Industrial Buzzer manufacturer profile

European Safety Systems Ltd

European Safety Systems Ltd is an industrial buzzer manufacturer based in London, United Kingdom. [S2][S1]

Country
United Kingdom [S1]
City
London [S2]
Website
e2s.com

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Audible output
MA121 is rated up to 126 dB(A) at 1 m and is offered in listed DC and AC voltage variants. [S4]
Enclosure
The finished device lists IP66/IP67 and Type 4, 4X and 13 enclosure ratings. [S5]
E2S MA121 alarm horn sounder
Official product image [S6]

Evidence scope

The retained official product route documents: European Safety Systems documents MA121 as a finished industrial alarm horn sounder. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Industrial Buzzer

Documented series: E2S MA121 alarm horn sounder

European Safety Systems documents MA121 as a finished industrial alarm horn sounder. [S6]

Documented specifications for Industrial Buzzer
Ingress protectionIP66 [S9]
Service temperature125°C [S10]
Materialstainless steel [S11]
Audible output
MA121 is rated up to 126 dB(A) at 1 m and is offered in listed DC and AC voltage variants. [S4]
Enclosure
The finished device lists IP66/IP67 and Type 4, 4X and 13 enclosure ratings. [S5]
  • E2S MA121 alarm horn sounder [S6]

Selection fit: Confirm voltage, current, tone stages, enclosure requirement and approvals by exact MA121 suffix. [S7]

Product range and documented series

European Safety Systems documents MA121 as a finished industrial alarm horn sounder. [S6]

  • E2S MA121 alarm horn sounder [S6]Source note: E2S MA121 alarm horn sounder

Procurement fit

The MA121 alarm horn sounder carries the procurement instruction to confirm voltage, current, tone stages, enclosure requirement and approvals by exact MA121 suffix. The main specification lists IP66, while the enclosure section separately documents IP66/IP67 along with Type 4, 4X and 13 enclosure ratings. Buyers should order against the specific MA121 suffix to obtain the required DC or AC voltage variant, the appropriate tone stages, and the approval set relevant to the installation. Supply length is recorded as 300m.

Technical capabilities

The MA121 is documented with an audible output up to 126 dB(A) at 1m. The voltage range is 10-30V across the listed DC and AC voltage variants. Service temperature is +55°C. The enclosure section documents ingress protection as IP66/IP67 with Type 4, 4X and 13 ratings, while the headline specification lists IP66. Housing material is stainless steel, finished in RAL7038. Flame recognition is UL94 V0. Supply length is documented as 300m.

Markets and applications

The documentation presents the E2S MA121 alarm horn sounder as an industrial signalling device without specifying target market sectors. The combination of stainless steel construction, UL94 V0 flammability rating, and the documented enclosure ratings of IP66/IP67 and Type 4, 4X and 13 indicates suitability for industrial environments with dust and water exposure. Specific application sectors, installed base references, and end-user case data are not publicly documented. Buyers requiring sector-specific validation will need to approach the manufacturer directly for application evidence.

Evidence limitations

Several procurement fields commonly expected in a manufacturer profile are not publicly documented for European Safety Systems Ltd. Specific installed base figures, customer references, certification body listings beyond UL94 V0, total model count, and production capacity are not publicly documented. The E2S MA121 is the sole series listed under the industrial buzzer category in the available facts, and any additional product lines carried by the manufacturer are not publicly documented within this dataset. Recent commercial signals are not publicly documented.

Editorial summary

European Safety Systems Ltd, based in London, United Kingdom, is documented under the industrial buzzer category. The single documented series is the E2S MA121 alarm horn sounder. The device is recorded with stainless steel construction, RAL7038 colour finish, and UL94 V0 flame recognition. Electrical supply is listed at a voltage range of 10-30V. Service temperature is documented at +55°C, and supply length is recorded as 300m. The product line is identified by the E2S designation.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to E2S MA121 alarm horn sounder; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S8]Company-stated

Frequently asked questions

What Industrial Buzzer product is documented for European Safety Systems Ltd?

The retained product material names E2S MA121 alarm horn sounder. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published audible output should a buyer compare?

The cited product material records: MA121 is rated up to 126 dB(A) at 1 m and is offered in listed DC and AC voltage variants. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published enclosure should a buyer compare?

The cited product material records: The finished device lists IP66/IP67 and Type 4, 4X and 13 enclosure ratings. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.