Electricity Meter manufacturer profile

INEPRO Group B.V.

INEPRO Group B.V. is an electricity meter manufacturer based in Nieuw-Vennep, Netherlands. [S2][S1]

Country
Netherlands [S1]
City
Nieuw-Vennep [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Connection and mounting
PRO380-Mod is a three-phase 100 A meter in a four-module DIN enclosure. [S4]
Interface and certification
The page lists Modbus, MID or MIR, class B, two tariffs, a -40 to +70 C range and an S0 option. [S5]
inepro PRO380-Mod electricity meter
Official product image [S6]

Evidence scope

The retained official product route documents: INEPRO Group documents PRO380-Mod as a three-phase electricity meter. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Electricity Meter

Documented series: inepro PRO380-Mod electricity meter

INEPRO Group documents PRO380-Mod as a three-phase electricity meter. [S6]

Documented specifications for Electricity Meter
Service temperature-40°C [S9]
Current rating100A [S10]
Connection and mounting
PRO380-Mod is a three-phase 100 A meter in a four-module DIN enclosure. [S4]
Interface and certification
The page lists Modbus, MID or MIR, class B, two tariffs, a -40 to +70 C range and an S0 option. [S5]
  • inepro PRO380-Mod electricity meter [S6]

Selection fit: Interface, certification and environmental values remain model scoped; inepro Metering is the marketed brand. [S7]

Product range and documented series

INEPRO Group documents PRO380-Mod as a three-phase electricity meter. [S6]

  • inepro PRO380-Mod electricity meter [S6]Source note: inepro PRO380-Mod electricity meter

Procurement fit

The PRO380-Mod is a three-phase 100 A meter housed in a four-module DIN enclosure, suitable for standard distribution board mounting. It supports two tariffs and provides an S0 pulse output option, which is relevant for legacy energy management interfaces. The marketed brand is inepro Metering. Procurers should note that interface selection, certification path, and environmental ratings vary by configuration and must be confirmed against the specific model code at order entry. Installation, warranty terms, lead time, and after-sales support are not publicly documented in the available record and should be requested directly from the manufacturer.

Technical capabilities

The PRO380-Mod is specified as a three-phase meter with a 100 A current rating, packaged in a four-module DIN rail format. Documented capabilities include Modbus communication, MID or MIR certification, accuracy class B, two-tariff registration, an operating temperature range of -40 to +70 C, and an S0 output option. These characteristics are presented at the model level. The available record does not state voltage range, frequency, pulse constant, data refresh rate, or communication protocol variants. Any value beyond those listed should be treated as unconfirmed until verified against the manufacturer's current datasheet.

Markets and applications

The PRO380-Mod is positioned for three-phase fixed installations within the broader electricity meter category. The two-tariff capability, S0 pulse output, and -40 to +70 C operating window suggest use in sub-metering, light commercial premises, and industrial load monitoring where Modbus integration is required. MID or MIR certification options support billing and tenant metering applications in regulated European markets. The product is supplied from the Netherlands. Specific end-user segments, reference installations, and approved market registrations beyond the certifications listed are not publicly documented in the available record.

Evidence limitations

The documented record for INEPRO Group B.V. is limited to a single electricity meter entry, the inepro PRO380-Mod. The company background, founding date, staff count, and revenue are not publicly documented. Additional product series, accessories, and software platforms are not publicly documented. For the PRO380-Mod, voltage rating, frequency, pulse constant, communication baud rates, dimensions beyond the four-module form factor, weight, IP rating, installation manual revision, and warranty terms are not publicly documented. Procurers should confirm any figure not explicitly listed in the source record before specifying or ordering.

Editorial summary

INEPRO Group B.V. is a Netherlands based manufacturer located in Nieuw-Vennep, active in the electricity meter category. The company markets its metering products under the inepro Metering brand. Its documented product range centers on three-phase metering hardware for fixed installation. The single series referenced in current documentation is the inepro PRO380-Mod electricity meter. Specification scope, including interface, certification, and environmental characteristics, is defined at the individual model level rather than at the company level. The available record does not extend beyond the PRO380-Mod entry, and no additional product families, firmware platforms, or related accessories are listed.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to inepro PRO380-Mod electricity meter; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S8]Company-stated

Frequently asked questions

What Electricity Meter product is documented for INEPRO Group B.V.?

The retained product material names inepro PRO380-Mod electricity meter. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published connection and mounting should a buyer compare?

The cited product material records: PRO380-Mod is a three-phase 100 A meter in a four-module DIN enclosure. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published interface and certification should a buyer compare?

The cited product material records: The page lists Modbus, MID or MIR, class B, two tariffs, a -40 to +70 C range and an S0 option. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.