Cable Gland manufacturer profile

HUMMEL AG

HUMMEL AG is a cable gland manufacturer based in Denzlingen, Germany. [S2][S1]

Country
Germany [S1]
City
Denzlingen [S2]
Website
hummel.com

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Cable range
22–32 mm cable-diameter range. [S4]
Protection
IP68 at 10 bar for 30 minutes, IP69K and -40 to +100 °C. [S5]
HSK-M PG 36
Official product image [S6]

Evidence scope

The retained official product route documents: HUMMEL documents HSK-M PG 36 as a nickel-plated brass cable gland. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Cable Gland

Documented series: HSK-M PG 36 nickel-plated brass cable gland.

HUMMEL documents HSK-M PG 36 as a nickel-plated brass cable gland. [S6]

Documented specifications for Cable Gland
StandardDIN EN 60529 [S9]
Materialstainless steel [S10]
Cable range
22–32 mm cable-diameter range. [S4]
Protection
IP68 at 10 bar for 30 minutes, IP69K and -40 to +100 °C. [S5]
  • HSK-M PG 36 nickel-plated brass cable gland. [S6]

Selection fit: Compare HSK-M PG 36 for a documented 22–32 mm cable and its cited IP68/IP69K environment, then confirm the final thread, cable and installation arrangement with HUMMEL. [S7]

Product range and documented series

HUMMEL documents HSK-M PG 36 as a nickel-plated brass cable gland. [S6]

  • HSK-M PG 36 nickel-plated brass cable gland. [S6]Source note: HSK-M PG 36

Procurement fit

The documented procurement guidance advises engineers to compare the HSK-M PG 36 against a 22 to 32 mm cable diameter range and its cited IP68 and IP69K environment, then confirm the final thread, cable, and installation arrangement directly with HUMMEL. This two-step comparison is appropriate when project specifications name a PG 36 thread, nickel-plated brass construction, and the cited ingress protection levels. Final part selection should not proceed without written confirmation of thread variant, sealing arrangement, and installation method from the manufacturer.

Technical capabilities

The documented HSK-M PG 36 cable gland is constructed in nickel-plated brass and accepts cable diameters from 22 to 32 mm. Ingress protection is stated as IP68 at 10 bar for 30 minutes, together with IP69K. The operating temperature range is documented from -40 to +100 °C. These values are reproduced exactly as listed and should be verified against the current HUMMEL datasheet before specification release, since environmental ratings depend on the matching locknut, sealing element, and installation torque values that are not documented here.

Markets and applications

Within the scope of the documented record, HUMMEL AG is associated with the cable gland product category only, and no specific end markets, industries, or application notes are publicly documented for this directory entry. Engineers specifying the HSK-M PG 36 should derive the application context from their own project requirements rather than from market information attributed to the manufacturer. Any inferred application positioning based on the IP68 and IP69K ratings and the cited temperature range remains a reader assumption, not a manufacturer claim.

Evidence limitations

Several common buying fields are not publicly documented for this entry. These include additional HSK-M series variants, alternative thread standards beyond PG 36, full material certification documents, ATEX or IECEx ratings, locknut and accessory part numbers, torque values, and current lead times. The recent signals review returned none matched, so no independent third-party observation is available to supplement the specification. Engineers should request all missing data directly from HUMMEL before issuing purchase orders or committing to installation drawings.

Editorial summary

HUMMEL AG is a manufacturer based in Denzlingen, Germany, recorded in this directory under the cable gland category. The single documented product line is the HSK-M PG 36 in nickel-plated brass. No additional series, sizes, or material options are listed in the present record. The entry should be read as a reference point for engineers evaluating the HSK-M PG 36 against project specifications, with any further product information to be obtained directly from the manufacturer. Buyers are advised to treat the directory record as a starting point rather than a complete catalogue.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Certifications [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • HUMMEL corporate context is retained from its imprint. HSK-M facts and visual are limited to the cited PG 36 product; no company-wide connector, certification, stock or sales claim is asserted. [S8]Company-stated

Frequently asked questions

What Cable Gland product is documented for HUMMEL AG?

The retained product material names HSK-M PG 36 nickel-plated brass cable gland. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published cable range should a buyer compare?

The cited product material records: 22–32 mm cable-diameter range. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published protection should a buyer compare?

The cited product material records: IP68 at 10 bar for 30 minutes, IP69K and -40 to +100 °C. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.