A USD 8.73 billion ball valve market in 2025 is being reshaped by metal-seated designs, IoT-ready actuation, and updated API, ISO, and ASME standards. [S1]
For specifying engineers, the relevant signals are not the headline CAGR but the underlying shifts in qualification work. The API 6D 2024 update introduces explicit hydrogen-service provisions covering materials, high-pressure gas testing, fugitive emissions, and fire-safe requirements, so any project touching hydrogen or high-pressure gas will need valves documented against the new clause set. ISO 17292:2015 was reconfirmed in 2025, and ASME B16.34-2025 sets the current pressure-temperature and testing baseline, meaning existing datasheets referencing earlier revisions should be re-checked. Floating designs still dominate at 58.0% share, but trunnion and severe-service metal-seated products are the segment where material, coating, and actuation choices most directly affect lifecycle cost and emissions compliance. [S1]
What the report actually says
The Global Ball Valves Market was valued at USD 8.73 billion in 2025 and is projected to reach USD 13.57 billion by 2032, growing at a CAGR of 6.5% during 2026-2032, according to Strategic Market Research, with the report header dated 14-Aug-2026 and a publication stamp of 18 Aug 2026. [S1]
The report frames growth around industrial and infrastructure expansion in water treatment, power generation, oil and gas, and chemical processing, and around the integration of smart technologies and IoT-enabled automation for remote monitoring of pressure, temperature, and flow conditions. [S1]
Technology shifts named in the report
Metal-seated ball valve technology is identified as a primary advance, with hardened, precisely finished balls and seats, plus surface treatments including hard coatings, nickel treatments, and PVD processes, cited as improving resistance to wear, corrosion, scratching, and galling in severe service. [S1]
Valmet, through its Neles and Jamesbury portfolios, is named for metal-to-metal seating, ceramic and coated configurations, and noise and cavitation control features; Flowserve is named for Argus and MOGAS severe-service ball valves with metal seating, application-specific coatings, and wear protection for high-temperature, high-pressure, abrasive, and corrosive duties. [S1]
Rotork is named for intelligent actuator platforms providing real-time diagnostics and asset-health information, and Emerson is named for Bettis and FIELDVUE technologies supporting intelligent actuation, valve diagnostics, and maintenance decision-making. [S1]
Standards and the split by mounting type
API Specification 6D, ISO 17292:2015 reconfirmed in 2025, and ASME B16.34-2025 are the three standards called out, alongside U.S. EPA methane rules addressing fugitive emissions from oil and natural-gas equipment including valves. [S1]
On construction type, floating ball valves held 58.0% of the market in 2025 at USD 5.07 billion, forecast to USD 7.46 billion by 2032 at a 5.70% CAGR, with Flowserve's Worcester portfolio and Emerson's K-Ball range cited as representative floating-valve offerings for general, cryogenic, high-integrity, stainless, and industrial duties; trunnion-mounted ball valves accounted for the remaining 42.0% share, with the body text cutting off before the trunnion figures are given. [S1]
How to check the primary source
The market sizing, growth rate, and share split should be verified directly in the Strategic Market Research report at the source URL, and any specification clause referencing hydrogen service, fire-safe design, or fugitive emissions should be traced back to API 6D (2024 update) rather than the secondary summary. [S1]
Coating and seat-material claims for the named Neles, Jamesbury, Argus, MOGAS, Worcester, and K-Ball lines should be cross-checked against each manufacturer's current product datasheets, and actuator diagnostics claims for Rotork and Emerson should be confirmed against the relevant FIELDVUE and Rotork platform documentation before being written into a datasheet or procurement specification. [S1]
Primary notice: Industry news.
Product encyclopedia: Ball Valve.