Manufacturer profile

Amphenol TPC Wire & Cable

Amphenol TPC Wire & Cable is a manufacturer based in Macedonia, United States. [S2][S1]

Country
United States [S1]
City
Macedonia [S2]

Procurement snapshot

Only hard product-level facts retained from the cited source route are shown below. A missing buying field is handled separately, rather than estimated from the listed series.

Electrical and temperature
600 V rating and 105 degrees C maximum conductor temperature. [S4]
Bend radius
Static bend radius 6 x cable outside diameter; dynamic bend radius 8 x outside diameter. [S5]
Trex-Onics continuous-flex cable
Official product image [S17]

Evidence scope

The retained official product route documents: Amphenol TPC documents Trex-Onics Overall Shielded Continuous Flex as a multi-conductor cable for industrial continuous-motion duty. This dossier uses that cited route as the editorial scope. [S8]

The retained research coverage separates company identity from the named product evidence. It does not turn one model or series into a claim about unlisted company-wide operations. [S10]

Drag Chain Cable

Documented series: Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable.

Amphenol TPC documents Trex-Onics Overall Shielded Continuous Flex as a multi-conductor cable for industrial continuous-motion duty. [S8]

Documented specifications for Drag Chain Cable
Flame / recognitionUL Recognized [S11]
Service temperature-40°C [S12]
Electrical and temperature
600 V rating and 105 degrees C maximum conductor temperature. [S4]
Bend radius
Static bend radius 6 x cable outside diameter; dynamic bend radius 8 x outside diameter. [S5]
  • Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable. [S6]

Selection fit: Compare for shielded continuous-flex control or instrumentation duty; verify conductor configuration, environment, bend radius and required approvals. [S9]

Shielded Cable

Documented series: Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable

Amphenol TPC documents Trex-Onics Overall Shielded Continuous Flex as an industrial multi-conductor cable. [S7]

Documented specifications for Shielded Cable
Flame / recognitionUL Recognized [S11]
Service temperature-40°C [S12]
Electrical and temperature
The exact page lists 600 V and a 105 degrees C maximum conductor temperature. [S13]
Bend radii
It publishes static and dynamic bend radii of 6 x and 8 x cable outside diameter. [S14]
  • Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable [S7]

Selection fit: Compare conductor configuration, shield, voltage, temperature and dynamic bend radius before selection. [S15]

Product range and documented series

Amphenol TPC documents Trex-Onics Overall Shielded Continuous Flex as a multi-conductor cable for industrial continuous-motion duty. [S8]

  • Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable. [S6]Source note: Trex-Onics Overall Shielded Continuous Flex
  • Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable [S7]Source note: Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable

Procurement fit

The Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable is documented for consideration where continuous-flex motion and overall shielding are required, including control or instrumentation circuits. Specification engineers should verify conductor count, conductor size, shield construction, and the application's environmental and mechanical envelope. The published procurement guidance directs buyers to compare dynamic bend radius, voltage rating, conductor temperature, and required approvals prior to release. Lead time, minimum order quantity, and stocking distributor information are not publicly documented in the source material.

Technical capabilities

For the Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable, the manufacturer publishes the following ratings. Service temperature is rated from -40°C. Electrical rating is 600 V with a maximum conductor temperature of 105 degrees C. The cable carries UL Recognized flame and recognition status. Mechanical limits are defined by bend radius: a static bend radius of 6 x cable outside diameter and a dynamic bend radius of 8 x outside diameter. Conductor material, jacket compound, and resistance values are not publicly documented.

Markets and applications

The documented procurement notes position the Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable for shielded continuous-flex control or instrumentation duty. The category listings of drag chain cable and shielded cable indicate intended use in cable carrier installations and shielded signal runs where overall shielding and flex endurance are required. Specific end-market verticals, industry segments, customer references, and named installation examples are not publicly documented. Selection should be driven by the published mechanical and electrical limits rather than inferred application ranges.

Evidence limitations

Conductor count, AWG range, jacket and insulation material, shield type and coverage, oil and chemical resistance ratings, and approvals beyond UL Recognized are not publicly documented in the source material. Maximum flex cycle rating, travel length, acceleration limits, and standard put-up lengths are also not publicly documented. No company founding date, employee count, facility list, or quality system certification is provided. Pricing, lead time, and authorized distributor information are likewise not publicly documented and should be requested directly from Amphenol TPC Wire & Cable.

Editorial summary

Amphenol TPC Wire & Cable, headquartered in Macedonia, United States, is documented in this directory under two product categories: drag chain cable and shielded cable. Both categories are represented by a single documented series, the Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable. No additional series, part numbers, or product families are listed in the source material. The company is referenced as a supplier of industrial cable products carrying UL recognition, with electrical and mechanical ratings published for the named series only.

Compiled prose, not a quotation. It restates facts drawn from the cited rows above and adds none of its own. It is not itself a sourced record, so read the cited sections for the authoritative wording.

Not published in retained sources

These common buyer fields were explicitly outside the retained source coverage for this dossier. They are shown as omissions, not filled with a proxy, a related model or an assumption.

Research coverage

Evidence states describe the public material reviewed for this profile; they do not rate the company or assert an undisclosed fact.

  • Corporate identity and location are retained from the official company surface. Product facts and visual are limited to the cited Trex-Onics cable; the product mark is not a separate company. [S10]Company-stated
  • Identity and location are retained from the cited official source. Product facts and visual are limited to Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable; no unlisted company-wide performance, availability, factory or revenue claim is asserted. [S16]Company-stated

Frequently asked questions

What Drag Chain Cable product is documented for Amphenol TPC Wire & Cable?

The retained product material names Trex-Onics Overall Shielded Continuous Flex Multi-Conductor Cable. The dossier keeps this as a product-level statement rather than using it as a claim about the company's entire catalogue. [S6]

Which published electrical and temperature should a buyer compare?

The cited product material records: 600 V rating and 105 degrees C maximum conductor temperature. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S4]

Which published bend radius should a buyer compare?

The cited product material records: Static bend radius 6 x cable outside diameter; dynamic bend radius 8 x outside diameter. Use the value as a product-level comparison point, while keeping the exact model and installation boundaries in the cited route. [S5]

Which common buying fields are not published in the retained sources?

The retained source packet does not publish Annual sales, Availability or stock. Those fields are intentionally left out of the procurement snapshot rather than inferred from a related series, a product image or the company identity. [S10][S16]

Research notes

The retained first-party packet supports a richer product-level reading surface, but it does not yet contain 600 words of distinct cited content. This noindex dossier remains in reviewing status until additional source-backed facts are retained.