Cable Gland manufacturer profile

CMP Products Ltd

CMP Products Ltd is a cable gland manufacturer based in Newcastle upon Tyne, United Kingdom. [S2][S1]

Country
United Kingdom [S1]
City
Newcastle upon Tyne [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Cable type
Single-seal design for unarmoured and braid-armoured cables. [S4]
Environment
IP66/IP67/IP68 and a standard -60 to +130 °C temperature range. [S5]
A2 Industrial Cable Gland
Official product image [S6]

Evidence scope

The retained official product route documents: CMP documents A2 as a single-seal industrial cable-gland range. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Cable Gland

Documented series: A2 single-seal industrial cable glands.

CMP documents A2 as a single-seal industrial cable-gland range. [S6]

Documented specifications for Cable Gland
StandardIEC 62444 [S9]
Cable type
Single-seal design for unarmoured and braid-armoured cables. [S4]
Environment
IP66/IP67/IP68 and a standard -60 to +130 °C temperature range. [S5]
  • A2 single-seal industrial cable glands. [S6]

Selection fit: Compare A2 for the cited unarmoured or braid-armoured cable context and its documented IP/temperature boundary, then confirm gland size and application details with CMP. [S7]

Product range and documented series

CMP documents A2 as a single-seal industrial cable-gland range. [S6]

  • A2 single-seal industrial cable glands. [S6]Source note: A2 Industrial Cable Gland

Procurement fit

The A2 series is documented for unarmoured and braid-armoured cable terminations, with ingress protection to IP66, IP67 and IP68 ratings. The published temperature range of -60 to +130 °C defines the operating envelope buyers should verify against project specifications. Source material advises comparing the A2 to the cable type and IP/temperature boundary, then confirming gland size and application details directly with CMP. No distributor, lead time or pricing data is published.

Technical capabilities

The A2 cable gland is documented as a single-seal design suitable for unarmoured and braid-armoured cables. Mechanical impact resistance is referenced to IEC 62262. Environmental sealing is rated IP66, IP67 and IP68, and the operating temperature span is -60 to +130 °C. The product is categorised as an industrial cable gland. Thread forms, material grades, torque values, entry thread standards, and specific IK impact code are not included in the published facts.

Markets and applications

The A2 is documented for industrial cable termination where single-seal performance and ingress protection are required. The published cable type designation supports unarmoured and braid-armoured installations, and the -60 to +130 °C range addresses both cold-region and elevated-temperature process environments. End-market sectors, project references, and approved-industry listings are not publicly documented. Application suitability beyond the stated cable type and environmental boundary should be confirmed with the manufacturer.

Evidence limitations

Several specification fields commonly required for procurement evaluation are not publicly documented. These include thread standards and full size range, material composition, gasket type, torque settings, third-party certifications, hazardous area approvals, pricing, lead times, distributor network, minimum order quantities, and warranty terms. The IEC 62262 impact rating is referenced without a specific IK code. Buyers should request a complete datasheet directly from CMP for any of these parameters.

Editorial summary

CMP Products Ltd is a cable gland manufacturer based in Newcastle upon Tyne, United Kingdom. The documented product line referenced in the source data is the A2 single-seal industrial cable gland series. The company is listed under the cable gland category with the A2 series as the published technical reference point. Country of origin, category placement, and the A2 designation are the principal procurement identifiers available from the supplied documentation.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • CMP corporate context is retained from its official company page. A2 facts and visual are limited to the cited industrial cable-gland range; no wider product, certification, sales or service claim is asserted. [S8]Company-stated

Frequently asked questions

What Cable Gland product is documented for CMP Products Ltd?

The retained product material names A2 single-seal industrial cable glands. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published cable type should a buyer compare?

The cited product material records: Single-seal design for unarmoured and braid-armoured cables. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published environment should a buyer compare?

The cited product material records: IP66/IP67/IP68 and a standard -60 to +130 °C temperature range. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.