Hydraulic Accumulator manufacturer profile

Parker Hannifin Corporation

Parker Hannifin Corporation is a hydraulic accumulator manufacturer based in Des Plaines, United States. [S2][S1]

Country
United States [S1]
City
Des Plaines [S2]

Evidence scope

The retained official product route documents: Parker's Accumulator Central catalog covers piston, bladder and diaphragm accumulator documentation. This dossier uses that cited route as the editorial scope. [S10]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S17]

Accumulator

Documented series: Series A threaded piston, ACP crimped piston, BA bladder and AD diaphragm accumulators

Parker's Accumulator Central catalog covers piston, bladder and diaphragm accumulator documentation. [S10]

Documented specifications for Accumulator
Pressure rating1 bar [S18]
  • Series A threaded piston, ACP crimped piston, BA bladder and AD diaphragm accumulators [S4]
  • Parker mobile cylinders: single- and double-acting telescopic cylinders plus welded rod cylinders; the published bore ranges are 3.25–48 in for telescopic and 1.5–30 in for welded rod cylinders. [S5]
  • Parker hydraulic-motor routes include F1, F11 and F12 axial-piston fixed motors plus Torqmotor light-, medium- and heavy-duty series including TE, TG and TGK. [S6]
  • Compact Power Central configurators and drawings for electro-hydraulic actuators plus 108, 165 and 550 Series compact hydraulic power units. [S7]
  • P1M Series mobile open-circuit medium-pressure axial-piston pumps with a compact envelope and modular control options. [S8]
  • Industrial directional-control, directional-seat and sandwich-valve routes. The published directional-control selection includes D1V up to 5,000 psi and 20 gpm, D31 up to 5,000 psi and 45 gpm, and D81 up to 5,000 psi and 160 gpm. [S9]

Selection fit: Use Parker's documented accumulator families and its selection-and-application guide to narrow the piston, bladder or diaphragm route; confirm the chosen series and duty point with Parker before ordering. [S11]

Product range and documented series

Parker's Accumulator Central catalog covers piston, bladder and diaphragm accumulator documentation. [S10]

  • Series A threaded piston, ACP crimped piston, BA bladder and AD diaphragm accumulators [S4]Source note: Series A Threaded Piston; Series ACP Crimped Piston; Series BA Bladder; Series AD Diaphragm Accumulators
  • Parker mobile cylinders: single- and double-acting telescopic cylinders plus welded rod cylinders; the published bore ranges are 3.25–48 in for telescopic and 1.5–30 in for welded rod cylinders. [S5]Source note: Single Acting Telescopic: Bore 3.25–48 in; Welded Rod: Bore 1.5–30 in; Double Acting Telescopic: Bore 3.25–48 in
  • Parker hydraulic-motor routes include F1, F11 and F12 axial-piston fixed motors plus Torqmotor light-, medium- and heavy-duty series including TE, TG and TGK. [S6]Source note: Axial Piston Fixed Motors - Series F1; Series Small Frame F11; Series Large Frame F12; Light Duty Motor - Torqmotor™ - Series TE; Medium Duty Motor - Torqmotor™ - Series TG; Heavy Duty Motor – Torqmotor™ TGK Series
  • Compact Power Central configurators and drawings for electro-hydraulic actuators plus 108, 165 and 550 Series compact hydraulic power units. [S7]Source note: Compact Hydraulic Power Unit - 108 Series; Compact Hydraulic Power Unit - 165 Series; Compact Hydraulic Power Unit - 550 Series
  • P1M Series mobile open-circuit medium-pressure axial-piston pumps with a compact envelope and modular control options. [S8]Source note: P1M Series Mobile Open Circuit Medium Pressure Axial Piston Pump; Compact package; Extensive/modular control options
  • Industrial directional-control, directional-seat and sandwich-valve routes. The published directional-control selection includes D1V up to 5,000 psi and 20 gpm, D31 up to 5,000 psi and 45 gpm, and D81 up to 5,000 psi and 160 gpm. [S9]Source note: D1V: Max Pressure 5000 PSI; Max Flow 20 GPM; D31: 5000 PSI; 45 GPM; D81: 5000 PSI; 160 GPM; Seat Valves; Sandwich Valves

Procurement fit

Selection should begin with Parker's documented accumulator families and its selection-and-application guide to discriminate between the piston, bladder, and diaphragm routes before committing to a specific series. For mobile-cylinder applications, Parker's published page references refuse, mining, truck, material-handling, and oil-and-gas markets. The buyer is advised to confirm the chosen series, duty cycle, bore, stroke, pressure, mounting, seal material, availability, and lead time directly with Parker prior to order release.

Technical capabilities

The documented accumulator range comprises four named series: the Series A threaded piston accumulator, the ACP crimped piston accumulator, the BA bladder accumulator, and the AD diaphragm accumulator. Cast Iron is the only material explicitly listed across these families in the available documentation. Detailed pressure ratings, volumetric capacities, port configurations, and temperature envelopes are not publicly documented within the supplied facts.

Markets and applications

The only application markets enumerated in the documented material are those listed on Parker's published mobile-cylinder page, namely refuse, mining, truck, material-handling, and oil-and-gas. The supplied facts do not assign specific markets to the Series A threaded piston, ACP crimped piston, BA bladder, or AD diaphragm families individually. Any expansion of the application scope is not publicly documented and should be confirmed with Parker.

Evidence limitations

Several procurement fields that engineers typically require are not publicly documented in the supplied material, including detailed pressure ratings, bladder and diaphragm sizes, port options, seal compounds, temperature limits, cycle-life data, certification listings, lead times, and pricing. Manufacturing site information for each specific series and any sub-supplier locations are likewise not publicly documented. Buyers should request these data points from Parker prior to specification.

Editorial summary

Parker Hannifin Corporation, headquartered in Des Plaines, United States, is documented in this directory under the accumulator category. The published scope covers four distinct accumulator families: the Series A threaded piston, ACP crimped piston, BA bladder, and AD diaphragm accumulators. Body material identified in the available documentation is Cast Iron. Other structural and performance attributes are not publicly documented and must be verified directly with the manufacturer.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate catalog provenance and the United States division address are retained from Parker's official catalog pages. Accumulator, Hydraulic Cylinder, Hydraulic Motor, Hydraulic Power Unit, Hydraulic Pump and Hydraulic Valve membership evidence is limited to named official product families and product pages. Revenue, certifications and lead time were not asserted. [S17]Company-stated

Frequently asked questions

What Hydraulic Accumulator product is documented for Parker Hannifin Corporation?

The retained product material names Series A threaded piston, ACP crimped piston, BA bladder and AD diaphragm accumulators. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S17]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.