Evidence scope
The retained official product route documents: KRACHT GmbH is a Werdohl, Germany pump-technology company with a documented external gear-pump range. This dossier uses that cited route as the editorial scope. [S5]
The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S7]
Gear Pump
Documented series: KRACHT external gear transfer pumps, including modular KF gear pumps with stated 0.5–3,150 cm³/rev displacement, -40–200 °C range and maximum pressure up to 25 bar.
KRACHT GmbH is a Werdohl, Germany pump-technology company with a documented external gear-pump range. [S5]
| Material | cast iron [S8] |
|---|---|
| Service temperature | 200 °C [S9] |
| Pressure rating | 25 bar [S10] |
- KRACHT external gear transfer pumps, including modular KF gear pumps with stated 0.5–3,150 cm³/rev displacement, -40–200 °C range and maximum pressure up to 25 bar. [S4]
Selection fit: Use KRACHT's external gear-transfer range for chemical, plastics, marine, general fluid transfer, lubricating-oil, fuel or renewable-energy duties when its published materials and envelope fit; confirm liquid, viscosity, flow, pressure, seals, configuration, availability and lead time directly with KRACHT. [S6]
Product range and documented series
KRACHT GmbH is a Werdohl, Germany pump-technology company with a documented external gear-pump range. [S5]
- KRACHT external gear transfer pumps, including modular KF gear pumps with stated 0.5–3,150 cm³/rev displacement, -40–200 °C range and maximum pressure up to 25 bar. [S4]Source note: KRACHT gear pumps are external gear pumps; Gear pumps KF; Displacement: 0.5 … 3 150 cm³/rev; Temperature range: -40 … 200 °C; Maximum pressure: … 25 bar
Procurement fit
The external gear transfer range is specified for chemical, plastics, marine, general fluid transfer, lubricating-oil, fuel, and renewable-energy duties where the published materials and operating envelope match the service. Buyers should confirm liquid compatibility, viscosity, flow, pressure, seals, configuration, availability, and lead time directly with KRACHT prior to specification release. The published envelope defines the application limit.
Technical capabilities
The documented KF modular gear pumps are published with a stated displacement range of 0.5–3,150 cm³/rev. The documented operating temperature range is -40–200 °C. The maximum documented pressure is 25 bar. The catalogued material of construction is cast iron. Any performance figure beyond these documented values must be requested from KRACHT for the specific build.
Markets and applications
Documented application fields for the external gear transfer range include chemical processing, plastics handling, marine service, general fluid transfer, lubricating-oil circulation, fuel handling, and renewable-energy systems. Each application is bounded by the published displacement, temperature, pressure, and material envelope. Service within these fields requires confirmation of the specific liquid properties and duty profile with KRACHT.
Evidence limitations
The following common specification fields are not publicly documented: detailed dimensional drawings, weight, efficiency figures, noise levels, seal options, the full model code list beyond the KF series, certifications, lead times, pricing, and installed base references. Company history, employee count, revenue, and named customer references are also not publicly documented. All selections should be validated against the latest KRACHT published data.
Editorial summary
KRACHT GmbH is a German manufacturer based in Werdohl, classified under the documented category gear pump. The published product family consists of the KRACHT external gear transfer pumps, including the modular KF gear pumps. Catalogued units are documented in cast iron material of construction. The reference profile is limited to the data published for this family, and any extension of the envelope must be confirmed directly with KRACHT.
Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.
Not published in retained sources
These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.
Research coverage
Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.
- Corporate identity and Werdohl location are retained from KRACHT's official company page. External gear-transfer-pump evidence and its official KF product image are retained separately. Revenue, certifications, availability and delivery claims were not asserted. [S7]Company-stated
Frequently asked questions
What Gear Pump product is documented for KRACHT GmbH?
The retained product material names KRACHT external gear transfer pumps, including modular KF gear pumps with stated 0.5–3,150 cm³/rev displacement, -40–200 °C range and maximum pressure up to 25 bar. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]
Which common buying fields are not published in the retained sources?
The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S7]
Research notes
The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.
- [S1] GermanyGermany
- [S2] WerdohlWerdohl
- [S3] kracht.eukracht.eu
- [S4] KRACHT external gear transfer pumps, including modular KF gear pumps with stated 0.5–3,150 cm³/rev displacement, -40–200 °C range and maximum pressure up to 25 bar.KRACHT gear pumps are external gear pumps; Gear pumps KF; Displacement: 0.5 … 3 150 cm³/rev; Temperature range: -40 … 200 °C; Maximum pressure: … 25 bar
- [S5] KRACHT GmbH is a Werdohl, Germany pump-technology company with a documented external gear-pump range.KRACHT GmbH; Gear pumps
- [S6] Use KRACHT's external gear-transfer range for chemical, plastics, marine, general fluid transfer, lubricating-oil, fuel or renewable-energy duties when its published materials and envelope fit; confirm liquid, viscosity, flow, pressure, seals, configuration, availability and lead time directly with KRACHT.chemical and plastics industries; marine applications; general fluid transfer; lubricating oil technology; fuels; renewable energies; cast iron, spheroidal cast iron and stainless steel
- [S7] Corporate identity and Werdohl location are retained from KRACHT's official company page. External gear-transfer-pump evidence and its official KF product image are retained separately. Revenue, certifications, availability and delivery claims were not asserted.KRACHT GmbH; Gear pumps KF
- [S8] cast ironThe pump housings are made of cast iron, spheroidal cast iron and stainless steel, the gear parts are made from high-quality steel.
- [S9] 200 °CTemperature range: -40 … 200 °C
- [S10] 25 barMaximum pressure: … 25 bar
- [S11] Retained sourceGear pumps KF