Laser Marker manufacturer profile

Gravotech Marking SAS

Gravotech Marking SAS is a laser marker manufacturer based in France. [S1]

Country
France [S1]
Gravotech LW2 Class 1 laser marking station
Official product image [S7]

Evidence scope

The retained official product route documents: Gravotech Marking SAS manufactures industrial laser marking stations including the LW2 Class 1 enclosure. This dossier uses that cited route as the editorial scope. [S4]

Laser Marker

Documented series: Gravotech LW2 Class 1 laser marking station

Gravotech Marking SAS manufactures industrial laser marking stations including the LW2 Class 1 enclosure. [S4]

Documented specifications for Laser Marker
Materialaluminum [S6]
  • Gravotech LW2 Class 1 laser marking station [S3]

Selection fit: Class 1 laser marking station for identification on plastics and metals, with marking areas from 65 x 65 mm to 205 x 205 mm. [S5]

Product range and documented series

Gravotech Marking SAS manufactures industrial laser marking stations including the LW2 Class 1 enclosure. [S4]

  • Gravotech LW2 Class 1 laser marking station [S3]Source note: Class 1 Laser Marking Station - LW2 | Gravotech (ex Technifor) Skip to main content FIND US SUPPORT Created with Lunacy E-SHO

Procurement fit

The Gravotech LW2 is documented as a Class 1 laser marking station intended for identification marking on plastics and metals. The unit supports marking areas from 65 x 65 mm to 205 x 205 mm, providing a range that covers small component marking up to medium-format parts. Procurement considerations should be matched to the specific marking area required for the intended substrate.

Technical capabilities

The Gravotech LW2 is a Class 1 laser marking station constructed from stainless steel. The documented section size is 610 x 305 mm, and the supply length is 1220 mm. Marking areas are specified from 65 x 65 mm to 205 x 205 mm. No further technical parameters such as laser source type, wavelength, power output, or control interface are recorded in the available data.

Markets and applications

The Gravotech LW2 is documented for identification marking on plastics and metals. The stainless steel construction and Class 1 laser classification are the only application-relevant parameters recorded in the available specification data. Specific industry verticals, end-user references, and application case data are not provided in the documented facts.

Evidence limitations

Several common procurement fields are not publicly documented, including: laser source type and wavelength, power output, axis count, weight, electrical supply requirements, software or controller interface, supported file formats, cycle time, installed base, distribution network, and after-sales service scope. Certifications, compliance markings beyond the Class 1 laser designation, and warranty terms are also not publicly documented.

Editorial summary

Gravotech Marking SAS is a France-based manufacturer active in the laser marker category. The documented product line referenced for this entry is the Gravotech LW2 Class 1 laser marking station. Categorization is limited to laser marking equipment; no additional product families are recorded in the available specification data.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Frequently asked questions

What Laser Marker product is documented for Gravotech Marking SAS?

The retained product material names Gravotech LW2 Class 1 laser marking station. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S3]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.