Magnetic Drive Pump manufacturer profile

Teffiko

Teffiko is a magnetic drive pump manufacturer based in Italy. [S1]

Country
Italy [S1]

Evidence scope

The retained official product route documents: Italy API Centrifugal Pumps, Screw Pumps, Single Suction Twin Screw Pump Manufacturer, Supplier, Factory - TEFFIKO This dossier uses that cited route as the editorial scope. [S5]

Magnetic Drive Pump

Italy API Centrifugal Pumps, Screw Pumps, Single Suction Twin Screw Pump Manufacturer, Supplier, Factory - TEFFIKO [S5]

Documented specifications for Magnetic Drive Pump
Service temperature-30℃ [S3]
Pressure rating0.2MPa [S4]

Product range and documented series

Italy API Centrifugal Pumps, Screw Pumps, Single Suction Twin Screw Pump Manufacturer, Supplier, Factory - TEFFIKO [S5]

  • Service temperature: -30℃ [S3]Evidence scope: Service temperatureSource note: Temperature Range : -30℃ to 100℃ : Over-temperature is strictly prohibited to avoid fluoroplastic deformation or demagnetization :
  • Pressure rating: 0.2MPa [S4]Evidence scope: Pressure ratingSource note: Suction / Working Pressure : Suction ≤ 0.2MPa / Working ≤ 1.6MPa : Prevent deformation of the containment shroud under pressure :

Documented specifications

Service temperature-30℃ [S3]
Pressure rating0.2MPa [S4]

Procurement fit

Teffiko is documented to fit procurement for fluid-handling applications requiring a service temperature range of -30℃ to 100℃, with explicit warning that exceeding the upper limit is strictly prohibited to avoid fluoroplastic deformation or demagnetization. It also suits suction conditions at or below 0.2MPa and working pressures up to 1.6MPa, with over-pressure cautioned against to prevent deformation of the containment shroud.

Technical capabilities

Teffiko's documented technical specifications include a service temperature range of -30℃ to 100℃, with over-temperature conditions strictly prohibited to avoid fluoroplastic deformation or demagnetization. The pressure rating defines suction at or below 0.2MPa and working pressure up to 1.6MPa, with guidance to prevent deformation of the containment shroud under pressure.

Markets and applications

Teffiko’s documented service envelope of -30℃ to 100℃ together with a 0.2MPa suction and 1.6MPa working pressure rating indicates a design suited to moderate-temperature, non-extreme industrial fluid handling, such as chemical transfer, water treatment, and light-process pumping, where the noted risks of fluoroplastic deformation, demagnetization, and containment shroud stress under over-temperature or over-pressure conditions constrain its deployment to controlled, within-limits duty rather than high-temperature or high-pressure service.

Evidence limitations

The documented facts do not establish Teffiko's performance, safety, or reliability beyond the stated limits of -30℃ to 100℃ and the suction pressure of ≤ 0.2MPa with working pressure of ≤ 1.6MPa. They do not verify real-world durability, long-term magnet stability, compatibility with specific fluids, or behavior outside those documented temperature and pressure ranges.

Editorial summary

Teffiko is specified to operate within a service temperature range of -30℃ to 100℃, with over-temperature conditions strictly prohibited to avoid fluoroplastic deformation or demagnetization. Its pressure ratings are defined with suction pressure held at or below 0.2MPa and working pressure at or below 1.6MPa, a limit intended to prevent deformation of the containment shroud under pressure. These documented parameters reflect the operational boundaries associated with Teffiko components, indicating sensitivity of internal materials to both thermal and mechanical stress.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Frequently asked questions

What Magnetic Drive Pump product is documented for Teffiko?

The retained product material names Service temperature: -30℃. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S3]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.