Gear Pump manufacturer profile

LIQUIFLO Equipment Company

LIQUIFLO Equipment Company is a gear pump manufacturer based in Garwood, New Jersey, United States. [S2][S1]

Country
United States [S1]
City
Garwood, New Jersey [S2]
H12F Heavy Duty Industrial Gear Pump
Official product image [S11]

Evidence scope

The retained official product route documents: LIQUIFLO Equipment Company engineers, manufactures and markets sealed and mag-drive gear pumps from Garwood, New Jersey. This dossier uses that cited route as the editorial scope. [S5]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S7]

Gear Pump

Documented series: LIQUIFLO H12F heavy-duty industrial gear pumps in 316 stainless steel or Alloy-C, with sealed or mag-drive configurations.

LIQUIFLO Equipment Company engineers, manufactures and markets sealed and mag-drive gear pumps from Garwood, New Jersey. [S5]

Documented specifications for Gear Pump
Pressure rating225 PSI [S8]
Service temperature120°C [S9]
MaterialStainless Steel [S10]
  • LIQUIFLO H12F heavy-duty industrial gear pumps in 316 stainless steel or Alloy-C, with sealed or mag-drive configurations. [S4]

Selection fit: Use H12F for a high-alloy chemical-service gear-pump shortlist, then confirm chemical compatibility, materials, seal or mag-drive choice, viscosity, flow, pressure, availability and lead time directly with LIQUIFLO. [S6]

Product range and documented series

LIQUIFLO Equipment Company engineers, manufactures and markets sealed and mag-drive gear pumps from Garwood, New Jersey. [S5]

  • LIQUIFLO H12F heavy-duty industrial gear pumps in 316 stainless steel or Alloy-C, with sealed or mag-drive configurations. [S4]Source note: H12F Heavy Duty Industrial Gear Pump; 316 SS | Alloy-C; Sealed | Mag-Drive

Procurement fit

For a high-alloy chemical-service gear-pump shortlist, the LIQUIFLO H12F is a candidate. Engineers should specify the required wetted material as 316 stainless steel or Alloy-C based on chemical compatibility, and select between sealed or mag-drive configurations. Final selection requires confirmation of chemical compatibility, materials, seal or mag-drive choice, viscosity, flow, pressure, availability and lead time directly with LIQUIFLO, as these operating parameters must be validated against the specific H12F variant under consideration.

Technical capabilities

The H12F series is defined as a heavy-duty industrial gear pump. Documented configuration options include 316 stainless steel or Alloy-C wetted material constructions, and sealed or mag-drive sealing arrangements. Beyond these material and sealing distinctions, the available specification data does not document detailed performance envelopes, displacement volumes, maximum pressure ratings, temperature limits, or viscosity ranges. Engineers evaluating this pump must obtain these parameters from LIQUIFLO for the specific H12F variant selected for the intended service.

Markets and applications

The H12F is positioned for high-alloy chemical-service duty, reflecting the 316 stainless steel and Alloy-C material options that support corrosive and aggressive media handling. The mag-drive configuration supports applications where leakage control is critical, while the sealed configuration suits services where conventional sealing is acceptable. Specific end-market verticals, typical fluid chemistries handled, and installed-base references are not publicly documented for this manufacturer in the available data.

Evidence limitations

Detailed performance specifications including flow range, pressure rating, displacement, viscosity limits, and temperature range are not publicly documented. Certification status, quality system registrations, and agency approvals such as ATEX or specific chemical service listings are not publicly documented. Lead times, pricing, distributor network, and authorized service partners are not publicly documented. Customer references, installed base data, and application case histories are not publicly documented.

Editorial summary

LIQUIFLO Equipment Company is a United States-based manufacturer with a documented product category of gear pumps, located in Garwood, New Jersey. The manufacturer's documented product line is centered on the LIQUIFLO H12F heavy-duty industrial gear pumps, offered in 316 stainless steel or Alloy-C wetted material constructions, with either sealed or mag-drive configuration options. No additional product categories are documented in the available specification data.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S7]
  • Certifications [S7]
  • Availability or stock [S7]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • LIQUIFLO is represented as a division of Picut Industries, not an independently verified legal entity. Its Garwood business facts, H12F model evidence and official product image are retained from first-party pages. Revenue, certifications, availability and delivery claims were not asserted. [S7]Company-stated

Frequently asked questions

What Gear Pump product is documented for LIQUIFLO Equipment Company?

The retained product material names LIQUIFLO H12F heavy-duty industrial gear pumps in 316 stainless steel or Alloy-C, with sealed or mag-drive configurations. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S7]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.