Sewage Pump manufacturer profile

HOMA Pumpenfabrik GmbH

HOMA Pumpenfabrik GmbH is a sewage pump manufacturer based in Neunkirchen-Seelscheid, Germany. [S2][S1]

Country
Germany [S1]
City
Neunkirchen-Seelscheid [S2]
TP70 submersible pump
Official product image [S9]

Evidence scope

The retained official product route documents: HOMA publishes the TP70 route for submersible wastewater, sewage and effluent pumping. This dossier uses that cited route as the editorial scope. [S5]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S6]

Sewage Pump

Documented series: TP70 submersible pumps for wastewater, sewage or effluent

HOMA publishes the TP70 route for submersible wastewater, sewage and effluent pumping. [S5]

Documented specifications for Sewage Pump
Service temperature40 °C [S7]
MaterialAluminium [S8]
  • TP70 submersible pumps for wastewater, sewage or effluent [S4]

Selection fit: Consider TP70 only for the stated wastewater, sewage or effluent route; confirm solids, hydraulics, materials, approvals, availability and lead time with HOMA. [S5]

Product range and documented series

HOMA publishes the TP70 route for submersible wastewater, sewage and effluent pumping. [S5]

  • TP70 submersible pumps for wastewater, sewage or effluent [S4]Source note: TP70 - Submersible pumps for sewage and effluent

Procurement fit

The documented TP70 series is specified for wastewater, sewage, or effluent service. The recorded procurement note states to consider TP70 only for the stated wastewater, sewage or effluent route and to confirm solids, hydraulics, materials, approvals, availability and lead time with HOMA. No additional procurement criteria, distributor network, or commercial terms are publicly documented.

Technical capabilities

The documented TP70 submersible pump series is built in Cast iron. The service temperature is specified at 40° C, and the ingress protection rating is IP 68. These values reflect the only quantitative technical parameters recorded for this series in the available evidence. Hydraulic curves, flow and head ratings, motor power, voltage, solids passage, and impeller configuration are not publicly documented.

Markets and applications

Based on the documented specification, the TP70 series is intended for wastewater, sewage, or effluent applications. The Cast iron construction, 40° C service temperature, and IP 68 rating define the operational envelope recorded in the evidence. End-use sectors, installed base, geographic deployment, and reference projects are not publicly documented. Recent market commentary on the broader submersible pump segment is provided for context only and is not a product specification.

Evidence limitations

The following items are not publicly documented: solids handling capacity, hydraulic performance data, motor power, voltage and frequency options, impeller type, discharge size, cable specifications, ATEX or other approvals, certifications, warranty terms, lead time, distributor network, pricing, other product series beyond TP70, company history, company size, customer references, installed base, service network, and spare parts availability. Only the TP70 series designation, Cast iron material, 40° C service temperature, and IP 68 ingress protection are documented.

Editorial summary

HOMA Pumpenfabrik GmbH is a German manufacturer based in Neunkirchen-Seelscheid. The company is documented in this directory under the sewage pump category. Documented product coverage for this category is limited to the TP70 series of submersible pumps intended for wastewater, sewage, or effluent service. Other product lines, company size, founding date, and corporate history are not publicly documented in the available specification record.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S6]
  • Certifications [S6]
  • Availability or stock [S6]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Company identity and location are retained from HOMA's official contact page. TP70 sewage-pump scope and its exact official product image are retained from the TP70 product route. Revenue, certification, availability and delivery claims were not asserted. [S6]Company-stated

Frequently asked questions

What Sewage Pump product is documented for HOMA Pumpenfabrik GmbH?

The retained product material names TP70 submersible pumps for wastewater, sewage or effluent. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S6]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.