Submersible Pump manufacturer profile

PLEUGER Industries GmbH

PLEUGER Industries GmbH is a submersible pump manufacturer based in Hamburg, Germany. [S2][S1]

Country
Germany [S1]
City
Hamburg [S2]
Deep Well / Caisson Pumps
Official product image [S4]

Evidence scope

The retained official product route documents: PLEUGER documents Deep Well and Caisson submersible pump units. This dossier uses that cited route as the editorial scope. [S4]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S6]

Submersible Pump

Documented series: Deep Well and Caisson submersible pump units with single-stage and multistage centrifugal pump options.

PLEUGER documents Deep Well and Caisson submersible pump units. [S4]

Documented specifications for Submersible Pump
Flow rate1 m³/h [S7]
Service temperature85°C [S8]
Materialstainless steel [S9]
Pressure rating10 bar [S10]
  • Deep Well and Caisson submersible pump units with single-stage and multistage centrifugal pump options. [S4]

Selection fit: Evaluate this route for published deep-well or caisson duties; confirm depth, head, water chemistry, motor, control and installation requirements with PLEUGER. [S5]

Product range and documented series

PLEUGER documents Deep Well and Caisson submersible pump units. [S4]

  • Deep Well and Caisson submersible pump units with single-stage and multistage centrifugal pump options. [S4]Source note: Deep Well / Caisson Pumps

Procurement fit

The documented procurement guidance is to evaluate this route for published deep-well or caisson duties, then confirm depth, head, water chemistry, motor, control and installation requirements with PLEUGER. Material of construction is documented as stainless steel, supply length as 2 m, and ingress protection as IP68. Common buying fields such as flow range, rated head, motor rating, voltage, cable specification, and efficiency class are not publicly documented in the source material.

Technical capabilities

The submersible pump range covers Deep Well and Caisson configurations, each available as single-stage and multistage centrifugal variants. Construction material is documented as stainless steel. Supply length is documented at 2 m. The documented ingress protection rating is IP68. Specific flow capacities, total head figures, motor power, voltage and frequency, rotational speed, and efficiency classification are not publicly documented. Model-level performance curves, hydraulic material grade, and cable specification are likewise not publicly documented.

Markets and applications

Documented application scope covers deep well and caisson submersible pump duties in single-stage and multistage centrifugal variants. Stainless steel construction combined with IP68 ingress protection indicates suitability for submerged service in water-handling installations. The documented procurement note instructs buyers to confirm depth, head, water chemistry, motor, control and installation requirements with PLEUGER. Specific end-use sectors, installed base figures, geographic deployment, and reference installations are not publicly documented.

Evidence limitations

The following commonly requested specification fields are not publicly documented in the source material: detailed model codes within the Deep Well and Caisson series, flow rate, total head, motor power, voltage and frequency, efficiency class, hydraulic material grade, cable specification, starter or control panel details, unit weight, maximum submergence depth, and third-party certifications. Company history, founding year, employee count, annual turnover, and customer references are not publicly documented.

Editorial summary

PLEUGER Industries GmbH is documented as a German manufacturer based in Hamburg, active in the submersible pump category. The product range is described as Deep Well and Caisson submersible pump units, offered in single-stage and multistage centrifugal pump configurations. Construction material is documented as stainless steel. The supply length is documented at 2 m. Ingress protection is documented as IP68. The supplied facts should be treated as a category-level summary, not a model-level datasheet.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S6]
  • Certifications [S6]
  • Availability or stock [S6]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • PLEUGER Industries GmbH identity and Hamburg location are retained from its official contact page. The Deep Well membership and official product image are separately scoped to the named product page. Revenue, certification, stock, service and delivery claims were not asserted. [S6]Company-stated

Frequently asked questions

What Submersible Pump product is documented for PLEUGER Industries GmbH?

The retained product material names Deep Well and Caisson submersible pump units with single-stage and multistage centrifugal pump options. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S6]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.