Solenoid Valve manufacturer profile

CEME S.p.A.

CEME S.p.A. is a solenoid valve manufacturer based in Trivolzio, Italy. [S2][S1]

Country
Italy [S1]
City
Trivolzio [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Published port arrangement
Model 6660 is listed with G 1/4 inlet and outlet connections. [S4]
Published 6660 configuration
The cited 6660 route publishes an EPDM seal, 3.0 mm orifice and M.O.P.D. of 9 bar AC or 5 bar DC. [S5]
6660 product-image; page literal uses the same official host and path
Official product image [S9]

Evidence scope

The retained official product route documents: CEME documents model 6660 as a direct-acting 2/2-way normally closed solenoid valve. This dossier uses that cited route as the editorial scope. [S8]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S7]

Solenoid Valve

Documented specifications for Solenoid Valve
Published product factCEME Main Series 66 direct-acting normally closed solenoid valves. [S6]

Product range and documented series

CEME documents model 6660 as a direct-acting 2/2-way normally closed solenoid valve. [S8]

  • CEME Main Series 66 direct-acting normally closed solenoid valves. [S6]Source note: Main series 66
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • CEME corporate context comes from its official home page. The 6660 product page binds the same official image host and path with legacy HTTP markup; this dossier records the successfully retrieved HTTPS rendition and asserts no wider commercial claims. [S7]Company-stated

Frequently asked questions

What Solenoid Valve product is documented for CEME S.p.A.?

The retained product material names CEME Main Series 66 direct-acting normally closed solenoid valves. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published port arrangement should a buyer compare?

The cited product material records: Model 6660 is listed with G 1/4 inlet and outlet connections. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published 6660 configuration should a buyer compare?

The cited product material records: The cited 6660 route publishes an EPDM seal, 3.0 mm orifice and M.O.P.D. of 9 bar AC or 5 bar DC. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.