurement fit

For procurement evaluation, the MAXIBLOCK 1940 M should be considered where a polyamide PA6.6 cable gland rated to IP68 under EN 60423 is specified, in a RAL 9005 finish, and where the panel thickness justifies the documented extended thread for thicker sheet metal. The cited installation context names EV chargers and wind turbines as examples. The final ordering code, including thread size and clamp range variant, should be confirmed with CEMBRE before purchase order release.

Technical capabilities

The MAXIBLOCK 1940 M family is documented as PA6.6 polyamide construction with an extended clamping range. Ingress protection is recorded as IP68, and the series is referenced against EN 60423. The body colour is stated as RAL 9005. The thread geometry is described as extended to suit thicker sheet metal enclosures. Detailed numeric clamp range figures, specific thread dimensions, operating temperature limits, and torque values are not publicly documented in the supplied material and would require manufacturer confirmation.

Markets and applications

The documented installation context for the MAXIBLOCK 1940 M series explicitly names EV chargers and wind turbines as application examples, indicating reference positioning in electric mobility charging infrastructure and renewable energy equipment. Use in other industry sectors is not publicly documented in the supplied material. Selection for any specific market segment should be cross-checked against the manufacturer's current technical datasheet, as broader application coverage and sector-specific approvals are not stated in the available documentation.

Evidence limitations

The supplied documentation does not publicly disclose a company founding date, employee count, revenue, or other corporate metrics. Specific sub-codes within the MAXIBLOCK 1940 M family, complete clamp range tables, thread dimensions, operating temperature range, torque specifications, and any applicable certifications are not publicly documented in the material reviewed. Additional product lines beyond cable glands, distribution footprint, and standard lead times are also not publicly documented. Procurement decisions should rely on direct manufacturer datasheets rather than inferred values.

Editorial summary

CEMBRE S.p.A. is an Italy-based manufacturer located in Brescia, with a documented product line in cable glands. The catalog includes the MAXIBLOCK 1940 M polyamide cable-gland family, built around PA6.6 polyamide construction. The series is referenced against EN 60423 and provides IP68 ingress protection, with body colour stated as RAL 9005. Installation documentation describes an extended thread intended for thicker sheet metal panels, and the page names EV chargers and wind turbines as example application contexts.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Production capacity [S8]
  • Certifications [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • CEMBRE corporate context is retained from its locations page. MAXIBLOCK facts and the CDN-hosted visual are limited to the cited product family; no separate CDN entity, revenue, certification or capacity claim is asserted. [S8]Company-stated

Frequently asked questions

What Cable Gland product is documented for CEMBRE S.p.A.?

The retained product material names MAXIBLOCK 1940 M polyamide cable-gland family. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published construction should a buyer compare?

The cited product material records: PA6.6 polyamide family with extended clamping range and IP68 protection. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published installation context should a buyer compare?

The cited product material records: Extended thread for thicker sheet metal; page names EV chargers and wind turbines as examples. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Production capacity, Certifications. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.