Centrifugal Pump manufacturer profile

Finish Thompson Inc.

Finish Thompson Inc. is a centrifugal pump manufacturer based in Erie, Pennsylvania, United States. [S2][S1]

Country
United States [S1]
City
Erie, Pennsylvania [S2]
SP Series; SP10
Official product image [S15]

Evidence scope

The retained official product route documents: Finish Thompson documents sealed plastic centrifugal pumps and magnetic-drive sealless centrifugal-pump families. This dossier uses that cited route as the editorial scope. [S7]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S11]

Centrifugal Pump

Documented series: Finish Thompson GP sealed plastic centrifugal pumps in polypropylene or PVDF, plus DB/SP, VKC, UC and MSKC magnetic-drive centrifugal-pump families.

Finish Thompson documents sealed plastic centrifugal pumps and magnetic-drive sealless centrifugal-pump families. [S7]

Documented specifications for Centrifugal Pump
Pressure rating90 psi [S12]
Service temperature82°C [S13]
Flow rate1 to 221 gpm [S14]
  • Finish Thompson GP sealed plastic centrifugal pumps in polypropylene or PVDF, plus DB/SP, VKC, UC and MSKC magnetic-drive centrifugal-pump families. [S4]
  • Finish Thompson SP Series self-priming sealless plastic magnetic-drive centrifugal pumps, including SP10 and SP11 models. [S5]
  • Finish Thompson SP Series self-priming sealless magnetic-drive centrifugal pumps, including SP10 and SP11. [S6]

Selection fit: Start with Finish Thompson GP or its magnetic-drive families when corrosion-resistant plastics or sealless chemical-service routing is required; the brochure lists chemical manufacturing and distribution, fume scrubbers and chemical sump mixtures. Confirm chemistry, temperature, concentration, materials, seal or mag-drive selection, standards, availability and lead time with Finish Thompson. [S8]

Product range and documented series

Finish Thompson documents sealed plastic centrifugal pumps and magnetic-drive sealless centrifugal-pump families. [S7]

  • Finish Thompson GP sealed plastic centrifugal pumps in polypropylene or PVDF, plus DB/SP, VKC, UC and MSKC magnetic-drive centrifugal-pump families. [S4]Source note: Chemical Resistant Polypropylene or PVDF; DB & SP; VKC; UC; MSKC
  • Finish Thompson SP Series self-priming sealless plastic magnetic-drive centrifugal pumps, including SP10 and SP11 models. [S5]Source note: SP Series; SP10; SP11; Sealless magnetic drive centrifugal pumps
  • Finish Thompson SP Series self-priming sealless magnetic-drive centrifugal pumps, including SP10 and SP11. [S6]Source note: SP Series; Self-Priming; SP10; SP11; sealless magnetic drive centrifugal pumps

Procurement fit

The GP series and the magnetic-drive families DB, SP, VKC, UC and MSKC are the documented entry points where corrosion-resistant plastic or sealless chemical-service routing is required. The SP Series is the appropriate starting reference when a sealless plastic magnetic-drive centrifugal pump comparison is needed, particularly for corrosive or toxic chemical handling. Direct confirmation with Finish Thompson is recommended for chemistry, temperature, concentration, materials, seal or mag-drive selection, applicable standards, availability and lead time before purchase.

Technical capabilities

Documented technical parameters include a supply length of 25.3 m and a service temperature of 82° C. The GP series is offered as a sealed plastic centrifugal pump available in polypropylene or PVDF construction. The DB, SP, VKC, UC and MSKC designations are documented as magnetic-drive centrifugal pump families. No additional head, flow, pressure, motor power, speed, efficiency, viscosity, NPSH, or material grade values are recorded in the documented source material beyond what is reproduced here.

Markets and applications

The documented application scope is limited to entries appearing in the supplier's brochure: chemical manufacturing and distribution, fume scrubbers, and chemical sump mixtures. The SP Series is described for corrosive or toxic chemical handling duties. No additional industry verticals, end-user segments, installation environments, or process media beyond those named are recorded in the supplied facts. Buyers should request confirmation directly from Finish Thompson for any sector-specific qualification, regulatory listing, or application reference not captured in the source material.

Evidence limitations

Several standard buying fields are not publicly documented in the source material reviewed. These include flow rate, total head, discharge pressure, motor power, speed, efficiency, viscosity limits, NPSH requirements, specific material grade designations, weights, dimensions, sound levels, available seal or drive variants, third-party certifications, approvals, warranty terms, and pricing. Detailed country of manufacture beyond the United States designation, current lead times, distributor network coverage, and installed base references are also not publicly documented. All selection parameters beyond the recorded supply length of 25.3 m and service temperature of 82° C require direct supplier confirmation.

Editorial summary

Finish Thompson Inc. is a United States based manufacturer of centrifugal pumps, located in Erie, Pennsylvania. The documented product range comprises the GP sealed plastic centrifugal pump series in polypropylene or PVDF, together with the DB, SP, VKC, UC and MSKC magnetic-drive centrifugal pump families. The supplied documentation records a supply length figure of 25.3 m and a service temperature of 82° C. Application contexts referenced in the supplier's brochure include chemical manufacturing and distribution, fume scrubbers, and chemical sump mixtures.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Finish Thompson identity and Erie headquarters are retained from its official literature page. CP/GP centrifugal-pump range and buyer-fit evidence is retained from its official brochure; SP Series magnetic-drive evidence and the SP10 product image are retained from the official sealless-plastic-pumps page. Revenue, certification, availability and delivery claims were not asserted. [S11]Company-stated

Frequently asked questions

What Centrifugal Pump product is documented for Finish Thompson Inc.?

The retained product material names Finish Thompson GP sealed plastic centrifugal pumps in polypropylene or PVDF, plus DB/SP, VKC, UC and MSKC magnetic-drive centrifugal-pump families. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S11]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.