Cable Tray manufacturer profile

Vergokan NV

Vergokan NV is a cable tray manufacturer based in Oudenaarde, Belgium. [S2][S1]

Country
Belgium [S1]
City
Oudenaarde [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Configuration
Perforated or closed cable-tray configurations. [S4]
KBSCL connection
KBSCL FUSION trays click together without separate nuts, bolts, joining plates or clips. [S5]
Vergokan cable tray systems
Official product image [S11]

Evidence scope

The retained official product route documents: Vergokan documents perforated and closed cable trays across several KBS product families. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Cable Tray

Documented series: KBS, KBSI, KBSCL and KBSM-family cable trays.

Vergokan documents perforated and closed cable trays across several KBS product families. [S6]

Documented specifications for Cable Tray
MaterialStainless Steel [S9]
StandardEN 61537 [S10]
Configuration
Perforated or closed cable-tray configurations. [S4]
KBSCL connection
KBSCL FUSION trays click together without separate nuts, bolts, joining plates or clips. [S5]
  • KBS, KBSI, KBSCL and KBSM-family cable trays. [S6]

Selection fit: Compare the cited Vergokan tray families by perforated or closed configuration and connection method; confirm material, load and support requirements with Vergokan. [S7]

Product range and documented series

Vergokan documents perforated and closed cable trays across several KBS product families. [S6]

  • KBS, KBSI, KBSCL and KBSM-family cable trays. [S6]Source note: KBS, KBSI, KBSCL and KBSM-family cable trays.

Procurement fit

Procurement comparison across the cited KBS, KBSI, KBSCL and KBSM families should be made on two documented axes: perforated or closed configuration, and connection method. The KBSCL FUSION trays are described as clicking together without separate nuts, bolts, joining plates or clips, which simplifies the bill of materials. Final selection must be confirmed with Vergokan for material grade, load class and support spacing, as those parameters are not publicly documented.

Technical capabilities

The documented technical envelope is defined by stainless-steel construction and a choice of perforated or closed cable-tray configuration across the KBS, KBSI, KBSCL and KBSM families. The KBSCL FUSION joining system is described as a click-fit connection that requires no separate nuts, bolts, joining plates or clips, reducing the number of loose fasteners at the joint. No published figures are available for load class, deflection limits, temperature rating, fire performance, or surface finish within the documented facts.

Markets and applications

The documented scope is limited to cable-tray products, with no published market segmentation or application list. On the basis of the stainless-steel material and the availability of perforated and closed configurations, the families can be considered for general cable management duties where stainless construction is specified. Any sector-specific suitability, such as food, marine, offshore, tunnel or cleanroom service, is not publicly documented and would need to be confirmed directly with Vergokan.

Evidence limitations

The following common specification and procurement fields are not publicly documented in the supplied facts and should be requested from Vergokan: load class and deflection data, tray width and height dimensions, material grade designation, surface finish, fire or corrosion classification, temperature rating, support spacing guidance, compatible accessories, and any third-party certification. Country and city (Belgium, Oudenaarde) are the only location facts provided; headcount, plant area and founding date are not publicly documented.

Editorial summary

Vergokan NV is a Belgian manufacturer of cable tray systems, located in Oudenaarde and documented within the cable-tray category. The published range covers the KBS, KBSI, KBSCL and KBSM-family cable trays, all produced in stainless steel. Each family is offered in either perforated or closed configuration, allowing the specifier to select an open or solid base geometry according to the routing and mechanical requirements of the installation.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Production capacity [S8]
  • Certifications [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate identity and location are retained from the cited official entity page. Product facts and the visual are limited to KBS, KBSI, KBSCL and KBSM-family cable trays. No revenue, capacity, availability, certification or broader product-line claim is asserted. [S8]Company-stated

Frequently asked questions

What Cable Tray product is documented for Vergokan NV?

The retained product material names KBS, KBSI, KBSCL and KBSM-family cable trays. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published configuration should a buyer compare?

The cited product material records: Perforated or closed cable-tray configurations. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published kbscl connection should a buyer compare?

The cited product material records: KBSCL FUSION trays click together without separate nuts, bolts, joining plates or clips. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Production capacity, Certifications, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.