Pinch Valve manufacturer profile

Elasto-Valve Rubber Products Inc.

Elasto-Valve Rubber Products Inc. is a pinch valve manufacturer based in Greater Sudbury, Canada. [S2][S1]

Country
Canada [S1]
City
Greater Sudbury [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Sleeve options
The cited Series AJ range supports double-wall, reduced-port and food-grade sleeve options. [S4]
Published body and pressure
The cited table lists cast iron, aluminum or stainless body choices and a 125 psi maximum working pressure across the listed sizes. [S5]
Pinch Valve - Series AJ
Official product image [S6]

Evidence scope

The retained official product route documents: EVR documents Series AJ pinch valves with a split body for sleeve replacement. This dossier uses that cited route as the editorial scope. [S7]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S9]

Pinch Valve

Documented series: EVR Series AJ pinch valves.

EVR documents Series AJ pinch valves with a split body for sleeve replacement. [S7]

Documented specifications for Pinch Valve
Materialcast iron [S10]
Sleeve options
The cited Series AJ range supports double-wall, reduced-port and food-grade sleeve options. [S4]
Published body and pressure
The cited table lists cast iron, aluminum or stainless body choices and a 125 psi maximum working pressure across the listed sizes. [S5]
  • EVR Series AJ pinch valves. [S6]

Selection fit: Start with Series AJ when a split-body valve and the cited sleeve, body and 125 psi working-pressure context fit the duty. Confirm selected sleeve, body, size, medium and final configuration with EVR. [S8]

Product range and documented series

EVR documents Series AJ pinch valves with a split body for sleeve replacement. [S7]

  • EVR Series AJ pinch valves. [S6]Source note: Pinch Valve - Series AJ

Procurement fit

Series AJ is the documented entry point when a split-body pinch valve is required and the cited sleeve, body, and 125 psi working-pressure envelope match the service duty. Sleeve configurations documented for the range include double-wall, reduced-port, and food-grade options. Selected sleeve, body, size, medium, and final configuration should be confirmed directly with EVR before release of purchase order, as the cited table does not enumerate every variant.

Technical capabilities

The Series AJ range is documented as a split-body pinch valve at 2700 mm supply length. Documented sleeve options are double-wall, reduced-port, and food-grade. Documented body materials are cast iron, aluminum, or stainless. The published maximum working pressure is 125 psi across the listed sizes. No additional pressure classes, temperature ratings, end connections, or actuation interfaces are documented in the cited source material.

Markets and applications

The cited documentation does not enumerate specific end markets, industries, or application case studies for the EVR Series AJ. The manufacturer is located in Greater Sudbury, Canada, and the pinch valve category is the only product area listed in the directory entry. Common buying fields such as typical service media, temperature range, and actuator type are not publicly documented in the source.

Evidence limitations

Pricing, lead time, available sizes, end connections, actuation options, temperature limits, certifications, and warranty terms are not publicly documented in the cited source. Specific market segments, installed-base references, and project case studies are also not publicly documented. Confirm all selection parameters, dimensional tolerances, and commercial terms directly with Elasto-Valve Rubber Products Inc. before procurement.

Editorial summary

Elasto-Valve Rubber Products Inc. is a Canadian manufacturer based in Greater Sudbury, documented in this directory under the pinch valve category. The cited product line is the EVR Series AJ pinch valves, a split-body design supplied at a length of 2700 mm. Body materials documented in the cited table include cast iron, aluminum, or stainless, with a 125 psi maximum working pressure across the listed sizes.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S9]
  • Certifications [S9]
  • Availability or stock [S9]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Elasto-Valve legal identity and Greater Sudbury location are retained from its official company page. Series AJ construction, sleeve/body options, pressure context and page-bound image are scoped only to the cited route. Revenue, certification, stock, delivery and service claims were not asserted. [S9]Company-stated

Frequently asked questions

What Pinch Valve product is documented for Elasto-Valve Rubber Products Inc.?

The retained product material names EVR Series AJ pinch valves. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published sleeve options should a buyer compare?

The cited product material records: The cited Series AJ range supports double-wall, reduced-port and food-grade sleeve options. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published body and pressure should a buyer compare?

The cited product material records: The cited table lists cast iron, aluminum or stainless body choices and a 125 psi maximum working pressure across the listed sizes. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S9]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.