Three-Phase Asynchronous Motor manufacturer profile

M.T. Motori Elettrici S.r.l.

M.T. Motori Elettrici S.r.l. is a three-phase asynchronous motor manufacturer based in San Giovanni in Persiceto, Italy. [S2][S1]

Country
Italy [S1]
City
San Giovanni in Persiceto [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Frame and power
The range spans frame sizes 55–200 and 0.05–37 kW. [S4]
Poles and protection
The page lists 2, 4, 6 and 8 poles, IE1 through IE3 efficiency, Class F insulation and IP55 protection. [S5]
M.T. Motori Elettrici TN three-phase asynchronous motors
Official product image [S6]

Evidence scope

The retained official product route documents: M.T. Motori Elettrici documents TN as a standard three-phase asynchronous-motor family. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Three Phase Asynchronous Motor

Documented series: M.T. Motori Elettrici TN three-phase asynchronous motors

M.T. Motori Elettrici documents TN as a standard three-phase asynchronous-motor family. [S6]

Documented specifications for Three Phase Asynchronous Motor
Ingress protectionIP 55 [S9]
Efficiency classIE1 [S10]
StandardIEC 60085 [S11]
Frame and power
The range spans frame sizes 55–200 and 0.05–37 kW. [S4]
Poles and protection
The page lists 2, 4, 6 and 8 poles, IE1 through IE3 efficiency, Class F insulation and IP55 protection. [S5]
  • M.T. Motori Elettrici TN three-phase asynchronous motors [S6]

Selection fit: Power, efficiency, pole count, mounting, voltage and frequency remain type-specific. [S7]

Product range and documented series

M.T. Motori Elettrici documents TN as a standard three-phase asynchronous-motor family. [S6]

  • M.T. Motori Elettrici TN three-phase asynchronous motors [S6]Source note: M.T. Motori Elettrici TN three-phase asynchronous motors

Procurement fit

Selection parameters for the TN series are type-specific, including power rating, efficiency class, pole count, mounting configuration, voltage and supply frequency. The frame size range of 55 to 200 with outputs from 0.05 to 37 kW defines the available envelope. Final suitability must be confirmed against the specific variant datasheet, as standardized cross-references are not provided. Buyers should request detailed type designations covering all six parameters before issuing enquiries.

Technical capabilities

The TN range covers 2, 4, 6 and 8 pole configurations with efficiency classes IE1 through IE3. Insulation is Class F per IEC 60085, and the enclosure is rated IP55. Frame sizes extend from 55 to 200, supporting power outputs between 0.05 and 37 kW. Voltage, frequency and mounting arrangement must be specified per order, as these parameters vary across the series and are not consolidated in the documented range.

Markets and applications

Documented categories indicate industrial applications for three-phase asynchronous motors in the TN series. Specific end-use sectors, target industries and reference installations are not publicly documented. The general technical envelope suggests suitability for standard industrial drive applications within the stated power and frame size range, though application-specific qualification remains the integrator's responsibility. No certified sector approvals or industry-specific validations are recorded in the available facts.

Evidence limitations

Headquarters city is documented as San Giovanni in Persiceto, Italy; however, company size, founding date, production capacity, certifications, customer references and installed base are not publicly documented. Frame size, power, pole count, efficiency class, insulation class and ingress protection are stated; specific shaft dimensions, torque curves, noise levels, voltage options, frequency variants, detailed mounting configurations, ambient temperature ratings and duty cycle declarations are not publicly documented. Approvals beyond IEC 60085 are not publicly documented.

Editorial summary

M.T. Motori Elettrici S.r.l. is an Italian manufacturer located in San Giovanni in Persiceto, producing the TN series of three-phase asynchronous motors. The product line conforms to IEC 60085 for insulation classification and is offered with IP55 ingress protection. Frame sizes span 55 to 200, with documented power outputs from 0.05 to 37 kW. Efficiency ratings cover IE1 through IE3, and the range includes 2, 4, 6 and 8 pole variants. Specific configuration details remain type-dependent.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to M.T. Motori Elettrici TN three-phase asynchronous motors; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S8]Company-stated

Frequently asked questions

What Three-Phase Asynchronous Motor product is documented for M.T. Motori Elettrici S.r.l.?

The retained product material names M.T. Motori Elettrici TN three-phase asynchronous motors. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published frame and power should a buyer compare?

The cited product material records: The range spans frame sizes 55–200 and 0.05–37 kW. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published poles and protection should a buyer compare?

The cited product material records: The page lists 2, 4, 6 and 8 poles, IE1 through IE3 efficiency, Class F insulation and IP55 protection. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.