Emergency Stop Button manufacturer profile

EUCHNER GmbH + Co. KG

EUCHNER GmbH + Co. KG is an emergency stop button manufacturer based in Leinfelden-Echterdingen, Germany. [S2][S1]

Country
Germany [S1]
City
Leinfelden-Echterdingen [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Housing and connection
The switch uses a plastic housing, pull-to-reset button, three M20 × 1.5 cable entries and four switching contacts. [S4]
Environmental limits
The page lists IP67 protection, a -25 to 70 °C ambient range and 300 N actuation force. [S5]
EUCHNER RPS3131PC300M rope-pull emergency-stop switch
Official product image [S6]

Evidence scope

The retained official product route documents: EUCHNER documents RPS3131PC300M as a finished rope-pull emergency-stop switch for extended machine areas. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S7]

Emergency Stop Button

Documented specifications for Emergency Stop Button
Published product factEUCHNER RPS3131PC300M rope-pull emergency-stop switch [S6]

Product range and documented series

EUCHNER documents RPS3131PC300M as a finished rope-pull emergency-stop switch for extended machine areas. [S6]

  • EUCHNER RPS3131PC300M rope-pull emergency-stop switch [S6]Source note: EUCHNER RPS3131PC300M rope-pull emergency-stop switch

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S7]
  • Availability or stock [S7]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to EUCHNER RPS3131PC300M rope-pull emergency-stop switch; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S7]Company-stated

Frequently asked questions

What Emergency Stop Button product is documented for EUCHNER GmbH + Co. KG?

The retained product material names EUCHNER RPS3131PC300M rope-pull emergency-stop switch. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published housing and connection should a buyer compare?

The cited product material records: The switch uses a plastic housing, pull-to-reset button, three M20 × 1.5 cable entries and four switching contacts. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published environmental limits should a buyer compare?

The cited product material records: The page lists IP67 protection, a -25 to 70 °C ambient range and 300 N actuation force. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S7]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.