Procurement snapshot
Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.
Evidence scope
The retained official product route documents: IBOCO documents TS and TSH as rigid-PVC solid-wall wire-duct series supplied with covers. This dossier uses that cited route as the editorial scope. [S6]
The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]
Wiring Duct
Documented series: IBOCO TS/TSH solid-wall wire duct
IBOCO documents TS and TSH as rigid-PVC solid-wall wire-duct series supplied with covers. [S6]
| Flame / recognition | UL-Recognized [S9] |
|---|---|
| Colour | RAL 7030 [S10] |
- Mounting forms
- TS is supplied without mounting holes and TSH with mounting holes; both series include a cover. [S4]
- Material and length
- The page specifies light-gray RAL 7030 self-extinguishing PVC, 6 ft 6¾ in standard lengths and UL 94 V-0. [S5]
- IBOCO TS/TSH solid-wall wire duct [S6]
Selection fit: Compare mounting-hole form, duct section, standard length, PVC performance and cover requirement before selection. [S7]
Product range and documented series
IBOCO documents TS and TSH as rigid-PVC solid-wall wire-duct series supplied with covers. [S6]
- IBOCO TS/TSH solid-wall wire duct [S6]Source note: IBOCO TS/TSH solid-wall wire duct
Procurement fit
Selection should start from the documented procurement-fit criteria: compare mounting-hole form, duct section, standard length, PVC performance, and cover requirement. The TS variant suits installations where the installer will drill mounting holes to suit panel layout, while the TSH variant accepts fasteners through factory-formed holes. Both are supplied with a cover. Light-gray RAL 7030 rigid PVC and a single 6 ft 6¾ in standard length are documented. Duct section dimensions, temperature ratings, and quantity pricing are not publicly documented and should be confirmed with the manufacturer.
Technical capabilities
The TS/TSH series uses rigid PVC specified as self-extinguishing per UL 94 V-0, in light-gray RAL 7030. Mounting forms differ only in pre-punched holes: TS is supplied without mounting holes and TSH with mounting holes, and both include a cover. Standard stock length is 6 ft 6¾ in. The series is UL-Recognized. Mechanical properties such as impact strength, continuous-use temperature, chemical resistance, and specific slot patterns are not publicly documented in the available record and would need separate verification.
Markets and applications
The documented product is general-purpose solid-wall wiring duct for panel-building and electrical enclosure wiring management. RAL 7030 light-gray rigid PVC with UL 94 V-0 self-extinguishing behavior and UL-Recognized status positions the TS/TSH series for industrial control cabinets and similar wiring distribution. The factory hole-punched TSH form fits repeat panel runs, while the non-punched TS form suits custom hole patterns. Specific industry sectors, end-user references, and project counts are not publicly documented.
Evidence limitations
The available facts cover a single documented series, IBOCO TS/TSH solid-wall wire duct, with RAL 7030 rigid PVC, UL 94 V-0, UL-Recognized status, cover inclusion, and a 6 ft 6¾ in standard length. Duct cross-section dimensions, slot profiles, temperature ratings, chemical compatibility, and quantitative performance figures are not publicly documented. Approvals beyond UL-Recognized component status, lead times, MOQs, and pricing are not publicly documented. Additional product lines and company-level metrics are not publicly documented.
Editorial summary
IBOCO Corporation, based in Lakewood, United States, is documented in this directory under wiring duct. The product family identified is the IBOCO TS/TSH solid-wall wire duct. The series is offered in light-gray RAL 7030 rigid PVC and carries UL-Recognized component status. Standard length is 6 ft 6¾ in. Two mounting variants are listed: TS supplied without mounting holes, TSH supplied with mounting holes, and both ship with a cover. Material is described as self-extinguishing PVC rated UL 94 V-0. Other product lines, certifications, and operational metrics are not publicly documented.
Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.
Not published in retained sources
These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.
Research coverage
Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.
- Identity and location are retained from the cited official source. Product facts and visual are limited to IBOCO TS/TSH solid-wall wire duct; no unlisted company-wide performance, availability, factory or revenue claim is asserted. [S8]Company-stated
Frequently asked questions
What Wiring Duct product is documented for IBOCO Corporation?
The retained product material names IBOCO TS/TSH solid-wall wire duct. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]
Which published mounting forms should a buyer compare?
The cited product material records: TS is supplied without mounting holes and TSH with mounting holes; both series include a cover. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]
Which published material and length should a buyer compare?
The cited product material records: The page specifies light-gray RAL 7030 self-extinguishing PVC, 6 ft 6¾ in standard lengths and UL 94 V-0. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]
Which common buying fields are not published in the retained sources?
The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]
Research notes
The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.
- [S1] United StatesUnited States
- [S2] LakewoodLakewood
- [S3] iboco.comiboco.com
- [S4] TS is supplied without mounting holes and TSH with mounting holes; both series include a cover.TS is supplied without mounting holes and TSH with mounting holes; both series include a cover.
- [S5] The page specifies light-gray RAL 7030 self-extinguishing PVC, 6 ft 6¾ in standard lengths and UL 94 V-0.The page specifies light-gray RAL 7030 self-extinguishing PVC, 6 ft 6¾ in standard lengths and UL 94 V-0.
- [S6] IBOCO TS/TSH solid-wall wire ductIBOCO TS/TSH solid-wall wire duct
- [S7] Compare mounting-hole form, duct section, standard length, PVC performance and cover requirement before selection.Compare mounting-hole form, duct section, standard length, PVC performance and cover requirement before selection.
- [S8] Identity and location are retained from the cited official source. Product facts and visual are limited to IBOCO TS/TSH solid-wall wire duct; no unlisted company-wide performance, availability, factory or revenue claim is asserted.IBOCO Corporation; IBOCO TS/TSH solid-wall wire duct
- [S9] UL-RecognizedRoHS and UL-Recognized
- [S10] RAL 7030Our IBOCO TS/TSH solid wall duct series have all the standard features of IBOCO T1 Series slotted IBOCO Solid Wall Duct comes in LIGHT GREY RAL 7030.