Diaphragm Valve manufacturer profile

Göpfert AG

Göpfert AG is a diaphragm valve manufacturer based in Weddingstedt, Germany. [S2][S1]

Country
Germany [S1]
City
Weddingstedt [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Size and connection
The line covers DIN 15–DIN 200 in straight and angle forms, with flange or socket connections. [S4]
Material and actuation choices
Listed choices include gunmetal or bronze bodies, brass or stainless-steel stems, EPDM or NBR diaphragms, and handwheel, electric, pneumatic or hydraulic actuation. [S5]
VG 85238 PN 6 DN 100 diaphragm valve
Official product image [S11]

Evidence scope

The retained official product route documents: Göpfert documents diaphragm valves in straight and angle forms with manual, electric, pneumatic and hydraulic actuation options. This dossier uses that cited route as the editorial scope. [S7]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S9]

Diaphragm Valve

Documented series: Göpfert diaphragm valves from DIN 15–DIN 200 in straight or angle forms, with flange or socket connections.

Göpfert documents diaphragm valves in straight and angle forms with manual, electric, pneumatic and hydraulic actuation options. [S7]

Documented specifications for Diaphragm Valve
Materialstainless steel [S10]
Size and connection
The line covers DIN 15–DIN 200 in straight and angle forms, with flange or socket connections. [S4]
Material and actuation choices
Listed choices include gunmetal or bronze bodies, brass or stainless-steel stems, EPDM or NBR diaphragms, and handwheel, electric, pneumatic or hydraulic actuation. [S5]
  • Göpfert diaphragm valves from DIN 15–DIN 200 in straight or angle forms, with flange or socket connections. [S6]

Selection fit: Start with Göpfert's diaphragm-valve line when its size, form, connection, body, diaphragm and actuation options match the service; verify the selected configuration, pressure, temperature and compatibility with Göpfert. [S8]

Product range and documented series

Göpfert documents diaphragm valves in straight and angle forms with manual, electric, pneumatic and hydraulic actuation options. [S7]

  • Göpfert diaphragm valves from DIN 15–DIN 200 in straight or angle forms, with flange or socket connections. [S6]Source note: Diaphragm valves; DIN 15–DIN 200; straight and angle forms

Procurement fit

The diaphragm valve line suits buyers whose process duty can be matched to a documented size, form, connection, body, diaphragm and actuation combination from the available matrix. The published guidance is to start with this line when those parameters align with the service and to confirm the selected configuration, pressure rating, temperature limit and chemical compatibility directly with Göpfert prior to order release. Lead time, minimum order quantity, pricing tiers and approved distributor channels are not publicly documented in the supplied record.

Technical capabilities

The diaphragm valve range is documented at DIN 15 through DIN 200 sizes, with straight and angle body forms and flange or socket end connections. Body material options include gunmetal or bronze. Stem material options include brass or stainless steel. Diaphragm elastomer options are EPDM or NBR. Actuation methods listed are handwheel, electric, pneumatic and hydraulic. Detailed pressure ratings, temperature limits, face-to-face dimensions, leakage classes and specific actuation torque or thrust values are not publicly documented in the supplied record.

Markets and applications

The documented record does not identify specific end markets, industries or application segments served. Based on the available size range, DIN 15 through DIN 200, the straight and angle body forms, flange or socket connections, and the material combinations including stainless steel, gunmetal, bronze, EPDM and NBR, the line is structurally suited to general fluid isolation duties where elastomer diaphragms are acceptable. Confirmation of suitability for water, chemical, hygienic or gas service is not publicly documented and should be verified with the manufacturer.

Evidence limitations

Several common procurement and engineering fields are not publicly documented. These include pressure and temperature ratings, leakage or shutoff class, face-to-face dimensions, flange standard details, diaphragm life cycles, actuation torque or thrust figures, electrical supply requirements for powered actuators, certification listings, quality system registrations, factory test reports, lead times, minimum order quantities, pricing, distributor network, installation manuals and recommended spares. The cited procurement note advises direct verification of configuration, pressure, temperature and compatibility with Göpfert before order release.

Editorial summary

Göpfert AG is a German manufacturer based in Weddingstedt, listed in the diaphragm valve category. The documented diaphragm valve product line covers DIN 15 through DIN 200 sizes, offered in straight and angle body forms, with flange or socket connection ends. Configurations span multiple body, stem, diaphragm and actuation materials, allowing the line to address a range of service conditions. Specification review should align the selected size, form, connection and material combination with the intended duty before release to procurement.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S9]
  • Certifications [S9]
  • Availability or stock [S9]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Göpfert identity and Weddingstedt location are retained from its official company page. Its diaphragm-valve size, form, connection, material, actuation and product-image evidence is scoped only to the cited product route. Revenue, certification, stock, delivery and service claims were not asserted. [S9]Company-stated

Frequently asked questions

What Diaphragm Valve product is documented for Göpfert AG?

The retained product material names Göpfert diaphragm valves from DIN 15–DIN 200 in straight or angle forms, with flange or socket connections. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published size and connection should a buyer compare?

The cited product material records: The line covers DIN 15–DIN 200 in straight and angle forms, with flange or socket connections. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published material and actuation choices should a buyer compare?

The cited product material records: Listed choices include gunmetal or bronze bodies, brass or stainless-steel stems, EPDM or NBR diaphragms, and handwheel, electric, pneumatic or hydraulic actuation. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S9]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.