Cable Gland manufacturer profile

PFLITSCH GmbH & Co. KG

PFLITSCH GmbH & Co. KG is a cable gland manufacturer based in Hückeswagen, Germany. [S2][S1]

Country
Germany [S1]
City
Hückeswagen [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Protection
Polyamide gland with IP68 up to 15 bar, IP69 and Type 4X protection. [S4]
Insert temperature
TPE insert: -40 to +130 °C; silicone insert: -55 to +200 °C. [S5]
blueglobe cable gland
Official product image [S11]

Evidence scope

The retained official product route documents: PFLITSCH documents blueglobe Plastic as a cable-gland series with multiple sealing-insert options. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Cable Gland

Documented series: blueglobe Plastic cable-gland series.

PFLITSCH documents blueglobe Plastic as a cable-gland series with multiple sealing-insert options. [S6]

Documented specifications for Cable Gland
StandardEN 62444 [S9]
Service temperature40 °C [S10]
Protection
Polyamide gland with IP68 up to 15 bar, IP69 and Type 4X protection. [S4]
Insert temperature
TPE insert: -40 to +130 °C; silicone insert: -55 to +200 °C. [S5]
  • blueglobe Plastic cable-gland series. [S6]

Selection fit: Compare blueglobe Plastic where its cited polyamide construction, protection ratings and insert temperature range fit; confirm the final insert, thread and cable configuration with PFLITSCH. [S7]

Product range and documented series

PFLITSCH documents blueglobe Plastic as a cable-gland series with multiple sealing-insert options. [S6]

  • blueglobe Plastic cable-gland series. [S6]Source note: blueglobe Plastic

Procurement fit

The blueglobe Plastic cable-gland series is documented for applications requiring EN 62444 compliance and IP 68 ingress protection, with the polyamide gland body further rated to IP68 up to 15 bar, IP69 and Type 4X protection. Procurement evaluation should compare the cited polyamide construction, protection ratings and insert temperature windows against the project specification. Final selection of insert material, thread form and cable diameter range must be confirmed directly with PFLITSCH, as these parameters are not fully enumerated in the documented facts.

Technical capabilities

The blueglobe Plastic cable-gland series is documented at IP 68 to EN 62444. The polyamide gland is specified for IP68 up to 15 bar, IP69 and Type 4X protection. A stainless steel component is listed alongside the polyamide body. Two insert options are documented: a TPE insert rated from -40 to +130 °C and a silicone insert rated from -55 to +200 °C. The service temperature is stated as 40 °C. These values are reproduced verbatim from the source and should be cross-checked against the current PFLITSCH data sheet before specification release.

Markets and applications

PFLITSCH GmbH & Co. KG is documented solely within the cable-gland category, with the blueglobe Plastic cable-gland series as the named offering. The combination of EN 62444 conformance, IP 68 rating, polyamide gland body providing IP68 up to 15 bar, IP69 and Type 4X protection, and the two insert temperature windows implies applicability to industrial enclosures, outdoor installations and washdown environments. Specific end markets, named industries and reference installations are not publicly documented, and any such application context should be requested directly from the manufacturer.

Evidence limitations

Several common buying fields are not publicly documented, including thread sizes and types, clamping ranges, color variants, mechanical impact ratings, fire classifications, ATEX or IECEx approvals, raw-material origin, lead times, warranty terms and the authorised distributor network. Customer references, installed-base figures and quality-accreditation listings are likewise absent. The single service temperature value of 40 °C is reproduced exactly as written; its relationship to the -40 to +130 °C and -55 to +200 °C insert windows is not explained in the source and warrants clarification with PFLITSCH.

Editorial summary

PFLITSCH GmbH & Co. KG is documented as a German manufacturer based in Hückeswagen, listed under the cable-gland category. The documented product range centres on the blueglobe Plastic cable-gland series. Design conformity is stated against EN 62444, with a published ingress protection of IP 68. Construction is specified as a stainless steel element combined with a polyamide gland body, indicating a mixed-material entry device. The service temperature is listed as 40 °C. No additional series, sizes or sub-families are documented beyond the blueglobe Plastic designation.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Production capacity [S8]
  • Certifications [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • PFLITSCH corporate context is retained from its legal page. Product facts and the visual are limited to blueglobe Plastic; no revenue, capacity, availability, certification or broader product-line claim is asserted. [S8]Company-stated

Frequently asked questions

What Cable Gland product is documented for PFLITSCH GmbH & Co. KG?

The retained product material names blueglobe Plastic cable-gland series. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published protection should a buyer compare?

The cited product material records: Polyamide gland with IP68 up to 15 bar, IP69 and Type 4X protection. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published insert temperature should a buyer compare?

The cited product material records: TPE insert: -40 to +130 °C; silicone insert: -55 to +200 °C. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Production capacity, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.