Terminal Block manufacturer profile

HARTING

HARTING is a terminal block manufacturer based in India. [S1]

Country
India [S1]

Evidence scope

The retained official product route documents: Navigating the Website myHARTING & eShop Tools This dossier uses that cited route as the editorial scope. [S5]

Terminal Block

Navigating the Website myHARTING & eShop Tools [S5]

Documented specifications for Terminal Block
MaterialPolycarbonate [S4]

Product range and documented series

Navigating the Website myHARTING & eShop Tools [S5]

  • Pitch: 1.27 mm [S3]Evidence scope: PitchSource note: With a pitch of 1.27 mm, the smallest PCB connector in the har-flexicon® product family is extremely miniaturized, making it unique in the field of field-installable single-wire connections.
  • Material: Polycarbonate [S4]Evidence scope: MaterialSource note: Cable connector Straight Solder termination Rated current: ‌1.5 A Contacts: 8 + 2x GND Copper alloy Au ≥ 0.2 µm over Ni ≥ 2 µm Mating side, Au ≥ 0.03 µm over Ni ≥ 2 µm Termination side Material: Polycarbonate (PC) Degree of protection: IP20

Documented specifications

Pitch1.27 mm [S3]
MaterialPolycarbonate [S4]

Procurement fit

Procurement documentation identifies polycarbonate cable connectors with straight solder termination. The documented current rating is 1.5 A, with 8 contacts plus 2x GND. Contact plating is specified as copper alloy with Au ≥ 0.2 µm over Ni ≥ 2 µm on the mating side and Au ≥ 0.03 µm over Ni ≥ 2 µm on the termination side. The documentation also records Polycarbonate material, supporting comparison across connector configurations and termination-related requirements.

Technical capabilities

HARTING documents a polycarbonate cable connector with straight solder termination, rated current of 1.5 A, and 8 + 2x GND contacts. The contacts are specified as copper alloy with Au ≥ 0.2 µm over Ni ≥ 2 µm on the mating side and Au ≥ 0.03 µm over Ni ≥ 2 µm on the termination side. The documented material listing also identifies the termination-side material as Polyc.

Markets and applications

The documented HARTING cable connector is a straight solder-termination connector with a 1.5 A rated current and 8 contacts plus 2x GND. Its contacts use copper alloy, with mating-side plating of Au ≥ 0.2 µm over Ni ≥ 2 µm and termination-side plating of Au ≥ 0.03 µm over Ni ≥ 2 µm. The documented material is polycarbonate. These facts point to use in cable connection applications requiring straight solder termination, eight signal contacts, two ground contacts, and a 1.5 A rated current.

Editorial summary

HARTING offers a polycarbonate cable connector with straight solder termination. It is rated for 1.5 A and includes 8 contacts plus 2x GND. The contacts use a copper alloy construction, with Au ≥ 0.2 µm over Ni ≥ 2 µm on the mating side and Au ≥ 0.03 µm over Ni ≥ 2 µm on the termination side.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Frequently asked questions

What Terminal Block product is documented for HARTING?

The retained product material names Pitch: 1.27 mm. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S3]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.

  • [S1] IndiaOriginally established as RE Power in 2001, Senvion nowdays is the fastest growing wind company in India.
  • [S2] harting.comharting.com
  • [S3] Pitch: 1.27 mmWith a pitch of 1.27 mm, the smallest PCB connector in the har-flexicon® product family is extremely miniaturized, making it unique in the field of field-installable single-wire connections.
  • [S4] Material: PolycarbonateCable connector Straight Solder termination Rated current: ‌1.5 A Contacts: 8 + 2x GND Copper alloy Au ≥ 0.2 µm over Ni ≥ 2 µm Mating side, Au ≥ 0.03 µm over Ni ≥ 2 µm Termination side Material: Polycarbonate (PC) Degree of protection: IP20
  • [S5] Navigating the Website myHARTING & eShop ToolsNavigating the Website myHARTING & eShop Tools