Plunger Pump manufacturer profile

WOMA GmbH

WOMA GmbH is a plunger pump manufacturer based in Duisburg, Germany. [S2][S1]

Country
Germany [S1]
City
Duisburg [S2]
High Pressure Plunger Pump Type 1002
Official product image [S10]

Evidence scope

The retained official product route documents: WOMA GmbH publishes high-pressure plunger-pump product routes from its Duisburg location. This dossier uses that cited route as the editorial scope. [S5]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S7]

Plunger Pump

Documented series: WOMA Type 1002 high-pressure plunger pump with official stated maximum operating pressure of 750 bar and maximum flow of 171 l/min.

WOMA GmbH publishes high-pressure plunger-pump product routes from its Duisburg location. [S5]

Documented specifications for Plunger Pump
Pressure rating3,000 bar [S8]
Flow rate230 l/min [S9]
  • WOMA Type 1002 high-pressure plunger pump with official stated maximum operating pressure of 750 bar and maximum flow of 171 l/min. [S4]

Selection fit: Start with WOMA Type 1002 only within its stated high-pressure and flow bounds, then confirm duty, water quality, materials, seals, drive, tools, service access, availability and lead time directly with WOMA. [S6]

Product range and documented series

WOMA GmbH publishes high-pressure plunger-pump product routes from its Duisburg location. [S5]

  • WOMA Type 1002 high-pressure plunger pump with official stated maximum operating pressure of 750 bar and maximum flow of 171 l/min. [S4]Source note: max. operating pressure of 750 bar; max. flow rate of 171 l/min

Procurement fit

Procurement should begin with the WOMA Type 1002 only within its stated high-pressure and flow bounds, which are 750 bar maximum operating pressure and 171 l/min maximum flow. Confirming duty cycle, water quality, materials of construction, seal arrangement, drive configuration, tooling interface, service access, parts availability, and current lead time must be handled directly with WOMA, as these parameters are not fixed by the entry-level data. The Type 1002 should not be specified for applications that fall outside the published maximum pressure or maximum flow values without written confirmation from the manufacturer.

Technical capabilities

The WOMA Type 1002 is a high-pressure plunger pump with an official stated maximum operating pressure of 750 bar and a maximum flow of 171 l/min. These two values constitute the published performance envelope and define the upper limit for any specification derived from this entry. No continuous-duty rating, NPSH requirement, speed range, plunger diameter, stroke length, weight, or dimensional envelope is recorded in the source data. Noise level, vibration limits, efficiency curves, and input power are likewise absent. Any further capability claim requires reference to a complete WOMA Type 1002 technical data sheet.

Markets and applications

The documentation supplied for WOMA GmbH does not record specific market sectors, end-use industries, or application examples. The only descriptive qualifier attached to the WOMA Type 1002 is that it is a high-pressure plunger pump. Consequently, the reader cannot assign this pump to any named duty without further verification from the manufacturer. The city of Duisburg and the country of Germany establish the point of manufacture, but no distribution map, dealer network, or installed-base reference is included in the facts available for this profile. Application scope is therefore not publicly documented.

Evidence limitations

The following commonly requested procurement fields are not publicly documented in the supplied source material: corporate founding year, employee count, revenue, production capacity, ISO or other quality certifications, material specifications for the fluid end, seal type and supplier, drive motor type and power rating, noise emission figure, overall dimensions and weight, authorised distributor list, lead time, service interval schedule, and warranty terms. Any figure beyond the WOMA Type 1002 maximum operating pressure of 750 bar and maximum flow of 171 l/min should be requested directly from WOMA GmbH in Duisburg, Germany, before being entered into a specification.

Editorial summary

WOMA GmbH is a manufacturer of industrial plunger pumps based in Duisburg, Germany. The company's plunger-pump portfolio is documented through the WOMA Type 1002 high-pressure plunger pump. This entry is restricted to the components, ratings, and procurement guidance that appear in the source documentation. No additional product lines, model variants, or corporate history have been verified for inclusion. Specifications and ratings cited elsewhere in this profile derive solely from the WOMA Type 1002 data sheet entry. The reader should treat the company address and category scope as the only confirmed identifying data.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S7]
  • Availability or stock [S7]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • WOMA identity and Duisburg location are retained from its official site. Type 1002 plunger-pump evidence and its exact official image are retained separately. Revenue, certificates, stock, service claims and delivery claims were not asserted. [S7]Company-stated

Frequently asked questions

What Plunger Pump product is documented for WOMA GmbH?

The retained product material names WOMA Type 1002 high-pressure plunger pump with official stated maximum operating pressure of 750 bar and maximum flow of 171 l/min. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S4]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S7]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.