Electric Ball Valve manufacturer profile

DynaQuip Controls Corporation

DynaQuip Controls Corporation is an electric ball valve manufacturer based in St. Clair, Missouri, United States. [S2][S1]

Country
United States [S1]
City
St. Clair, Missouri [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Valve construction
The cited E2C28AJE07 item is 2 in, two-piece carbon steel, full-port FNPT with a 316 stainless-steel ball and RTFE seats. [S4]
Power and pressure data
E2C28AJE07 is listed as 115 VAC, with 300 psi operating pressure and 1,000 psi CWP. [S5]
E2C28AJE07 electric actuated ball valve
Official product image [S11]

Evidence scope

The retained official product route documents: DynaQuip documents E2C28AJE07 as a two-piece carbon-steel, full-port FNPT electrically actuated ball valve. This dossier uses that cited route as the editorial scope. [S7]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S9]

Electric Ball Valve

Documented series: DynaQuip E2C28AJE07 electrically actuated full-port ball valve.

DynaQuip documents E2C28AJE07 as a two-piece carbon-steel, full-port FNPT electrically actuated ball valve. [S7]

Documented specifications for Electric Ball Valve
Pressure rating200 psi [S10]
Valve construction
The cited E2C28AJE07 item is 2 in, two-piece carbon steel, full-port FNPT with a 316 stainless-steel ball and RTFE seats. [S4]
Power and pressure data
E2C28AJE07 is listed as 115 VAC, with 300 psi operating pressure and 1,000 psi CWP. [S5]
  • DynaQuip E2C28AJE07 electrically actuated full-port ball valve. [S6]

Selection fit: Start with E2C28AJE07 when a 2 in carbon-steel, full-port FNPT electrically actuated ball valve with 115 VAC and its cited pressure ratings fits the duty. Confirm medium, temperature, cycle, approvals and final pressure basis with DynaQuip. [S8]

Product range and documented series

DynaQuip documents E2C28AJE07 as a two-piece carbon-steel, full-port FNPT electrically actuated ball valve. [S7]

  • DynaQuip E2C28AJE07 electrically actuated full-port ball valve. [S6]Source note: E2C28AJE07; electrically actuated ball valve

Procurement fit

Selection of the DynaQuip E2C28AJE07 is appropriate when the duty requires a 2 in electrically actuated ball valve in carbon-steel two-piece body construction with full-port FNPT ends, 115 VAC actuator supply, and the cited 300 psi operating and 1,000 psi CWP ratings. The directory entry notes that medium compatibility, temperature limits, duty cycle, applicable approvals, and the final pressure basis must be confirmed directly with DynaQuip Controls Corporation before commitment.

Technical capabilities

The DynaQuip E2C28AJE07 is documented as a 2 in full-port ball valve with FNPT end connections. Body construction is two-piece carbon steel, with a 316 stainless-steel ball and RTFE seats. The actuator is specified for 115 VAC power. Operating pressure is listed at 300 psi, with a cold working pressure of 1,000 psi. No further construction details, torque figures, cycle ratings, or material options are recorded in the source data.

Markets and applications

The directory places DynaQuip Controls Corporation under the electric ball valve category for general industrial specification use. The documented E2C28AJE07 configuration specifies a 2 in full-port carbon-steel body with 316 stainless-steel ball and RTFE seats at 300 psi operating pressure. Specific industry segments, target applications, installation environments, and end-user references are not publicly documented in the source record, so any sector mapping should be verified with the manufacturer.

Evidence limitations

Several procurement fields are not publicly documented in the source record. These include actuator torque output, cycle life, duty rating, enclosure or ingress protection class, temperature limits, compatible media, agency approvals, electrical connector type, and any optional accessory list. Warranty terms, lead time, country of origin for individual components, and additional valve sizes or series within the DynaQuip electric ball valve range are also not publicly documented. Pricing and authorized distributor information are likewise absent.

Editorial summary

DynaQuip Controls Corporation is a United States manufacturer based in St. Clair, Missouri, documented in the industrial directory under the electric ball valve category. The single cited configuration is the DynaQuip E2C28AJE07 electrically actuated full-port ball valve. Profile coverage is limited to the facts recorded for that series, with no additional series, accessories, or control electronics documented in the source record.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S9]
  • Certifications [S9]
  • Availability or stock [S9]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • DynaQuip legal identity and St. Clair location are retained from official terms. E2C28AJE07 construction, power, pressure and page-bound product image are scoped only to that cited item route. Revenue, certification, stock, delivery and service claims were not asserted. [S9]Company-stated

Frequently asked questions

What Electric Ball Valve product is documented for DynaQuip Controls Corporation?

The retained product material names DynaQuip E2C28AJE07 electrically actuated full-port ball valve. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published valve construction should a buyer compare?

The cited product material records: The cited E2C28AJE07 item is 2 in, two-piece carbon steel, full-port FNPT with a 316 stainless-steel ball and RTFE seats. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published power and pressure data should a buyer compare?

The cited product material records: E2C28AJE07 is listed as 115 VAC, with 300 psi operating pressure and 1,000 psi CWP. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S9]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.