Power Cable manufacturer profile

Southwire Company, LLC

Southwire Company, LLC is a power cable manufacturer based in Carrollton, United States. [S2][S1]

Country
United States [S1]
City
Carrollton [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Voltage and temperature
SPEC 44031 is rated up to 40 kV for continuous conductor operation up to 90 degrees C. [S4]
Construction
The page specifies tinned Class B or C copper, EPDM insulation and a CPE jacket. [S5]
Southwire SPEC 44031 medium-voltage jumper and switchgear cable
Official product image [S6]

Evidence scope

The retained official product route documents: Southwire documents SPEC 44031 as a non-shielded medium-voltage jumper and switchgear power cable. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Power Cable

Documented series: Southwire SPEC 44031 medium-voltage jumper and switchgear cable

Southwire documents SPEC 44031 as a non-shielded medium-voltage jumper and switchgear power cable. [S6]

Documented specifications for Power Cable
Service temperature90°C [S9]
Voltage and temperature
SPEC 44031 is rated up to 40 kV for continuous conductor operation up to 90 degrees C. [S4]
Construction
The page specifies tinned Class B or C copper, EPDM insulation and a CPE jacket. [S5]
  • Southwire SPEC 44031 medium-voltage jumper and switchgear cable [S6]

Selection fit: Compare conductor size, insulation thickness, bend radius and switchgear or substation installation requirements before purchase. [S7]

Product range and documented series

Southwire documents SPEC 44031 as a non-shielded medium-voltage jumper and switchgear power cable. [S6]

  • Southwire SPEC 44031 medium-voltage jumper and switchgear cable [S6]Source note: Southwire SPEC 44031 medium-voltage jumper and switchgear cable

Procurement fit

Procurement of the documented series should be evaluated against four specific parameters: conductor size, insulation thickness, bend radius, and the switchgear or substation installation requirements applicable to the project. The SPEC 44031 designation is the only documented series for this category, so selection should be limited to that designation when matching the documented application. Buyers should confirm that the 40 kV and 90°C continuous ratings align with their installation design prior to release.

Technical capabilities

The documented construction of the SPEC 44031 cable specifies tinned Class B or C copper conductor, EPDM insulation, and a CPE jacket. The service temperature is 90°C, and the cable is rated up to 40 kV for continuous conductor operation up to 90°C. The tinned copper conductor is documented at Class B or C stranding, which is the only conductor configuration noted in the available data. No additional voltage classes, alternate conductor materials, or jacket options are documented for this series.

Markets and applications

The documented series is positioned for medium-voltage jumper and switchgear cable applications. The 40 kV rating and 90°C continuous operating temperature, combined with the tinned copper conductor and EPDM and CPE construction, indicate an application environment typical of substation interconnections, switchgear cabling, and similar medium-voltage power distribution hardware installations. The documented scope is limited to a single product designation, and no additional market segments, customer categories, or end-use industries are specified in the available documentation.

Evidence limitations

Several fields commonly reviewed during specification evaluation are not publicly documented. Company founding date, employee count, manufacturing footprint beyond the Carrollton location, and revenue figures are not publicly documented. Third-party certifications, testing laboratory approvals, and quality system registrations are not publicly documented. A list of completed projects, named customers, and distributor network details are not publicly documented. Other product families, voltage classes, and conductor configurations outside the SPEC 44031 series are not publicly documented.

Editorial summary

Southwire Company, LLC, based in Carrollton, United States, is documented in the power cable category for the SPEC 44031 medium-voltage jumper and switchgear cable. The company is recorded within an industrial specification framework for medium-voltage cabling products intended for substation and switchgear interconnection. The documented series addresses a defined application segment of medium-voltage power distribution hardware, with construction and rating data consistent with substation jumper and switchgear cable use cases.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate identity and location are retained from the cited official source. Product facts and visual are limited to Southwire SPEC 44031 medium-voltage jumper and switchgear cable; no unlisted company-wide performance, stock, manufacturing-site or revenue claim is asserted. [S8]Company-stated

Frequently asked questions

What Power Cable product is documented for Southwire Company, LLC?

The retained product material names Southwire SPEC 44031 medium-voltage jumper and switchgear cable. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published voltage and temperature should a buyer compare?

The cited product material records: SPEC 44031 is rated up to 40 kV for continuous conductor operation up to 90 degrees C. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published construction should a buyer compare?

The cited product material records: The page specifies tinned Class B or C copper, EPDM insulation and a CPE jacket. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.