A software-license bandwidth upgrade on a modern oscilloscope is a paid entitlement that unlocks an analog or DSP path the hardware already supports, shipped as a node-locked license key rather than a hardware return-and-replace. Tektronix lists node-locked bandwidth upgrades for the TBS2000B series at USD 532 to USD 1,650, and a 100→350 MHz MSO24 unlock at USD 5,600, in the Software License Manager catalog [S1].
Keysight sells the same unlock model on the InfiniiVision HD3 series, with a license-only path that takes the platform to 1 GHz without returning the instrument to the factory [S3]. The pattern repeats across the industry on entry and mid-range platforms from Rohde & Schwarz, Siglent, UNI-T, GWINSTEK, and Rigol, and it changes the procurement math for bench planning.
What the license actually buys: hardware already capable, code gating the stop-band
On every modern scope that supports license-only bandwidth upgrades, the analog front-end, ADC, and DSP are specified to the top tier of the family at the factory, and a calibration table or FPGA register gate limits the usable -3 dB bandwidth on cheaper SKUs [S5]. The license key from the vendor writes a new calibration constant that opens the stop-band and re-labels the front panel; no hardware swap, no factory calibration, no return shipping [S3][S5].
Tektronix 2 Series MSO pricing illustrates the curve: SUP2-BW100T200-2 is USD 1,030, SUP2-BW100T350-2 is USD 4,710, and SUP2-BW100T500-2 is USD 7,630, showing the cost-per-MHz unlocked rising steeply past 350 MHz on a 2-channel platform [S1]. The same instrument on a 4-channel body, MSO24, prices SUP2-BW100T500-4 at USD 8,440, which is only USD 810 above the 2-channel equivalent, a useful rule when capacity planning 4-channel channels [S1].
Concrete 2026 price points from public catalogs
Tektronix Software License Manager (saleable licenses) lists node-locked bandwidth entitlements as USD figures attached to specific model codes [S1]: SUP2-BW7T102 (TBS2000B 2-channel, 70→100 MHz) USD 532, SUP2-BW10T202 (100→200 MHz) USD 1,090, SUP2-BW7T202 (70→200 MHz, 2-ch) USD 1,650, SUP2-BW7T204 (70→200 MHz, 4-ch) USD 1,370, SUP2-BW200T350-2 (2 Series, 200→350 MHz) USD 3,680, and SUP2-BW350T500-2 (350→500 MHz) USD 2,920 [S1].
Rohde & Schwarz lists the MXO 44 bandwidth upgrade at NOK 20,196 to NOK 162,690 across the tier ladder, the upper figure consistent with the full top-of-stack unlock on a 4-channel 1 GHz-class platform [S2]. Keysight publishes the HD3BW upgrade for the HD3 family as a license-only path to 1 GHz, marketed explicitly as a "protect your investment" enticement to buy a lower tier and step up later [S3]. UNI-T ships the MSO5000HD-BW5MT1G as a software license key that takes the MSO5000HD from its shipped 500 MHz to 1 GHz, with the reseller confirming the underlying hardware already supports the higher -3 dB point [S5].
Who the license model fits, and where it falls short

Software-only upgrades are the right call when a lab or production line is standardising on one vendor and one platform, and bandwidth need may rise with new product generations, because the unit ships with lower-tier options active and the team owns a single SKU on the bench [S3][S8]. They are also the right call when the analog performance of the next-tier SKU is otherwise identical, which is the default for modern 12-bit HD platforms, where resolution, ENOB, and memory depth are the same across bandwidth tiers [S5].
The model is the wrong call for users who would otherwise exploit known firmware hacks to unlock paid features; community discussion confirms that on Rigol DS1054Z, the perceived cost of license upgrades collapsed to the point where vendors stopped gating and ship all units unlocked [S4]. It is also the wrong call for users who need a step that crosses a hardware boundary, for example a 4-channel entry scope cannot become an 8-channel mid-range scope by license alone, because the second ASIC and trigger path are not present on the lower-tier motherboard. The relevant question is whether the band you need is the band the motherboard was built to handle, not just the band the front panel currently displays.
