Multifunction Power Meter manufacturer profile

LUMEL S.A.

LUMEL S.A. is a multifunction power meter manufacturer based in Zielona Gora, Poland. [S2][S1]

Country
Poland [S1]
City
Zielona Gora [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Current and topology
N43 supports direct current measurement to 63 A or indirect CT measurement in three-phase three- or four-wire systems. [S4]
Quantities and protocol
It reports voltage, current, active, reactive and apparent power and energy, power factor, frequency and THD with RS-485 Modbus. [S5]
LUMEL N43 rail-mounted three-phase power-network meter
Official product image [S6]

Evidence scope

The retained official product route documents: LUMEL documents N43 as a rail-mounted three-phase power-network meter. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S7]

Multifunction Power Meter

Documented specifications for Multifunction Power Meter
Published product factLUMEL N43 rail-mounted three-phase power-network meter [S6]

Product range and documented series

LUMEL documents N43 as a rail-mounted three-phase power-network meter. [S6]

  • LUMEL N43 rail-mounted three-phase power-network meter [S6]Source note: LUMEL N43 rail-mounted three-phase power-network meter

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S7]
  • Availability or stock [S7]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to LUMEL N43 rail-mounted three-phase power-network meter; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S7]Company-stated

Frequently asked questions

What Multifunction Power Meter product is documented for LUMEL S.A.?

The retained product material names LUMEL N43 rail-mounted three-phase power-network meter. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published current and topology should a buyer compare?

The cited product material records: N43 supports direct current measurement to 63 A or indirect CT measurement in three-phase three- or four-wire systems. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published quantities and protocol should a buyer compare?

The cited product material records: It reports voltage, current, active, reactive and apparent power and energy, power factor, frequency and THD with RS-485 Modbus. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S7]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.