Peristaltic Pump manufacturer profile

Stenner Pump Company

Stenner Pump Company is a peristaltic pump manufacturer based in Jacksonville, Florida, United States. [S2][S1]

Country
United States [S1]
City
Jacksonville, Florida [S2]
S10P Series
Official product image [S9]

Evidence scope

The retained official product route documents: Stenner documents the S10P Series as a water-flow-activated peristaltic metering-pump route. This dossier uses that cited route as the editorial scope. [S4]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S6]

Peristaltic Pump

Documented series: S10P Series water-flow-activated peristaltic metering pumps.

Stenner documents the S10P Series as a water-flow-activated peristaltic metering-pump route. [S4]

Documented specifications for Peristaltic Pump
Materialpolycarbonate [S7]
Pressure rating25 psi [S8]
  • S10P Series water-flow-activated peristaltic metering pumps. [S4]

Selection fit: Use S10P only for its stated water-flow-activated metering route, then confirm output, pressure, tubing, control signal, chemical compatibility, availability and lead time directly with Stenner. [S5]

Product range and documented series

Stenner documents the S10P Series as a water-flow-activated peristaltic metering-pump route. [S4]

  • S10P Series water-flow-activated peristaltic metering pumps. [S4]Source note: S10P Series; peristaltic metering pump

Procurement fit

The S10P Series is documented for use where water-flow-activated metering is the specified control route. Per the manufacturer guidance, the pump should be specified only for that stated operating mode. Before release to purchasing, the following items must be confirmed directly with Stenner: output capacity, pressure rating, tubing material, control signal interface, chemical compatibility with the process fluid, current availability, and lead time. Substituting this pump for applications outside water-flow-activated metering is not supported by the documented record.

Technical capabilities

Within the documented scope, the S10P Series functions as a peristaltic metering pump whose actuation is tied to water flow, distinguishing it from fixed-rate or pulse-driven metering designs. The mechanism uses tubing compression to displace fluid, which typically limits suction lift, pressure ceiling, and flow rate relative to positive-displacement rotodynamic equipment. Detailed numerical values for capacity, maximum pressure, tubing durometer, power supply voltage, enclosure rating, and materials of construction are not publicly documented in the available record. Verification against the current Stenner data sheet is required for any specification.

Markets and applications

Based on the documented description, the S10P Series is applicable to dosing tasks that require metering to be initiated or scaled by the presence and rate of water flow, such as chemical injection tied to potable water lines, process rinse water, or cooling water circuits. The water-flow-activated control architecture implies pairing with proportional or on-demand feed strategies rather than standalone timed dosing. Specific industry segments served, installed base size, and reference installations are not publicly documented.

Evidence limitations

The following commonly requested specification and buying fields are not publicly documented in the available record: detailed flow range, pressure rating, tubing material options and replacement intervals, voltage and power requirements, enclosure or ingress protection rating, agency listings, chemical compatibility chart, dimensions and weight, control signal type, and standard lead time. Pricing structure, distributor network, warranty terms, and any certifications or compliance marks are likewise not publicly documented. Engineers and buyers should request the current S10P data sheet and price list directly from Stenner Pump Company before finalizing any procurement decision.

Editorial summary

Stenner Pump Company is documented as a United States manufacturer based in Jacksonville, Florida, operating within the peristaltic pump category. The single product line referenced in the available record is the S10P Series, described as a water-flow-activated peristaltic metering pump. No additional series, legacy models, or accessory lines are listed in the documentation. Company size, founding date, ownership structure, and headcount are not publicly documented. Procurement and engineering readers should treat the S10P Series as the sole confirmed entry point when evaluating Stenner for specification purposes.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S6]
  • Availability or stock [S6]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate identity and Jacksonville location are retained from Stenner's official company page. S10P product evidence and its exact official product image are retained separately. Revenue, certificates, local stock, lead time and service claims were not asserted. [S6]Company-stated

Frequently asked questions

What Peristaltic Pump product is documented for Stenner Pump Company?

The retained product material names S10P Series water-flow-activated peristaltic metering pumps. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S6]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.