Switching Power Supply manufacturer profile

PULS GmbH

PULS GmbH is a switching power supply manufacturer based in Germany. [S1]

Country
Germany [S1]
PULS CP10.241 DIN-rail industrial power supply
Official product image [S7]

Evidence scope

The retained official product route documents: PULS GmbH manufactures DIN-rail industrial power supplies such as CP10.241 for automation and control panels. This dossier uses that cited route as the editorial scope. [S4]

Switching Power Supply

Documented series: PULS CP10.241 240 W 24 V 10 A 1-phase DIN-rail power supply

PULS GmbH manufactures DIN-rail industrial power supplies such as CP10.241 for automation and control panels. [S4]

Documented specifications for Switching Power Supply
Power range40 to 960W [S5]
Voltage range100-240 V [S6]
  • PULS CP10.241 240 W 24 V 10 A 1-phase DIN-rail power supply [S3]

Selection fit: 1-phase DIN-rail AC-DC switching power supplies for 24 V control loads needing a named CP10.241 SKU with official evidence. [S3]

Product range and documented series

PULS GmbH manufactures DIN-rail industrial power supplies such as CP10.241 for automation and control panels. [S4]

  • PULS CP10.241 240 W 24 V 10 A 1-phase DIN-rail power supply [S3]Source note: PULS CP10.241 | 240W, 24V, 10A 1-phase DIN rail power supply The store will not work correctly when cookies are disabled. JavaScript seems to be disabled in your browse

Procurement fit

The CP10.241 is documented as a fit for 1-phase DIN-rail AC-DC switching power supplies intended for 24 V control loads where a named CP10.241 SKU with official evidence is required at the point of specification. Buyers should verify input voltage range, efficiency, and approval set against their project requirements before release, as those parameters are not publicly documented in the supplied record.

Technical capabilities

The CP10.241 is specified as a 1-phase DIN-rail switching power supply delivering 240 W at 24 V and 10 A. The documented service temperature rating is -25 °C, indicating a cold-start lower limit only; any upper operating temperature is not publicly documented. Compliance is recorded against IEC 60950. Other electrical performance data, including ripple, hold-up time, and derating curves, are not publicly documented in the supplied record.

Markets and applications

Based on the documented procurement fit, the CP10.241 is positioned for 24 V control loads in industrial cabinets fed from single-phase AC mains. The IEC 60950 standard designation is consistent with legacy information technology equipment installations, though current certification status under subsequent standards is not publicly documented. No specific end-market verticals, geographies, or reference installations are recorded in the supplied data.

Evidence limitations

The following common buying fields are not publicly documented in the supplied record: input voltage range, efficiency at full load, MTBF, protection features (overload, short circuit, overvoltage), output voltage adjustment range, parallel operation capability, dimensions, weight, terminal type, and current certification status beyond IEC 60950. Additional CP-series models and corporate details are likewise not publicly documented.

Editorial summary

PULS GmbH is a Germany-based manufacturer documented in this directory under the switching power supply category. The single catalog entry identified for specification purposes is the CP10.241, a 1-phase DIN-rail unit rated at 240 W with a 24 V, 10 A output. Listings for additional product lines, subsidiaries, and corporate background are not publicly documented in the supplied record.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Frequently asked questions

What Switching Power Supply product is documented for PULS GmbH?

The retained product material names PULS CP10.241 240 W 24 V 10 A 1-phase DIN-rail power supply. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S3]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.