Safety Relief Valve manufacturer profile

Seetru Limited

Seetru Limited is a safety relief valve manufacturer based in Bristol, United Kingdom. [S2][S1]

Country
United Kingdom [S1]
City
Bristol [S2]
Website
seetru.com

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Published sizes
The cited LGS route lists DN15–DN65 and 1/2 to 2 1/2 BSP female sizes. [S4]
Published pressure range
The cited LGS route lists a 0.2–24 bar pressure range. [S5]
LGS safety relief valves
Official product image [S6]

Evidence scope

The retained official product route documents: Seetru documents LGS as a multi-purpose safety relief valve. This dossier uses that cited route as the editorial scope. [S7]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S9]

Safety Relief Valve

Documented series: LGS multi-purpose safety relief valves.

Seetru documents LGS as a multi-purpose safety relief valve. [S7]

Documented specifications for Safety Relief Valve
Materialstainless steel [S10]
Pressure rating24 bar [S11]
Service temperature-60°C [S12]
Published sizes
The cited LGS route lists DN15–DN65 and 1/2 to 2 1/2 BSP female sizes. [S4]
Published pressure range
The cited LGS route lists a 0.2–24 bar pressure range. [S5]
  • LGS multi-purpose safety relief valves. [S6]

Selection fit: Start with LGS only if the cited connection and 0.2–24 bar range fit the duty. Confirm medium, set pressure, discharge, material and final selection with Seetru. [S8]

Product range and documented series

Seetru documents LGS as a multi-purpose safety relief valve. [S7]

  • LGS multi-purpose safety relief valves. [S6]Source note: LGS safety relief valves

Procurement fit

The documented procurement guidance states to start with LGS only if the cited connection and 0.2–24 bar range fit the duty. Medium, set pressure, discharge, material, and final selection are to be confirmed with Seetru. The phrase cited connection refers to DN15–DN65 and 1/2 to 2 1/2 BSP female sizes as published for the LGS route. Buyers should not assume suitability outside that envelope without manufacturer confirmation, and should not infer cost, lead time, or commercial terms from the directory entry.

Technical capabilities

The LGS multi-purpose safety relief valve is documented with a size envelope of DN15–DN65 and 1/2 to 2 1/2 BSP female connections. The published pressure range for the LGS route is 0.2–24 bar. The cited route does not enumerate seat materials, spring ranges by size, temperature limits, orifice designations, or applicable codes and standards. These parameters are not publicly documented in the available record and should be obtained directly from Seetru before any engineering selection is finalised. The LGS envelope is the only confirmed technical scope.

Markets and applications

The available record does not document specific end markets, industry sectors, or application examples for the LGS series. The multi-purpose descriptor is the only published application hint, and the cited route does not define which media, processes, or duty classes are supported within that descriptor. The geographic base is documented as United Kingdom, with the company located in Bristol, but export coverage, sector references, and installed base references are not publicly documented. Engineers should query Seetru directly for application evidence.

Evidence limitations

The following buying fields are not publicly documented in the cited Seetru route: full model code list, individual set pressure variants, material specifications including body, trim and seat, temperature ratings, certified capacity figures, applicable design codes and standards, ATEX or PED conformity statements, testing and certification scope, lead times, price bands, authorised distributor network, service and overhaul provisions, and installed base references. Buyers requiring any of these for procurement or engineering qualification should request them in writing from Seetru and not infer values from comparable product lines.

Editorial summary

Seetru Limited is a United Kingdom manufacturer headquartered in Bristol. The documented product category is safety relief valves, with the cited route being the LGS multi-purpose safety relief valve series. The published scope in the available record is restricted to that single series. The directory treats this as a narrow-line source until further documented evidence of additional series or variants is recorded. Engineering readers should use the LGS entry as the documented reference point and verify any further capability directly with the manufacturer before specification.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S9]
  • Production capacity [S9]
  • Certifications [S9]
  • Availability or stock [S9]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Seetru company context is retained from its official contact page. LGS facts and the page-bound product image are scoped only to the cited safety-relief route. Revenue, certification, capacity, stock, delivery and service claims were not asserted. [S9]Company-stated

Frequently asked questions

What Safety Relief Valve product is documented for Seetru Limited?

The retained product material names LGS multi-purpose safety relief valves. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published sizes should a buyer compare?

The cited product material records: The cited LGS route lists DN15–DN65 and 1/2 to 2 1/2 BSP female sizes. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published pressure range should a buyer compare?

The cited product material records: The cited LGS route lists a 0.2–24 bar pressure range. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Production capacity, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S9]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.