Submersible Pump manufacturer profile

Speroni S.p.A.

Speroni S.p.A. is a submersible pump manufacturer based in Castelnovo di Sotto, Italy. [S2][S1]

Country
Italy [S1]
City
Castelnovo di Sotto [S2]
Website
speroni.it
SX 4 (100)
Official product image [S9]

Evidence scope

The retained official product route documents: Speroni documents SX 4 (100) multistage submersible water pumps for 4-inch deep wells. This dossier uses that cited route as the editorial scope. [S4]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S6]

Submersible Pump

Documented series: SX 4 (100) multistage submersible water pumps for 4-inch deep wells.

Speroni documents SX 4 (100) multistage submersible water pumps for 4-inch deep wells. [S4]

Documented specifications for Submersible Pump
Flow rate50 L/min [S7]
Service temperature35°C [S8]
StandardEN 60335-2-41 [S8]
  • SX 4 (100) multistage submersible water pumps for 4-inch deep wells. [S4]

Selection fit: Evaluate SX 4 only for the published deep-well clean-water route and stated civil, industrial, irrigation or fire-installation contexts; confirm duty, water quality, materials and installation with Speroni. [S5]

Product range and documented series

Speroni documents SX 4 (100) multistage submersible water pumps for 4-inch deep wells. [S4]

  • SX 4 (100) multistage submersible water pumps for 4-inch deep wells. [S4]Source note: Multistage submersible water pumps for 4 inch deep wells

Procurement fit

The SX 4 (100) is documented as suitable for evaluation only along the published deep-well clean-water route, applied in civil, industrial, irrigation, or fire-installation contexts. Procurement should treat those four application areas as the stated envelope. Duty cycle, water quality compatibility, material confirmation, and installation requirements are flagged for direct verification with Speroni prior to order release, as the available record does not enumerate these parameters.

Technical capabilities

The SX 4 (100) is documented as a multistage submersible water pump engineered for 4-inch deep wells. Construction material is stated as stainless steel. No flow rate, head, power rating, speed, duty classification, or efficiency figure is published in the available record. No hydraulic performance curve, motor specification, or control interface description is provided. These parameters must be obtained from Speroni technical documentation before sizing or specification.

Markets and applications

Stated applications for the SX 4 (100) series are civil water supply, industrial water supply, irrigation, and fire-installation service, all tied to 4-inch deep-well clean-water deployment. No geographic market list, channel structure, installer network, or end-user reference is published. Application boundaries beyond the four named sectors are not enumerated in the available record and should be confirmed with the manufacturer.

Evidence limitations

Several routine procurement fields are not publicly documented in the available record, including specific flow and head performance, motor power rating, electrical supply, efficiency class, ingress protection rating, certifications, manufacturing lead time, warranty terms, authorized distributor list, and installed base references. The submersible pump category contains only the SX 4 (100) series, and no other model families or ratings are listed. Any quantitative or commercial claim beyond the facts above should be sourced directly from Speroni.

Editorial summary

Speroni S.p.A. is an Italy-based manufacturer of submersible pump equipment, headquartered in Castelnovo di Sotto. The published submersible pump category centers on the SX 4 (100) series, described as multistage submersible water pumps designed for 4-inch deep wells. Wetted construction is documented as stainless steel. Specification scope is narrow and limited to the SX 4 (100) series, with no additional product families listed in the available record.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S6]
  • Certifications [S6]
  • Availability or stock [S6]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Speroni S.p.A. identity and Castelnovo di Sotto location are retained from the official SX 4 page footer. The SX 4 membership and page-bound image are scoped to 4-inch deep-well water pumps. Revenue, certification, stock, service and delivery claims were not asserted. [S6]Company-stated

Frequently asked questions

What Submersible Pump product is documented for Speroni S.p.A.?

The retained product material names SX 4 (100) multistage submersible water pumps for 4-inch deep wells. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S6]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.