Solenoid Valve manufacturer profile

Magnatrol Valve Corporation

Magnatrol Valve Corporation is a solenoid valve manufacturer based in Hawthorne, United States. [S2][S1]

Country
United States [S1]
City
Hawthorne [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Published Type A size range
The cited Type A page lists normally closed full-port bronze valves in 1/2-3 inch pipe sizes. [S4]
Published Type A limits
The cited page limits its listed temperature and static-pressure values to 212 F and 300 psi, except for separately listed 500 psi valves. [S5]
Type 'A' Full Port Bronze Solenoid Valve
Official product image [S6]

Evidence scope

The retained official product route documents: Magnatrol documents Type A as a full-port bronze solenoid valve. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Solenoid Valve

Documented series: Magnatrol Type A full-port bronze solenoid valves.

Magnatrol documents Type A as a full-port bronze solenoid valve. [S6]

Documented specifications for Solenoid Valve
Pressure rating300 PSI [S9]
MaterialCast Iron [S10]
Published Type A size range
The cited Type A page lists normally closed full-port bronze valves in 1/2-3 inch pipe sizes. [S4]
Published Type A limits
The cited page limits its listed temperature and static-pressure values to 212 F and 300 psi, except for separately listed 500 psi valves. [S5]
  • Magnatrol Type A full-port bronze solenoid valves. [S6]

Selection fit: Use this route for full-port bronze solenoid-valve comparisons, then confirm pipe size, normal state, temperature and pressure for the selected valve. [S7]

Product range and documented series

Magnatrol documents Type A as a full-port bronze solenoid valve. [S6]

  • Magnatrol Type A full-port bronze solenoid valves. [S6]Source note: Type 'A' Full Port Bronze Solenoid Valve

Procurement fit

The Type A series is appropriate for full-port bronze solenoid valve comparisons. During selection, pipe size, normal state, temperature, and static pressure should each be confirmed against the application requirements. The cited Type A page lists normally closed configurations in pipe sizes 1/2 to 3 inch. Engineers evaluating full-port bronze solenoid valves should treat this entry as a starting reference and verify all operating parameters before issuing a purchase order.

Technical capabilities

The published Type A documentation describes normally closed full-port bronze valves. Material is listed as stainless steel. The cited page limits listed temperature to 212 F and static pressure to 300 psi, with separately listed 500 psi valves noted as exceptions. Pipe size range covered by the Type A citation is 1/2 to 3 inch. No further technical characteristics are documented within the available record.

Markets and applications

The documented record does not specify target markets or application sectors for the Magnatrol Type A series. Suitability should be inferred from the published pressure and temperature limits of 300 psi and 212 F, with the 500 psi valves applicable where higher static pressure is required. End-use industries, certification marks, and representative application examples are not publicly documented in the cited specification sheet.

Evidence limitations

Company size, founding year, certifications, and customer references are not publicly documented. Material of construction is listed as stainless steel while the series is described as full-port bronze, an inconsistency in the source that should be clarified directly with the manufacturer. Voltage ratings, coil classes, response times, NEMA or enclosure ratings, and CV values are not publicly documented. Body pattern, end connections, and third party agency approvals are not publicly documented.

Editorial summary

Magnatrol Valve Corporation is a solenoid valve manufacturer located in Hawthorne, United States. The documented product line consists of the Magnatrol Type A full-port bronze solenoid valves. The company appears in this directory under a single category, solenoid valve, with no additional product breadth documented for review here. Specifications discussed below are limited to the Type A family as currently published by the manufacturer.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Production capacity [S8]
  • Certifications [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Magnatrol corporate context comes from its official About route. Product facts and the visual are limited to Type A; no unquoted availability, certification, capacity or commercial claims are asserted. [S8]Company-stated

Frequently asked questions

What Solenoid Valve product is documented for Magnatrol Valve Corporation?

The retained product material names Magnatrol Type A full-port bronze solenoid valves. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published type a size range should a buyer compare?

The cited product material records: The cited Type A page lists normally closed full-port bronze valves in 1/2-3 inch pipe sizes. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published type a limits should a buyer compare?

The cited product material records: The cited page limits its listed temperature and static-pressure values to 212 F and 300 psi, except for separately listed 500 psi valves. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Production capacity, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.