How the price ladder is structured across vendors
Three structural patterns show up in the 2026 catalogs. First, vendor-stepped increments: Tektronix TBS2000B steps at 70→100, 70→200, and 100→200 MHz, with the single-step 70→100 priced at USD 532-587 and the double-step 70→200 priced at USD 1,370-1,650, a roughly 2.5x to 3x premium for skipping the intermediate SKU [S1]. Second, ascending marginal cost on the same instrument: Tektronix MSO22 jumps from USD 1,030 (100→200) to USD 4,710 (100→350) to USD 7,630 (100→500), a steeper-than-linear curve that reflects the silicon cost the vendor is amortising per marginal MHz [S1]. Third, license-only delivery: Keysight HD3, R&S MXO 44, UNI-T MSO5000HD, and Siglent all sell the bandwidth step as a license key that does not require returning the unit, with calibration implied to remain in spec across the unlocked range [S2][S3][S5][S7].
Comparing the available options against four procurement criteria gives a clean decision frame. (1) Marginal cost per 100 MHz: Rigol and Siglent entry SKUs sit in the low-hundreds USD per 100 MHz tier, Tektronix TBS2000B mid-tier upgrades sit in the USD 500-800 per 100 MHz tier, and Tektronix 2 Series jumps to roughly USD 1,500-2,000 per 100 MHz past 200 MHz [S1][S8]. (2) Hardware return: Keysight, R&S, UNI-T, and Siglent deliver license-only [S2][S3][S5][S7]; some legacy Tektronix nodes historically required factory calibration tied to physical options, but the 2026 Software License Manager catalog lists bandwidth upgrades as node-locked licenses with no return-and-replace [S1]. (3) Top-of-stack ceiling: Keysight HD3 and R&S MXO 44 license ladders top out at 1 GHz, while UNI-T MSO5000HD reaches 1 GHz and Tektronix 2 Series tops at 500 MHz in license steps [S1][S2][S3][S5]. (4) Channel-count surcharge: Tektronix 4-channel upgrades are USD 100-810 more than 2-channel equivalents on the same family, a much smaller spread than the channel-count delta on a brand-new chassis purchase [S1].
Total cost of ownership: license price is not the only number

Procurement for bandwidth upgrades has to price three line items beyond the license fee: any required re-calibration, the cost of the bench-time window the scope will be out of service, and the residual value of the option if the unit is resold or transferred. The license-only delivery model collapses the service window to minutes, because the key is entered on the instrument and validated in firmware, no shipping, no calibration certificate, no re-spec [S3][S5][S7]. On the calibration side, vendor guidance consistently states the unlock does not invalidate the existing cal sticker because the analog path is the same hardware that was calibrated at the factory; the license is a digital enable, not a hardware modification [S3][S7].
Resale and transfer economics matter for capital planners. A node-locked license is bound to one instrument serial, so when the chassis reaches end of life the license value typically returns to zero, while a chassis that shipped with the higher bandwidth locked retains a higher used-market value because the buyer can re-license on a fresh chassis of the same family [S1]. The pragmatic implication is to buy the chassis tier you can afford and license the bandwidth up only when a concrete signal or standard demands it, rather than pre-purchasing bandwidth on day one on the assumption of future need.
Sourcing, standards, and what to track next
Standards bodies do not govern license pricing, but procurement discipline still has to follow a few industry references. IEC 61010-031 governs probe safety on the front-end that the license unlocks, and a higher-bandwidth license without a probe rated to the new stop-band does not buy usable measurement margin, so the probe line item has to be reviewed alongside the license order. A separate procurement question is rise-time: bandwidth and rise-time are linked by the scope's impulse response, and a license step that doubles bandwidth halves usable rise-time only on Gaussian-response platforms, a trade-off worth modelling before the purchase order goes in. [S4]
For buyers evaluating a new bench in 2026, two signals are worth tracking. First, watch the price spread between the 2-channel and 4-channel license SKUs on Tektronix 2 Series: the SUP2-BW100T500 tier sits at USD 7,630 (2-ch) and USD 8,440 (4-ch), a 10% delta that is unusually tight and may shift as the family matures [S1]. Second, watch whether the 1 GHz license tier on Keysight HD3 and UNI-T MSO5000HD continues to ship as a license-only path, or whether vendors migrate to hardware-gated options at the GHz ceiling as a way to lift average selling price on the top SKU [S3][S5].
For a deeper look at how bandwidth choices interact with edge fidelity on real clock edges, the Brick-Wall vs Gaussian Oscilloscope Response reference is a useful companion to this pricing analysis.