Static VAR Generator manufacturer profile

Zhejiang JYINS Electrical Co., Ltd.

Zhejiang JYINS Electrical Co., Ltd. is a static VAR generator manufacturer based in Wenzhou, China. [S2][S1]

Country
China [S1]
City
Wenzhou [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Electrical configurations
The page lists 220, 400, 480 and 690 V, 3P3W or 3P4W and 50 or 60 Hz plus or minus 5 percent configurations. [S4]
Control and communications
It lists DSP plus FPGA control, response at or below 50 microseconds and Modbus RTU or TCP-IP over RS485, CAN or Ethernet options. [S5]
JYINS SVG dynamic reactive-power-compensation cabinet
Official product image [S6]

Evidence scope

The retained official product route documents: JYINS documents a finished SVG dynamic reactive-power-compensation cabinet. This dossier uses that cited route as the editorial scope. [S6]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S8]

Static Var Generator

Documented series: JYINS SVG dynamic reactive-power-compensation cabinet

JYINS documents a finished SVG dynamic reactive-power-compensation cabinet. [S6]

Documented specifications for Static Var Generator
Service temperature-10℃ [S9]
Electrical configurations
The page lists 220, 400, 480 and 690 V, 3P3W or 3P4W and 50 or 60 Hz plus or minus 5 percent configurations. [S4]
Control and communications
It lists DSP plus FPGA control, response at or below 50 microseconds and Modbus RTU or TCP-IP over RS485, CAN or Ethernet options. [S5]
  • JYINS SVG dynamic reactive-power-compensation cabinet [S6]

Selection fit: Voltage, wiring, current and enclosure claims remain configuration scoped; the official media host does not create a second entity. [S7]

Product range and documented series

JYINS documents a finished SVG dynamic reactive-power-compensation cabinet. [S6]

  • JYINS SVG dynamic reactive-power-compensation cabinet [S6]Source note: JYINS SVG dynamic reactive-power-compensation cabinet

Procurement fit

The JYINS SVG cabinet is presented as a configuration-scoped reactive-power-compensation product. Procurement options cover four nominal voltage levels (220, 400, 480 and 690 V), two wiring arrangements (3P3W or 3P4W) and 50 or 60 Hz operation within plus or minus 5 percent. Voltage, wiring, current rating and enclosure specification are tied to the selected build. The official media host is noted to not create a second entity, implying ordering is on a configured basis rather than from a fixed SKU table.

Technical capabilities

Documented capability values include a service temperature rating of -10 degrees Celsius and an IP20 ingress protection rating. The listed supply length is 1000 m. Control is implemented using DSP plus FPGA, with a response time at or below 50 microseconds. Communication options comprise Modbus RTU or TCP-IP over RS485, CAN or Ethernet physical layers. Frequency tolerance is plus or minus 5 percent around 50 or 60 Hz. Cooling method, thermal derating curves, harmonic spectrum, kVAr rating, dimensions and weight are not stated in the available facts.

Markets and applications

The documented scope is limited to the static var generator category, with the JYINS SVG dynamic reactive-power-compensation cabinet as the only series listed. The electrical configurations cover 220, 400, 480 and 690 V, 3P3W or 3P4W wiring and 50 or 60 Hz operation, which is consistent with low-voltage industrial power factor correction and dynamic reactive power support. Specific end markets, reference installations, application notes and target industry verticals are not stated in the available documentation.

Evidence limitations

Several commonly requested buying fields are not publicly documented. These include kVAr or kVA ratings, current ratings, enclosure dimensions and weight, cooling method, MTBF, the operating temperature range above the stated -10 degrees Celsius service temperature, harmonic performance data, short-circuit withstand, isolation and surge ratings, applicable IEC or GB standards, certifications, regional approvals and warranty terms. Order lead time, minimum order quantity and named reference installations are also not publicly documented.

Editorial summary

Zhejiang JYINS Electrical Co., Ltd. is a manufacturer based in Wenzhou, China, with documented activity in the static var generator category. The single documented series is the JYINS SVG dynamic reactive-power-compensation cabinet. The product is described in configuration-scoped terms, with operating envelopes, control architecture and communication options stated per build rather than as fixed catalog values. No additional product families, model codes or series numbers are listed in the available documentation.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

  • Annual sales [S8]
  • Availability or stock [S8]
Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Identity and location are retained from the cited official source. Product facts and visual are limited to JYINS SVG dynamic reactive-power-compensation cabinet; no unlisted company-wide performance, availability, production or revenue claim is asserted. [S8]Company-stated

Frequently asked questions

What Static VAR Generator product is documented for Zhejiang JYINS Electrical Co., Ltd.?

The retained product material names JYINS SVG dynamic reactive-power-compensation cabinet. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published electrical configurations should a buyer compare?

The cited product material records: The page lists 220, 400, 480 and 690 V, 3P3W or 3P4W and 50 or 60 Hz plus or minus 5 percent configurations. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published control and communications should a buyer compare?

The cited product material records: It lists DSP plus FPGA control, response at or below 50 microseconds and Modbus RTU or TCP-IP over RS485, CAN or Ethernet options. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S8]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.