Steam Trap manufacturer profile

Mepco LLC

Mepco LLC is a steam trap manufacturer based in Grand Rapids, Michigan, United States. [S2][S1]

Country
United States [S1]
City
Grand Rapids, Michigan [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Published duty
Series 30 is documented as a single-inlet/single-outlet float-and-thermostatic trap for high-capacity steam heating and steam-process equipment. [S4]
Published range
The cited Series 30 route lists ten models, 1,500-150,000 lb/h condensate capacity and pressures up to 125 psig. [S5]
High Capacity Float & Thermostatic Traps
Official product image [S6]

Evidence scope

The retained official product route documents: Mepco documents Series 30 as a high-capacity float-and-thermostatic steam-trap range. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Steam Trap

Documented series: Series 30 high-capacity float-and-thermostatic steam traps.

Mepco documents Series 30 as a high-capacity float-and-thermostatic steam-trap range. [S6]

Documented specifications for Steam Trap
Materialstainless steel [S9]
Published duty
Series 30 is documented as a single-inlet/single-outlet float-and-thermostatic trap for high-capacity steam heating and steam-process equipment. [S4]
Published range
The cited Series 30 route lists ten models, 1,500-150,000 lb/h condensate capacity and pressures up to 125 psig. [S5]
  • Series 30 high-capacity float-and-thermostatic steam traps. [S6]

Selection fit: Use Series 30 for high-capacity float-and-thermostatic steam-trap comparisons, then confirm the selected model, condensate load, pressure and connection with Mepco. [S7]

Product range and documented series

Mepco documents Series 30 as a high-capacity float-and-thermostatic steam-trap range. [S6]

  • Series 30 high-capacity float-and-thermostatic steam traps. [S6]Source note: High Capacity Float & Thermostatic Traps

Procurement fit

The Series 30 is documented for high-capacity float-and-thermostatic steam-trap comparisons within the manufacturer's published range. Per the procurement guidance, the specifying engineer should select a model, then confirm the chosen model code, the condensate load, the operating pressure, and the connection specification directly with Mepco. The cited source is the Series 30 product route.

Technical capabilities

The Series 30 family is documented as a single-inlet/single-outlet float-and-thermostatic steam trap. The published route lists ten models within the series, with a documented condensate capacity range of 1,500-150,000 lb/h and a maximum operating pressure rating of 125 psig. Individual model capacity tables, materials of construction, and connection details are not publicly documented.

Markets and applications

The published duty of the Series 30 covers high-capacity steam heating service and steam-process equipment. Application scope as stated in the documentation is limited to these two service classes, with the float-and-thermostatic mechanism suited to continuous condensate discharge at varying loads. Specific industry verticals, reference installations, and case histories are not publicly documented.

Evidence limitations

The following items are not publicly documented in the cited record: body and trim materials of construction, end connection types and sizes, model-by-model capacity and pressure data, PMO versus TMA versus PMA ratings, hydrostatic test pressures, physical dimensions and weight, third-party certifications such as ASME or CRN, pricing, lead times, warranty terms, and authorized representative network. Confirm each parameter with Mepco before specification release.

Editorial summary

Mepco LLC is a United States manufacturer located in Grand Rapids, Michigan, and is documented in the steam-trap category. The published product line is the Series 30 high-capacity float-and-thermostatic steam traps. The available reference record covers the Series 30 family only; no other product series, model codes, or categories are listed in the documented facts for this manufacturer.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Mepco corporate context is retained from its official contact route. Series 30 facts and its page-bound WebP visual are limited to the cited product route. The source response omitted a Content-Type header, but the retained file bytes validate as WebP; media must be revalidated before any future asset acquisition. [S8]Company-stated

Frequently asked questions

What Steam Trap product is documented for Mepco LLC?

The retained product material names Series 30 high-capacity float-and-thermostatic steam traps. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published duty should a buyer compare?

The cited product material records: Series 30 is documented as a single-inlet/single-outlet float-and-thermostatic trap for high-capacity steam heating and steam-process equipment. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published range should a buyer compare?

The cited product material records: The cited Series 30 route lists ten models, 1,500-150,000 lb/h condensate capacity and pressures up to 125 psig. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.