Control Cable manufacturer profile

Sunray Industries

Sunray Industries is a control cable manufacturer based in Greater Noida, India. [S2][S1]

Country
India [S1]
City
Greater Noida [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Rating and conductor
IS 694:2010, 1100 V AC and Class 5 fine-stranded copper conductor. [S4]
Range and movement
0.5 to 2.5 mm² and 2 to 24 cores; fixed or occasional bending rather than continuous cable-chain flexing. [S5]
National Cables industrial control cable grey sheath numbered cores
Official product image [S11]

Evidence scope

The retained official product route documents: Sunray Industries documents the National Cables industrial control-cable series for fixed or occasional flex. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Control Cable

Documented series: National Cables Industrial Control Cable, grey sheath / numbered cores.

Sunray Industries documents the National Cables industrial control-cable series for fixed or occasional flex. [S6]

Documented specifications for Control Cable
StandardIEC 60332-1-2 [S9]
Service temperature85°C [S10]
Rating and conductor
IS 694:2010, 1100 V AC and Class 5 fine-stranded copper conductor. [S4]
Range and movement
0.5 to 2.5 mm² and 2 to 24 cores; fixed or occasional bending rather than continuous cable-chain flexing. [S5]
  • National Cables Industrial Control Cable, grey sheath / numbered cores. [S6]

Selection fit: Compare by core count, conductor area and fixed or occasional-flex installation; exclude it when continuous drag-chain service is required. [S7]

Product range and documented series

Sunray Industries documents the National Cables industrial control-cable series for fixed or occasional flex. [S6]

  • National Cables Industrial Control Cable, grey sheath / numbered cores. [S6]Source note: Industrial Control Cable

Procurement fit

The National Cables Industrial Control Cable is intended for fixed or occasionally bent installations rather than continuous flexing duty. Specification work should compare the cable on core count, conductor cross-section and installation regime, and exclude it where drag-chain or repetitive continuous motion service is specified. Supply is offered in 500 m reels. Voltage rating of 1100 V AC and a 70 °C service temperature should be checked against the control circuit and ambient conditions of the intended panel or field route. Detailed commercial terms, lead time and minimum order quantity are not publicly documented.

Technical capabilities

The control cable uses Class 5 fine-stranded copper conductors available from 0.5 to 2.5 mm². Core counts span 2 to 24, identified by printed numbers on the grey outer sheath. Insulation and sheath chemistry is halogen-free, with IEC 60754-1 compliance addressing acid gas emission. The cable is rated to IS 694:2010 at 1100 V AC, suitable for signal and control runs in static or occasional-bend layouts. Maximum service temperature is 70 °C. Continuous-flex or drag-chain duty is not part of the documented capability. Other construction parameters are not publicly documented.

Markets and applications

Sunray Industries supplies control cable into the Indian industrial market from Greater Noida, with the National Cables Industrial Control Cable oriented to control panel wiring, machine interconnects and fixed-installation field runs in plants. The halogen-free sheath and IEC 60754-1 compliance make it relevant where reduced acid gas emission is a specified requirement. The 1100 V AC rating and 2 to 24 core range support typical control and instrumentation circuits. International market presence and segment-specific application data are not publicly documented in the source record.

Evidence limitations

The record is limited to a single product line, the National Cables Industrial Control Cable, with no further series or voltage variants listed. Values such as minimum bend radius, outer diameter, weight per kilometre, flame test class, country of origin for raw materials, lead time, MOQ, warranty terms, and any third-party certification beyond IEC 60754-1 and IS 694:2010 are not publicly documented. Recent specification revisions or signal updates are not publicly documented. Company size, founding date and workforce figures are not publicly documented.

Editorial summary

Sunray Industries is an India-based cable manufacturer located in Greater Noida, documented for its National Cables Industrial Control Cable series. The product is a halogen-free, grey-sheathed control cable with numbered cores, supplied in 500 m lengths. Conformance to IS 694:2010 and IEC 60754-1 frames the cable for industrial control circuits operating at 1100 V AC within a 70 °C service temperature envelope. Procurement should reference the manufacturer directly for current availability and detailed datasheet. Recent specification updates are not publicly documented in the source record.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Production capacity [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate identity and location are retained from the cited official entity source. Product facts and the visual are limited to National Cables Industrial Control Cable, grey sheath / numbered cores. No revenue, capacity, availability or broader company-wide product claim is asserted. [S8]Company-stated

Frequently asked questions

What Control Cable product is documented for Sunray Industries?

The retained product material names National Cables Industrial Control Cable, grey sheath / numbered cores. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published rating and conductor should a buyer compare?

The cited product material records: IS 694:2010, 1100 V AC and Class 5 fine-stranded copper conductor. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published range and movement should a buyer compare?

The cited product material records: 0.5 to 2.5 mm² and 2 to 24 cores; fixed or occasional bending rather than continuous cable-chain flexing. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Production capacity, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.